• When walls and floor settle, it can make door panels hard to open
• The installation of these hinges allows easy adjustment of the door in both the horizonal direction (+/-2 mm) and the vertical direction (+/-3 mm)
• The adjustment is made by turning a screw after installation.
• Each hinge is reversible and has maintenance free bearings
• DIMENSIONS; Hinge measures 4" wide in the open position. Hinge measures 4" tall not including the top of the hinge pin. There is a thin leaf and a thick leaf. The thin leaf is 3/32" in thickness. The thick leaf is 11/32" in thickness.
• PLEASE NOTE BEFORE ORDERING: Each door panel requires one "Set Hinge" and two "Guide Hinges"
• PLEASE NOTE BEFORE ORDERING: The jamb side of this hinge has a thicker than normal leaf and will require a deeper mortise than usual.
• The vertical adjustment is made with the "Set Hinge"
• The horizontal adjustment is made with the "Guide Hinges"
• Screws are not included. The door side (thin side of hinge) requires 4 each #10 flat head screws. The jamb side (thick side of hinge) requires 4 each #8 flat head screws.
• In the photo to the left the hinge pin is shown slightly lifted which is the way the product is shipped.

Finishes:

• Dark Brown Powder Coat
• Matte Black Powder Coat
• The Dark Brown Powder Coat is the best match for Oil Rubbed Bronze
• White Powder Coat

• This hinge solves the problem of doors that need adjustment because they do not fit the door frame. This can be caused when the floor or walls of the house settle.
• The 2-Way Adjustable hinge incorporates both the vertical adjustment and the horizontal adjustment in one hinge.
• Hinges are non-handed, they work on both right hand and left hand doors.
• This is the regular version of this hinge. It is available in 12 different finishes. Finish shown in image is Satin Silver.
• The horizontal adjustment range is plus or minus 0.15 inch (+/- 0.15").
• The vertical adjustment range is plus or minus 0.20 inch (+/- 0.20").
• There are markings on the hinge cover for a visual indication of the vertical adjustment position.
• 3 hinges will support a 400 lb. door.
• Made from die cast material and hard plastic. Adjusts with a square drive (Robertson drive).
• These hinges come with plastic tips. The colors may differ from the hinge finish. The colors are noted below.
• PLEASE NOTE: Use hand tools only to make adjustments (no power tools).
• PLEASE NOTE: Each hinge uses 8 each #8 Flat Head WoodScrews. Wood screws are not included with the product and must be obtained separately.
• The adjustable hinge leaf is 5/8" in thickness. The other leaf is 1/8" thick.
• This is the "Regular Model" of this hinge. Also available are
  • NRP Models (Non-Removable Hinge Pin)
  • Solid Brass Models
  • Solid Brass NRP Models

• This is the NRP (Non Removable Hinge Pin) model of this product.
• This hinge solves the problem of doors that need adjustment because they do not fit the door frame. This can be caused when the floor or walls of the house settle.
• The 2-Way Adjustable hinge incorporates both the vertical adjustment and the horizontal adjustment in one hinge.
• Hinges are non-handed, they work on both right hand and left hand doors.
• This is the regular version of this hinge. It is available in 12 different finishes. Finish shown in image is Satin Silver.
• The horizontal adjustment range is plus or minus 0.15 inch (+/- 0.15").
• The vertical adjustment range is plus or minus 0.20 inch (+/- 0.20").
• There are markings on the hinge cover for a visual indication of the vertical adjustment position.
• 3 hinges will support a 400 lb. door.
• Made from die cast material and hard plastic. Adjusts with a square drive (Robertson drive).
• These hinges come with plastic tips. The colors may differ from the hinge finish. The colors are noted below.
• PLEASE NOTE: Use hand tools only to make adjustments (no power tools).
• PLEASE NOTE: Each hinge uses 8 each #8 Flat Head Wood Screws. Wood screws are not included with the product and must be obtained separately.
• The adjustable hinge leaf is 5/8" in thickness. The other leaf is 1/8" thick.
• This is the "NRP Model" of this hinge. NRP means Non-Removable Pin. This model is generally used for doors that open outward. The Non-Removable Pin feature keeps someone from removing the hinge pin which would allow them to pull the door off of the hinges. Also available are
  • Regular Model (hinge pin is removable)
  • Solid Brass Models
  • Solid Brass NRP Models

• This is theSolid Brassmodel of this product. The hinge is made of solid brass and hard plastic with stainless steelinternal parts.
• This hinge solves the problem of doors that need adjustment because they do not fit the door frame. This can be caused when the floor or walls of the house settle.
• The 2-Way Adjustable hinge incorporates both the vertical adjustment and the horizontal adjustment in one hinge.
• Hinges are non-handed, they work on both right hand and left hand doors.
• The horizontal adjustment range is plus or minus 0.15 inch (+/- 0.15").
• The vertical adjustment range is plus or minus 0.20 inch (+/- 0.20").
• There are markings on the hinge cover for a visual indication of the vertical adjustment position.
• 3 hinges will support a 400 lb. door.
• Adjusts with a square drive (Robertson drive).
• These hinges come with plastic tips. The colors may differ from the hinge finish. The colors are noted below.
• PLEASE NOTE: Use hand tools only to make adjustments (no power tools).
• PLEASE NOTE: Each hinge uses 8 each #8 Flat Head Wood Screws. Wood screws are not included with the product and must be obtained separately.
• The adjustable hinge leaf is 5/8" in thickness. The other leaf is 1/8" thick.
• This hingeis available in two finishes; Satin Nickel and Brass PVD. Photo shows Brass PVD finish
• This hinge is also available in two models: Regular and "NRP". NRP means Non-Removable Pin. The NRPmodel is generally used for doors that open outward. The Non-Removable Pin feature keeps someone from removing the hinge pin which would allow them to pull the door off of the hinges.