• Solid bronze Architectural Grade hinges in a true Oil Rubbed Bronze finish with ball bearings (An Oil Rubbed Bronze finish on a solid bronze hinge is far superior to an oil rubbed bronze finish on a solid brass hinge). Ball bearing hinges provide less friction for heavier doors and for doors requiring door closers.
• Architectural Grade butt hinges are thicker and of much higher quality than Residential Grade butt hinges.
• Hinges come with wood screws and machine screws.
• Ball bearings are permanently lubricated.
• Optional ball tips are available for these hinges. See link below for Type A Ball tips.
• PLEASE NOTE; These solid bronze ball bearing hinges contain ball bearings and the bearing raceway that will eventually rust if subjected to harsh weather conditions (especially marine weather and salt air conditions).

NRP (non-removable pin) hinges have a set screw in the barrel that is accessible only when door is swung open. This security feature deters someone from removing the hinge pin and the door.

In this section hinges are sold either by the PAIR or by the EACH. EACH means one hinge, PAIR means two hinges. In this section, if the hinge you want is sold by the PAIR, you may order by the half pair. For example if you want 3 hinges order 1.5 pair.

Finishes:

• 613 (US10B) Oil Rubbed Bronze

Architectural Grade Hinges are our highest quality hinges. The brass/bronze base material will never rust.

Architectural Grade Hinges are our highest quality hinges. Choose Stainless Steel for areas where corrosion is a problem or for the look of brushed Stainless Steel.

Architectural Grade Hinges are our highest quality hinges. Steel base material offers a great value in a high quality hinge. Lots of sizes and finishes to choose from.

• No mortise style hinge. Hinge installs as a normal full mortise butt hinge but no mortising is required.
• Leaves only a 1/8" gap after installation.
• Top leaf rides on a ball bearing located on the top of the hinge pin.
• Hinge is not handed, may be used on left or right opening doors.
• Hinge shown in photo is shown in the "door open" position.
• Hinge is a lift off hinge, door may be lifted off after hinge is installed without removing any screws.
• Made from solid type 304 stainless steel.
• Available in two sizes, a 4" high hinge and a 5" high hinge.
• The 4" hinge leaf is 1-5/8" wide not including the hinge barrel. The hinge barrel diameter is 5/8".
• The 5" hinge leaf is 1-3/8" wide not including the hinge barrel. The hinge barrel diameter is 3/4".
• Weight ratings listed below are for a pair of hinges.
• Stainless steel flat head screws are included.

Finishes:

• Satin Stainless Steel

Add finials to your door hinges to dress them up.

• Butt Hinge marker accurately marks and cuts the hinge outline.
• To use, determine the location of the hinge on the door edge and the door jamb.
• Then strike the butt marker with a hammer to the correct hinge depth.
• With a sharp chisel make a series of cuts inside the outline to prepare the mortise for the hinge.
• Made for wood doors and door jambs.
• Available in two sizes; for 3-1/2" x 3-1/2" hinges and for 4' x 4" hinges.

• Wood Screws with finishes that match our hinges
• Flat head phillips (countersunk)
• Solid Brass base material

Finishes:

• Oil Rubbed Bronze
• Lifetime Brass
• Polished Brass
• Satin Chrome
• Satin Nickel

• Flat Head Phillips Wood Screws
• #12 x 1-1/4"
• Steel base material

Finishes:

• Satin Chrome
• Oil Rubbed Bronze
• Satin Brass
• Satin Nickel
• Chrome
• Polished Brass
• Prime Coated Gray