No-Bore Concealed Hinges

No-Bore Concealed Hinges

4 Different Styles

No-Bore Concealed Hinge

No-Bore Concealed Hinge
  • Opens to 90 degrees.
  • Made for use with frameless cabinets.
  • Approximate size of hinge is 1-7/8" x 4-1/2".
  • For full-overlay, half-overlay, or inset doors.
  • When open, inside of door is flush cabinet style.
  • No hole boring or mounting plates required.
  • Maximum full overlay is 25/32".
  • For door thicknesses 5/8" to 3/4" and side panel thicknesses of 5/8" to 7/8"
  • Available in free swinging or self closing models.
  • Steel base material
  • Uses 8 each #6 pan head screws (not included. Screws are offered for purchase during checkout)
  • For hinges with bronze finish, order 8 each #286-252 per hinge (#6 x 5/8" pan head bronze screws).

Finishes:

  • Bronze plated
  • Nickel plated
Click here for Information & Pricing

No-Bore Concealed Hinge for Back-to-Back Doors

No-Bore Concealed Hinge for Back-to-Back Doors
  • Self-closing, concealed hinge.
  • Made for cabinets whose doors open back-to-back. Both doors will open without interfering with each other.
  • Made for use on frameless cabinets
  • Opening angle is 90 degrees.
  • Approximate size of hinge (when opened) is 1-7/8" x 4-1/2".
  • No hole boring or mounting plates required.
  • For full-overlay, half-overlay, or inset doors.
  • When open, the door is offset 1/2".
  • Maximum full overlay is 25/32".
  • When used on inset doors the maximum door thickness is 3/4".
  • Steel base material.
  • Uses 6 each #6 pan head screws per hinge(not included but offered for purchase during checkout).

Finishes:

  • Nickel plated
Click here for Information & Pricing

175 Degree Concealed Hinge

175 Degree Concealed Hinge
  • This heavy duty hinge allows smooth, silent, sag-free opening to 175 degrees
  • Hinge surface mounts to the inside of your frameless cabinet. Small screw holes are the only holes you need to drill.
  • Hinge works on 5 different applications: full overlay doors (maximum overlay is 3/4"), half-overlay doors, full inset doors, and mitered corner doors (click on link below for illustrations) It also works on 3/8" inset doors with a 3/8" lip (no illustration available)
  • For normal use the hinge can be used on door thicknesses up to 1"
  • If used on "back-to-back" cabinets a maximum of 13/16" is recommended
  • Hardened steel construction (.082 gauge steel)
  • Features spring closing mechanism so cabinet latches are not necessary
  • Cabinet must have at least a 4-1/8" depth. Hinge measures approximately 4" long by 1-5/8" by 2".
  • Screws are not included but are offered for purchase during checkout. Each hinge uses 10 each #6 pan head screws.

Finishes:

  • Nickel Plated
Click here for Information & Pricing

No-Bore Concealed Hinge, Small

No-Bore Concealed Hinge, Small
  • Opens to 90 degrees.
  • Made for use with frameless cabinets.
  • Approximate size of hinge is 1-5/8" x 3-3/4" (hinge in open position as in photo).
  • For full-overlay, half-overlay, or inset doors.
  • When open, inside of door is flush cabinet style.
  • No hole boring or mounting plates required.
  • Maximum full overlay is 25/32".
  • For door thicknesses 5/8" to 3/4" and side panel thicknesses of 5/8" to 7/8"
  • Hinge is self-closing.Self-closing means the hinge closes the door the last inch or so of travel. Keeps doorclosed against door frame so that a cabinet catch is not needed.
  • Steel base material, nickel finish.
  • Wood screws are included.
  • This hinge is sold by the pair (two hinges).
Click here for Information & Pricing

Lift-up Hinge

Lift-up Hinge
  • Heavy duty Lift-up hinge for overhead compartments.
  • For overlay doors.
  • Used in RV's, Kitchens, Buses, Trains, Aircraft and Furniture Built-ins.
  • Use for either 5/8" or 3/4" door thicknesses.
  • Recommended door size per pair of hinges is 20" by 11".
  • Suggested weight capacity per pair of hinges is from 1-1/2 lbs to 8-1/8 lbs.
  • Hinge features positive stops in both the open and closed positions.
  • Surface mounted and completely invisible when door is closed
  • Made from steel, nickel plated..
  • Hinge holds open at 75 degrees.
  • Screws are not included but are offered for purchase during checkout. Each hinge uses 8 each #6 pan head screws.
Click here for Information & Pricing
accredited business BBB
Sign up for email updates from HardwareSource and get 5% OFF your next order!
Email:

see what customers are saying

Over 10,000 Reviews
5 Star Average

Thank you for helping us find the hinges no store had! We are were very happy to find the hinges we were looking for - they look great ...
High quality, received them promptly without special shipping. Great quality, saved over 100.00 over Home Depot. ... (Read review)
Guaranteed: All Valid Reviews Posted
StatisticsReview of HardwareSource.com

Related Products