Salice Silentia Soft Close Hinges

Salice Silentia Soft Close Hinges

  • European hinges with a soft close action.
  • When the door is pushed to close, the hinge decelerates the closing action.
  • The decelerating system is completely hidden from view and fully integrated into the hinge components.
  • Made by Salice.
  • Available in 3 different models

Salice Silentia Hinge, Straight Arm for Frameless Cabinets

Salice Silentia Hinge, Straight Arm for Frameless Cabinets
  • Silentia Soft Close Hinge made by Salice.
  • Hinge features;
    • Built-in soft close function.
    • When the door is pushed closed, the hinge acts to decelerate the closing action.
    • Keeps doors from slamming shut.
    • The soft-close mechanism is completely hidden from view and is fully integrated into the hinge components.
  • The straight arm model shown on this page with one of the mounting plates shown on this page is made for an overlay door on a frameless cabinet. It will accomodate overlay dimensions of 9 to 21mm (approximately 11/32" to 27/32"). This hinge works best for "Full Overlay" doors. See Overlay and Bore Distance Chart at link below.
  • The hinge opens to 105 degrees. It fits into a 35mm cup drilled in the back of the door.
  • The minimum cup depth required is 12mm. This makes this hinge excellent for a retrofit of an existing European hinge system because it does not require an extra deep cup depth.
  • The hinge screw hole pattern is the standard "Blum" screw hole pattern (45mm between screw hole centers).
  • Hinges and mounting plates are adjustable after installation. Mounting plates and hinges connect by "snapping" together.
  • PLEASE NOTE: European hinges are made up of two parts; the hinge and a mounting plate (sold separately). You would normally order 2 hinges and 2 mounting plates per door.
  • This hinge does not come with screws or dowels, but they are offered for purchase during checkout.
Click here for Information & Pricing

Salice Silentia Hinge, Straight Arm for Face Frame Cabinets

Salice Silentia Hinge, Straight Arm for Face Frame Cabinets
  • Silentia Soft Close Hinge made by Salice.
  • The mounting plates combined with the hinge on this page are for Face Frame Cabinets.
  • Hinge features;
    • Built-in soft close function
    • When the door is pushed closed, the hinge acts to decelerate the closing action.
    • Keeps doors from slamming shut.
    • The soft-close mechanism is completely hidden from view and is fully integrated into the hinge components.
  • The straight arm model shown on this page with one of the mounting plates shown on this page is made for an overlay door on a face frame cabinet. It will accomodate overlay dimensions of 14 to 20mm (approximately 9/16" to 25/32"). This hinge works best for "Full Overlay" doors. See Overlay and Bore Distance Chart at link below.
  • The hinge opens to 105 degrees. It fits into a 35mm cup drilled in the back of the door.
  • The minimum cup depth required is 12mm. This makes this hinge excellent for a retrofit of an existing European hinge system because it does not require an extra deep cup depth.
  • The hinge screw hole pattern is the standard "Blum" screw hole pattern (45mm between screw hole centers).
  • Hinges and mounting plates are adjustable after installation. Mounting plates and hinges connect by "snapping" together.
  • PLEASE NOTE: European hinges are made up of two parts; the hinge and a mounting plate (sold separately). You would normally order 2 hinges and 2 mounting plates per door.
  • This hinge does not come with screws or dowels, but they are offered for purchase during checkout..
Click here for Information & Pricing

Salice Silentia Hinge, Half Crank Hinge for Back-to-Back Cabinets

Salice Silentia Hinge, Half Crank Hinge for Back-to-Back Cabinets
  • Silentia Soft Close Hinge made by Salice.
  • Hinge features;
    • Built-in soft close function.
    • When the door is pushed closed, the hinge acts to decelerate the closing action.
    • Keeps doors from slamming shut.
    • The soft-close mechanism is completely hidden from view and is fully integrated into the hinge components.
  • The Half-Cranked model shown on this page with one of the mounting plates shown on this page is made for cabinet with "Back-to-Back" doors (also known as "Twin Overlay Doors"). It will accomodate overlay dimensions of 1 to 12mm (maximum overlay of 15/32"). See Overlay and Bore Distance Chart at link below.
  • Twin overlay doors need a gap (known as the "reveal") between the edges (hinged sides) of the two doors. Please consult the information at the link below for the minimum reveal that you need when installing these doors. The Minimum Reveal chart at the link below shows the minimum reveal needed based on the thickness of the doors.
  • The hinge opens to 105 degrees. It fits into a 35mm cup drilled in the back of the door.
  • The minimum cup depth required is 12mm. This makes this hinge excellent for a retrofit of an existing European hinge system because it does not require an extra deep cup depth.
  • The hinge screw hole pattern is the standard "Blum" screw hole pattern (45mm between screw hole centers).
  • Hinges and mounting plates are adjustable after installation. Mounting plates and hinges connect by "snapping" together.
  • PLEASE NOTE: European hinges are made up of two parts; the hinge and a mounting plate (sold separately). You would normally order 2 hinges and 2 mounting plates per door.
  • This hinge does not come with screws or dowels, but they are offered for purchase during checkout.
Click here for Information & Pricing

Salice Silentia Hinge, Full Cranked Hinge for Frameless Inset Doors

Salice Silentia Hinge, Full Cranked Hinge for Frameless Inset Doors
  • Silentia Soft Close Hinge made by Salice.
  • The mounting plate combined with the hinge on this pageis for an Inset Door on a Frameless Cabinet.
  • Hinge features;
    • Built-in soft close function
    • When the door is pushed closed, the hinge acts to decelerate the closing action.
    • Keeps doors from slamming shut.
    • The soft-close mechanism is completely hidden from view and is fully integrated into the hinge components.
  • Thefull crankedmodel shown on this page with mounting plate (SKU 796702)shown on this page is made for aninset door on a frameless cabinet. For more information, click on the link below.
  • The hinge opens to 105 degrees. It fits into a 35mm cup drilled in the back of the door.
  • The minimum cup depth required is 12mm. This makes this hinge excellent for a retrofit of an existing European hinge system because it does not require an extra deep cup depth.
  • The hinge screw hole pattern is the standard "Blum" screw hole pattern (45mm between screw hole centers).
  • Hinges and mounting plates are adjustable after installation. Mounting plates and hinges connect by "snapping" together.
  • PLEASE NOTE: European hinges are made up of two parts; the hinge and a mounting plate (sold separately). You would normally order 2 hinges and 2 mounting plates per door.
  • This hinge does not come with screws or dowels, but they are offered for purchase during checkout..
Click here for Information & Pricing
accredited business BBB
Sign up for email updates from HardwareSource and get 5% OFF your next order!
Email:

see what customers are saying

Over 10,000 Reviews
5 Star Average

quick searchabilitiy to find product, easy to order and pay, delivery prompt see summary review ...
Thank you for helping us find the hinges no store had! We are were very happy to find the hinges we were looking for - they look great ...
Guaranteed: All Valid Reviews Posted
StatisticsReview of HardwareSource.com

Related Products