• For entertainment centers, armoires and kitchen cabinets. Allows the door to open to 90 degrees and slide back into the inside of the cabinet
• For door heights up to 42" tall
• For door thickness of 5/8" to 13/16"
• Maximum door weight is 30 lbs.
• For "inset" cabinets without a face frame or "overlay" cabinets with a face frame.
• For "non-face frame overlay" applications add a Non-Face Frame Overlay Hinge Kit (order our number 268119)
• Sold by the set. Purchase one set for each door.
• Can be used for vertical or horizontal doors
• complete with all hardware
• To see the instruction sheets for this product click on Page 1, 2 and 3 below.

Finishes:

• Black

• This hinge kit works with our Pivot Door Slides for "Overlay Applications" where there is no face frame.
• For more information on this item see our "Pivot Door Slides" and click on the Technical Info link
• These items require a 40mm cup drilled in the door to install.
• A set includes 2 hinges. One set is needed per door.
• Hinges are a half cranked 40mm hinge, platesare 0mm. Height to upper pivot point is 1".

Finishes:

• nickel finish

• For entertainment centers, armoires, and kitchen cabinets. Allows the door to open to 90 degrees and then slide back into the inside of the cabinet.
• This hardware works on frameless (no face frame) cabinets only.
• Hardware includes "AntiRak Cable System"
• For door heights from 36" to 78"
• This product will work for 3 different installation types;
  • Type 1 is an "overlay" door (no face frame) with a 3/4" door thickness. Order our Type 1 hinge kit (SKU 268173) for this installation type.
  • Type 2 is a "flush inset" door (no face frame) with a door thickness from 3/4" to 13/16". Order our Type 2 hinge kit (SKU 268171) for this installation type.
  • Type 3 is a a "flush inset" door (no face frame) with a door thickness from 15/16" to 1-1/4". Order our Type 3 hinge kit (SKU 268172) for this installation type.
• Maximum door weight is 75 lbs.
• Can be used for vertical or horizontal doors.
• A 2" to 2-1/2" wide pocket is required. The pocket is the area that the door slides into.
• An 8 page instruction booklet is included with purchase.
• This product is sold by the pair. Order one pair for each door that you are hanging.
• PLEASE NOTE: THE FOLLOWING ADDITIONAL HARDWARE IS REQUIRED (ITEMS ARE OFFERED FOR PURCHASE DURING CHECKOUT);
  • HINGE CARRIER STRIP KITS
  • HINGE KITS (Type 1, 2 or 3)
  • SEE THOSE ITEMS FOR MORE INFORMATION

Finishes:

• Black

• This hinge kit works with our Heavy Duty Pivot Door Slides.
• It is used for "overlay" doors (no face frame) with a 3/4" door thickness.
• These hinges require a 40mm cup to be drilled in the door.
• They are sold by the set. A set includes 2 hinges, 2 mounting plates, mounting plate spacers, all necessary screws and mounting plate covers.
• Hinges are 40mm Straight Arm European hinges, plates are 0mm plates.
• Use 3 hinges per door for door heights from 36" to 47".
• Use 4 hinges per door for door heights from 47" to 59".
• Use 5 hinges per door for door heights from 59" to 71".
• Use 6 hinges per door for door heights over 71".

Finishes:

• Zinc Finish

• This hinge kit works with our Heavy Duty Pivot Door Slides.
• It is used for "flush inset" doors (no face frame) with a door thickness from 3/4" to 13/16".
• For overlay doors or doors thicker than 13/16" use our Type 3 Hinge Kit (SKU 268172).
• These hinges require a 35mm cup to be drilled in the door.
• Hinges are 35mmStraight Arm European hinges with 2 mm plates.
• They are sold by the set. A set includes 2 hinges, 2 mounting plates, mounting plate spacers, all necessary screws and mounting plate covers.
• Use 3 hinges per door for door heights from 36" to 47".
• Use 4 hinges per door for door heights over 47" to 59".
• Use 5 hinges per door for door heights over 59" to 71".
• Use 6 hinges per door for door heights over 71".

Finishes:

• Black Finish

• This hinge kit works with our Heavy Duty Pivot Door Slides.
• It is used for "flush inset" doors (no face frame) with a door thickness from 15/16" to 1-1/4".
• These hinges require a 40mm cup to be drilled in the door.
• They are sold by the set. A set includes 2 hinges, 2 mounting plates, 4 mounting plate spacers, all necessary screws and mounting plate covers.
• Hinges are 40mm half cranked hinges, plates are 3 mm plates. Height to upper pivot point without spacer attached is 1-1/8". Height with one spacer attached is 1-1/4". Withboth spacers attached, it is 1-3/8".
• Use 3 hinges per door for door heights from 36" to 47".
• Use 4 hinges per door for door heights over 47" to 59".
• Use 5 hinges per door for door heights over 59" to 71".
• Use 6 hinges per door for door heights over 71".

Finishes:

• Zinc Finish

• This hinge carrier strip kit works with our Heavy Duty Pivot Door Slides
• Each carrier strip measures approximately 29" by 4"
• They are sold by the set. A set includes 2 carrier strips, 3 connector clips, and all necessary screws.
• Use 2 strips per door for door heights from 36" to 56"
• Use 3 strips per door for door heights over 56"

Finishes:

• Black Finish

• Over-the-Top Flipper Door slide allows cabinet door to be opened from the bottom, pivoted up and slid back on top of the cabinet.
• Closes with "soft down" action, slows the speed and dampens the closing action. (Maximum door weight is 30lbs.)
• For frameless cabinets, door is installed as an overlay door.
• Door should be a minimum of 3/4" thick. The best installation for this product is to route out a hollow in the back of the door to fit the slide into.
• Requires few or no cabinet modifications and is easy to install.
• Door closing speed remains similiar on light and heavy doors.
• All hardware mounts inside the cabinet so that no hardware interferes with cabinets mounted to either side.
• For doors up to a maximum 48" in width and 30 lbs. in weight.
• Available in 7 different slide lengths (12", 14", 16", 18", 20", 22", 24").
• Included in package
  • One pair of Over-the-Top Flipper Door Slides (installs one door)
  • Installation Instructions
  • Fasteners
  • Mounting brackets for use if installing on particle board
  • Plastic covers for soft down piston
• Considerations for choosing slide length
  • Choose a slide length that matches as closely as possible your door height (but not shorter than the door height)
  • Consider your cabinet depth. If your door is tall and your cabinet is shallow there will be a large overhang when the door is in the open position (slid back on top of the cabinet).
• Finish is black coated.
• PLEASE NOTE: This product can only be installed on "Frameless cabinets" with a 3/4" top panel thickness. Frameless cabinets do not have a face frame. Click on link below to see the difference between a face frame cabinet and a frameless cabinet.

• High speed steel forstner bit for cutting 35mm (1-3/8") cup for European hinges.
• Fits 3/8" drill chuck.
• Product works best with a drill press however it is possible to use it with a portable power drill.
• Made by Bosch.
• PLEASE NOTE: This product is meant for use on hardwoods and softwoods. It is not meant for use on particle board or MDF materials. It is actually sized as a 1-3/8" cutter. This size works perfectly for a 35mm European hinge.
• For Amerock, Belwith, Blum, Grass, Liberty, Mepla, Hafele and other hinges
• PLEASE NOTE: Our normal return policy does not apply to this item. This item is NOT returnable.

• Carbide tipped drill bit for cutting 40mm holes for European hinges.
• Fits 3/8" drill chuck.
• Bit is 2-3/16" in length.
• PLEASE NOTE; Our normal return policy does not apply to this item. This item is NOT returnable.