Pivot Door Slides

Pivot Door Slides

  • Pivot door slides allow your door to pivot open and then slide back into the sides of the cabinet.
  • Great for entertainment centers.
  • Available in Regular Duty and Heavy Duty.
  • Also known as Flipper Door Slides.
  • Also known as Pocket Door Slides.

Pivot Door Slides

Pivot Door Slides
  • For entertainment centers, armoires and kitchen cabinets.
  • Allows the door to open to 90 degrees and slide back into the inside of the cabinet.
  • For door heights up to 42" tall
  • For door thickness of 5/8" to 13/16".
  • Maximum door weight is 30 lbs.
  • For "inset" cabinets without a face frame or "overlay" cabinets with a face frame.
  • For "non-face frame overlay" applications add a Non-Face Frame Overlay Hinge Kit (order our number 268119).
  • This product ships with 35mm diameter cup hinges.
  • Sold by the set. Purchase one set for each door.
  • Can be used for vertical or horizontal doors
  • Complete with all hardware
  • To see the instruction sheets for this product click on Page 1, 2 and 3 below.

Finishes:

  • Black
Click here for Information & Pricing

Non-face Frame Overlay Hinge Kit

Non-face Frame Overlay Hinge Kit
  • This hinge kit works with our Pivot Door Slides for "Overlay Applications" where there is no face frame.
  • For more information on this item see our "Pivot Door Slides" and click on the Technical Info link
  • These items require a 40mm cup drilled in the door to install.
  • A set includes 2 hinges. One set is needed per door.
  • Hinges are a half cranked 40mm hinge, platesare 0mm. Height to upper pivot point is 1".

Finishes:

  • nickel finish
Click here for Information & Pricing

Heavy Duty Pivot Door Slides

Heavy Duty Pivot Door Slides
  • For entertainment centers, armoires, and kitchen cabinets. Allows the door to open to 90 degrees and then slide back into the inside of the cabinet.
  • This hardware works on frameless (no face frame) cabinets only.
  • Hardware includes "AntiRak Cable System"
  • For door heights from 36" to 78"
  • This product will work for 3 different installation types;
    • Type 1 is an "overlay" door (no face frame) with a 3/4" door thickness. Order our Type 1 hinge kit (SKU 268173) for this installation type.
    • Type 2 is a "flush inset" door (no face frame) with a door thickness from 3/4" to 13/16". Order our Type 2 hinge kit (SKU 268171) for this installation type.
    • Type 3 is a a "flush inset" door (no face frame) with a door thickness from 15/16" to 1-1/4". Order our Type 3 hinge kit (SKU 268172) for this installation type.
  • Maximum door weight is 75 lbs.
  • Can be used for vertical or horizontal doors.
  • A 2" to 2-1/2" wide pocket is required. The pocket is the area that the door slides into.
  • An 8 page instruction booklet is included with purchase.
  • This product is sold by the pair. Order one pair for each door that you are hanging.
  • PLEASE NOTE: THE FOLLOWING ADDITIONAL HARDWARE IS REQUIRED (ITEMS ARE OFFERED FOR PURCHASE DURING CHECKOUT);
    • HINGE CARRIER STRIP KITS
    • HINGE KITS (Type 1, 2 or 3)
    • SEE THOSE ITEMS FOR MORE INFORMATION

Finishes:

  • Black
Click here for Information & Pricing

Type 1 Hinge Kit for Heavy Duty Pivot Door Slides

Type 1 Hinge Kit for Heavy Duty Pivot Door Slides
  • This hinge kit works with our Heavy Duty Pivot Door Slides.
  • It is used for "overlay" doors (no face frame) with a 3/4" door thickness.
  • These hinges require a 40mm cup to be drilled in the door.
  • They are sold by the set. A set includes 2 hinges, 2 mounting plates, mounting plate spacers, all necessary screws and mounting plate covers.
  • Hinges are 40mm Straight Arm European hinges, plates are 0mm plates.
  • Use 3 hinges per door for door heights from 36" to 47".
  • Use 4 hinges per door for door heights from 47" to 59".
  • Use 5 hinges per door for door heights from 59" to 71".
  • Use 6 hinges per door for door heights over 71".

Finishes:

  • Zinc Finish
Click here for Information & Pricing

Type 2 Hinge Kit (Black) for Heavy Duty Pivot Door Slides

Type 2 Hinge Kit (Black) for Heavy Duty Pivot Door Slides
  • This hinge kit works with our Heavy Duty Pivot Door Slides.
  • It is used for "flush inset" doors (no face frame) with a door thickness from 3/4" to 13/16".
  • For overlay doors or doors thicker than 13/16" use our Type 3 Hinge Kit (SKU 268172).
  • These hinges require a 35mm cup to be drilled in the door.
  • Hinges are 35mmStraight Arm European hinges with 2 mm plates.
  • They are sold by the set. A set includes 2 hinges, 2 mounting plates, mounting plate spacers, all necessary screws and mounting plate covers.
  • Use 3 hinges per door for door heights from 36" to 47".
  • Use 4 hinges per door for door heights over 47" to 59".
  • Use 5 hinges per door for door heights over 59" to 71".
  • Use 6 hinges per door for door heights over 71".

Finishes:

  • Black Finish
Click here for Information & Pricing

Type 3 Hinge Kit for Heavy Duty Pivot Door Slides

Type 3 Hinge Kit for Heavy Duty Pivot Door Slides
  • This hinge kit works with our Heavy Duty Pivot Door Slides.
  • It is used for "flush inset" doors (no face frame) with a door thickness from 15/16" to 1-1/4".
  • These hinges require a 40mm cup to be drilled in the door.
  • They are sold by the set. A set includes 2 hinges, 2 mounting plates, 4 mounting plate spacers, all necessary screws and mounting plate covers.
  • Hinges are 40mm half cranked hinges, plates are 3 mm plates. Height to upper pivot point without spacer attached is 1-1/8". Height with one spacer attached is 1-1/4". Withboth spacers attached, it is 1-3/8".
  • Use 3 hinges per door for door heights from 36" to 47".
  • Use 4 hinges per door for door heights over 47" to 59".
  • Use 5 hinges per door for door heights over 59" to 71".
  • Use 6 hinges per door for door heights over 71".

Finishes:

  • Zinc Finish
Click here for Information & Pricing

Hinge Carrier Strip for Heavy Duty Pivot Door Slides

Hinge Carrier Strip for Heavy Duty Pivot Door Slides
  • This hinge carrier strip kit works with our Heavy Duty Pivot Door Slides
  • Each carrier strip measures approximately 29" by 4"
  • They are sold by the set. A set includes 2 carrier strips, 3 connector clips, and all necessary screws.
  • Use 2 strips per door for door heights from 36" to 56"
  • Use 3 strips per door for door heights over 56"

Finishes:

  • Black Finish
Click here for Information & Pricing

Over-the-Top Flipper Door Slide

Over-the-Top Flipper Door Slide
  • Over-the-Top Flipper Door slide allows cabinet door to be opened from the bottom, pivoted up and slid back on top of the cabinet.
  • Closes with "soft down" action, slows the speed and dampens the closing action. (Maximum door weight is 30lbs.)
  • For frameless cabinets, door is installed as an overlay door.
  • Door should be a minimum of 3/4" thick. The best installation for this product is to route out a hollow in the back of the door to fit the slide into.
  • Requires few or no cabinet modifications and is easy to install.
  • Door closing speed remains similiar on light and heavy doors.
  • All hardware mounts inside the cabinet so that no hardware interferes with cabinets mounted to either side.
  • For doors up to a maximum 48" in width and 30 lbs. in weight.
  • Available in 7 different slide lengths (12", 14", 16", 18", 20", 22", 24").
  • Included in package
    • One pair of Over-the-Top Flipper Door Slides (installs one door)
    • Installation Instructions
    • Fasteners
    • Mounting brackets for use if installing on particle board
    • Plastic covers for soft down piston
  • Considerations for choosing slide length
    • Choose a slide length that matches as closely as possible your door height (but not shorter than the door height)
    • Consider your cabinet depth. If your door is tall and your cabinet is shallow there will be a large overhang when the door is in the open position (slid back on top of the cabinet).
  • Finish is black coated.
  • PLEASE NOTE: This product can only be installed on "Frameless cabinets" with a 3/4" top panel thickness. Frameless cabinets do not have a face frame. Click on link below to see the difference between a face frame cabinet and a frameless cabinet.

Click here for Information & Pricing

35 mm Replacement Hinge Set for Pivot Door Slides

35 mm Replacement Hinge Set for Pivot Door Slides
  • Replacement hinge and mounting plate system for Pivot Door Slides (also known as Flipper Door Slides). If you have a pivot door or flipper door that has a broken 35mm hinge, these hinges will replace them.
  • Hinge cup fits into a 35mm diameter hole (1-3/8").
  • Sold by the set; a set includes one hinge, one mounting plate and 4 tapered screws for wood or metal.
  • A typical flipper or pivot door will require that you order 2 sets per door to replace the hinges.
  • When replacing hinges it is necessary to replace all of the hinges and mounting plates on any door that you are working on. Mixing different brands of hinges can cause binding problems because they may have slightly differing articulations.
  • The screwhole center-to-center dimension for the hinge screws is 45mm (approximately 1-3/4").
  • The screwhole center-to-center dimension for the mounting plate is 32mm (approximately 1-1/4).
  • The mounting plate snaps onto the hinge and can be removed from the hinge by pressing on a small lever.
  • The hinges are adjustable after installation (in and out, up and down, and side to side) by means of 3 cam screws.
  • Made from steel and nickel plated.

How to size your hinge system

    • Make sure your existing hinge fits into a 35mm (1-3/8") diameter hole or cup.
    • Make sure your screwhole center-to-center measurements match those listed above. If yours differs it may be possible to alter your setup slightly to allow our 1-3/4" screw hole dimension.
    • Measure your pivot point height (upper pivot point). See link below for instructions on how to measure.
    • The hinges show a "pivot point range" because they are adjustable up and down.
    • The best choice will be a hinge where your pivot point height falls in the middle of one of the pivot point ranges shown.
Click here for Information & Pricing

40 mm Replacement Hinge Set for Pivot Door Slides

40 mm Replacement Hinge Set for Pivot Door Slides
  • Replacement hinge and mounting plate system for Pivot Door Slides (also known as Flipper Door Slides). If you have a pivot door or flipper door that has a broken 40mm hinge, these hinges will replace them.
  • Hinge cup fits into a 40mm diameter hole (approximately 1-9/16").
  • Sold by the set; a set includes one hinge, one mounting plate and 4 tapered screws for wood or metal.
  • A typical flipper or pivot door will require that you order 2 sets per door to replace the hinges.
  • When replacing hinges it is necessary to replace all of the hinges and mounting plates on any door that you are working on. Mixing different brands of hinges can cause binding problems because they may have slightly differing articulations.
  • The screwhole center-to-center dimension for the hinge screws is 52mm (approximately 2-1/16").
  • The screwhole center-to-center dimension for the mounting plate is 32mm (approximately 1-1/4).
  • The mounting plate snaps onto the hinge and can be removed from the hinge by pressing on a small lever.
  • The hinges are adjustable after installation (in and out, up and down, and side to side) by means of 3 cam screws.
  • Made from steel and nickel plated.

How to size your hinge system

    • Make sure your existing hinge fits into a 40mm diameter hole or cup.
    • Make sure your screwhole center-to-center measurements match those listed above. If yours differs it may be possible to alter your setup slightly to allow our 2-1/16" screw hole dimension.
    • Measure your pivot point height (upper pivot point). See link below for instructions on how to measure.
    • The hinges show a "pivot point range" because they are adjustable up and down.
    • The best choice will be a hinge where your pivot point height falls in the middle of one of the pivot point ranges shown.
Click here for Information & Pricing

35mm Forstner Bit for Euro Hinges

35mm Forstner Bit for Euro Hinges
  • High speed steel forstner bit for cutting 35mm (1-3/8") cup for European hinges.
  • Fits 3/8" drill chuck.
  • Product works best with a drill press however it is possible to use it with a portable power drill.
  • Made by Bosch.
  • PLEASE NOTE: This product is meant for use on hardwoods and softwoods. It is not meant for use on particle board or MDF materials. It is actually sized as a 1-3/8" cutter. This size works perfectly for a 35mm European hinge.
  • For Amerock, Belwith, Blum, Grass, Liberty, Mepla, Hafele and other hinges
  • PLEASE NOTE: Our normal return policy does not apply to this item. This item is NOT returnable.
Click here for Information & Pricing

40mm Bit for European Hinges

40mm Bit for European Hinges
  • Carbide tipped drill bit for cutting 40mm holes for European hinges.
  • Fits 3/8" drill chuck.
  • Bit is 2-3/16" in length.
  • PLEASE NOTE; Our normal return policy does not apply to this item. This item is NOT returnable.
Click here for Information & Pricing
accredited business BBB
Sign up for email updates from HardwareSource and get 5% OFF your next order!
Email:

see what customers are saying

Over 10,000 Reviews
5 Star Average

quick searchabilitiy to find product, easy to order and pay, delivery prompt see summary review ...
Thank you for helping us find the hinges no store had! We are were very happy to find the hinges we were looking for - they look great ...
Guaranteed: All Valid Reviews Posted
StatisticsReview of HardwareSource.com

Related Products