• Cabinet hinge made for overlay doors.
• This versitile hinge solves a lot of retrofit problems because it is a variable overlay hinge. After installation only the hinge pin barrel is visible on the edge of the cabinet door. No screws are visible after installation.
• This hinge is a variable overlay, it can be installed on any cabinet where the dooroverlays thecabinet opening by1/2" or greater.
• Hinge is self-closing.
• Matching wood screws are included.
• Hinge measures approximately 2-3/8" tall by 1-3/4" wide.
• Hinge needs a minimum of 7/8" on the face frame of the cabinet for installation.
• The center-to-center screw hole dimension for the hinge wing that mounts on the cabinet face frame is 1-13/16".

Finish:

• Satin Nickel (also known as Brushed Nickel or Dull Nickel)

• Cabinet hinge made for overlay doors.
• This versitile hinge solves a lot of retrofit problems because it is a variable overlay hinge. After installation only the hinge pin barrel is visible on the edge of the cabinet door. No screws are visible after installation.
• This hinge is a variable overlay, it can be installed on any cabinet where the door overlays the cabinet opening by 1/2" or greater.
• Hinge is self-closing.
• Matching wood screws are included.
• Hinge measures approximately 2-3/8" tall by 1-3/4" wide.
• Hinge needs a minimum of 7/8" on the face frame of the cabinet for installation.
• The center-to-center screw hole dimension for the hinge wing that mounts on the cabinet face frame is 1-13/16".

Finish:

• Oil Rubbed Bronze

• 270 degree hinge for cabinets with overlay doors.
• Designed for TV and entertainment units which need wide opening doors.
• Opens 270 degrees for unobstructed view when installed as a "full overlay" hinge (hinge pin needs to be at the corner of the cabinet).
• Can be recessed (mortised) into door for a sleek look.
• For doors 5/8" thick if the hinge is not mortised into the door and 7/8" if the hinge is mortised into the door.
• Solid brass base material.
• Hinge dimension: 1-9/16" tall, projects out from cabinet surface 1", attachment to backside of door is 1-3/8".
• Uses #6 flat head screws, 5 each per hinge (screws are not included but they are offered for purchase during checkout).
• Hinge shown in photo is the Polished Brass hinge. All parts of the hinge that are visible after installation are either a highly polished brass or a beautiful satin nickel.

Finishes:

• Polished Brass
• Satin Nickel

• 270 degree hinge for cabinets with overlay doors.
• Designed for TV and entertainment units which need wide opening doors.
• Opens 270 degrees for unobstructed view when installed as a "full overlay" hinge (hinge pin needs to be at the corner of the cabinet).
• Can be recessed (mortised) into door for a sleek look.
• For doors 3/4" thick if the hinge is not mortised into the door and 15/16" if the hinge is mortised into the door.
• Solid brass base material.
• Hinge dimension: 1-9/16" tall, projects out from cabinet surface 1-5/16", attachment to backside of door is 1-3/8".
• Uses #6 flat head screws, 5 each per hinge (screws are not included but they are offered for purchase during checkout).
• Hinge shown in photo is the Polished Brass hinge. All parts of the hinge that are visible after installation are either a highly polished brass or a beautiful satin nickel.

Finishes:

• Polished Brass
• Satin Nickel

• Overlay door pivot hinge, made from Type 430 stainless steel.
• IMPORTANT, PLEASE NOTE; These hinges are "handed". Order one left hand (SKU 658003)and one right hand hinge (SKU 658017) for each door you are installing.
• PLEASE NOTE; the handing refers to where the hinge is located not whether the door is a left hand or right hand door. If you order a left hand hinge and a right hand hinge you can hinge either a right hand door or a left hand door.
• Made for 3/4" thick doors.
• Maximum door size: 17-23/32" wide 27-9/16" height.
• These pivots are rated to hold 5.7 lbs per pair.
• May be used as a 270 degree hinge if the pivot point is located just outside of the cabinet corner.
• Each hinge uses 6 each #8 flat head screws. Not included but offered for purchase during checkout.

Finishes:

• Stainless Steel, Natural

• Made for overlay cabinet doors up to 1" thick
• Hinge pivots 270 degrees
• The plate that attaches to the cabinet measures 1-1/4" x 1". The plate that attaches to the door measures 1-3/8" x 7/8". The pivot point projects out 1-7/16" from the cabinet surface
• Steel base material
• Screws not included
• Uses 12 each #6 screws per pair of hinges(not included). We have not been able to find an exact finish match for the screws. We offer solid brass screws upon checkout which is fairly good match for the finish but not an exact match.

Finishes:

• Antique Brass

• Self closing hinge.
• Steel base material.
• Frame leaf has elongated holes which allow for easy adjustment of hinge during installation.
• Flat head wood screws (#6 x 5/8") are included.
• The center-to-center screwhole dimension for the hinge wing that mounts on the face frame is 1-13/16".
• The minimum amount of space needed on cabinet face frame to install this hinge is 7/8".

Finishes:

• Burnished Brass

• Pivot hinges made from Type 430 stainless steel.
• These pivot hinges are available in both Left Hand and Right Hand models and are available in two sizes.
• May be used as 270 degree hinges if the pivot point is located just outside of the cabinet corner.
• Available in two sizes; the small size fits up to a 11/16" thick door, the large size fits up to a 7/8" thick door.
• For each door you are hinging order one left hand hinge and one right hand hinge.
• Each hinge uses 4 to 6 each #4 flat head screws, not included but offered for purchase during checkout.

Finishes:

• Natural Stainless Steel

• For 1-1/8" to 1-3/8" thick doors
• Reversible (non-handed) for Right Hand or Left Hand installations
• For doors up to 60" high (75lb maximum weight)
• For overlay type installations
• Made from 0.125" steel
• Wood screws are included
• Horizontal piece (as shown in photo) measures 2-1/2" x 1"
• Vertical flat piece (which mounts to wall) measures 3" x 7/8"
• Rounded piece projects from wall 2-1/2"
• Sold by the pair. A pair is what is required to install one door.

Finishes:

• Satin Chrome
• Polished Brass

• For cabinets with overlay doors
• This hinge will allow doors to open 270 degrees for an unobstructed view when installed as a "full overlay" hinge (hinge needs to be placed at the corner of the cabinet).
• For doors that are 1" to 1-1/4" thick.
• This hinge needs at least 1" of face frame or side wall edge for the hinge to mount to (the bent part of the hinge measures 1")
• Steel base material.
• Hinge shown in photo is the Brass plated finish.
• Matching wood screws are included.

Finishes:

• Brass Plated