Tools for European Hinges

Refine by Category:

Blum Ecodrill (1)	35mm Forstner Bit for Euro Hinges (1)
40mm Bit for European Hinges (1)	Blum Platemate (1)

Blum Ecodrill

The Blum Ecodrill (M31.1000) is a jig or template for drilling the 35mm cup in the back of a cabinet door for European hinges.
This drilling device is powered by an electric or cordless (18V or higher) power drill (not included).
This device is used by professional cabinet makers and amateurs alike with excellent results.
The deviceis adjustable forthe cup depth and the bore distance (also known as the "tab").
It will also drill the 8mm holes if you are using dowels. If you are using wood screws it will mark the drillinglocation for you.
Adjustable for bore distances from 2mm to 8mm and will clamp on to various door thicknesses up to 40mm.
The Blum Ecodrill drills for the Blum European Hinge boring pattern (now standard among many European hinge manufacturers);
- 45mm between screw holes
- 35mm cup diamter
- 9.5mm from center of screw hole to center of 35mm cup
Included with the Ecodrill (pre-installed) are;
- 35mm bit
- 8mm bits (2 each) for drilling the dowel holes or marking the wood screw locations
- Two Torx bits which fit into your electric drill and drive the drill bits on the device
PLEASE NOTE: OUR NORMAL RETURN POLICY DOES NOT APPLY TO THIS TOOL. THIS PRODUCT IS NOT RETURNABLE FOR CREDIT OR REFUND.

High speed steel forstner bit for cutting 35mm (1-3/8") cup for European hinges.
Fits 3/8" drill chuck.
Product works best with a drill press however it is possible to use it with a portable power drill.
Made by Bosch.
PLEASE NOTE: This product is meant for use on hardwoods and softwoods. It is not meant for use on particle board or MDF materials. It is actually sized as a 1-3/8" cutter. This size works perfectly for a 35mm European hinge.
For Amerock, Belwith, Blum, Grass, Liberty, Mepla, Hafele and other hinges
PLEASE NOTE: Our normal return policy does not apply to this item. This item is NOT returnable.

Carbide tipped drill bit for cutting 40mm holes for European hinges.
Fits 3/8" drill chuck.
Bit is 2-3/16" in length.
PLEASE NOTE; Our normal return policy does not apply to this item. This item is NOT returnable.

Platemate drilling template by Blum
Blum's Platemate is a boring template for all Blum face frame adapter plates
Clamps to the face frame with a cam lever.
Accomodates face frame thicknesses of 5/8" to 1".
Spacer screws permit quick use without measuring
Includes:
- 2.5mm pilot drill and drill bit extension
- reversible bushing insert for 32mm hole spacing
- reversible bushing insert for 40mm hole spacing
- bushings reverse from 9.5mm to 12.5mm set back.
PLEASE NOTE: OUR NORMAL RETURN POLICY DOES NOT APPLY TO THIS ITEM. THE BLUM PLATEMATE IS A NON-RETURNABLE ITEM.