Salice Silentia Soft Close Hinges

Refine by Category:

Salice Silentia Hinge, Straight Arm for Frameless Cabinets

Silentia Soft Close Hinge made by Salice.
Hinge features;
- Built-in soft close function.
- When the door is pushed closed, the hinge acts to decelerate the closing action.
- Keeps doors from slamming shut.
- The soft-close mechanism is completely hidden from view and is fully integrated into the hinge components.
The straight arm model shown on this page with one of the mounting plates shown on this page is made for an overlay door on a frameless cabinet. It will accomodate overlay dimensions of 9 to 21mm (approximately 11/32" to 27/32"). This hinge works best for "Full Overlay" doors. See Overlay and Bore Distance Chart at link below.
The hinge opens to 105 degrees. It fits into a 35mm cup drilled in the back of the door.
The minimum cup depth required is 12mm. This makes this hinge excellent for a retrofit of an existing European hinge system because it does not require an extra deep cup depth.
The hinge screw hole pattern is the standard "Blum" screw hole pattern (45mm between screw hole centers).
Hinges and mounting plates are adjustable after installation. Mounting plates and hinges connect by "snapping" together.
PLEASE NOTE: European hinges are made up of two parts; the hinge and a mounting plate (sold separately). You would normally order 2 hinges and 2 mounting plates per door.
This hinge does not come with screws or dowels, but they are offered for purchase during checkout.

Silentia Soft Close Hinge made by Salice.
The mounting plates combined with the hinge on this page are for Face Frame Cabinets.
Hinge features;
- Built-in soft close function
- When the door is pushed closed, the hinge acts to decelerate the closing action.
- Keeps doors from slamming shut.
- The soft-close mechanism is completely hidden from view and is fully integrated into the hinge components.
The straight arm model shown on this page with one of the mounting plates shown on this page is made for an overlay door on a face framecabinet. It will accomodate overlay dimensions of14 to 20mm (approximately 9/16" to 25/32"). This hinge works best for "Full Overlay" doors. See Overlay and Bore Distance Chart at link below.
The hinge opens to 105 degrees. It fits into a 35mm cup drilled in the back of the door.
The minimum cup depth required is 12mm. This makes this hinge excellent for a retrofit of an existing European hinge system because it does not require an extra deep cup depth.
The hinge screw hole pattern is the standard "Blum" screw hole pattern (45mm between screw hole centers).
Hinges and mounting plates are adjustable after installation. Mounting plates and hinges connect by "snapping" together.
PLEASE NOTE: European hinges are made up of two parts; the hinge and a mounting plate (sold separately). You would normally order 2 hinges and 2 mounting plates per door.
This hinge does not come with screws or dowels, but they are offered for purchase during checkout..