Medicine Cabinet Hinges

Medicine Cabinet Hinges

  • Replacement hinges for medicine bathroom cabinets.
  • Available in 3 cup sizes (26mm, 35mm and 40mm).
  • Available in 16 different pivot heights.
  • Hinge sets include the hinge, mounting plate and mounting screws.

26 mm Medicine Cabinet Hinge

26 mm Medicine Cabinet Hinge
  • Replacement hinge and mounting plate system for Medicine Cabinets.
  • Hinge cup fits into a 26mm diameter hole (slightly larger than 1", measures 1.016").
  • The screwhole center-to-center dimension for the hinge screws is 1-1/2".
  • The screwhole center-to-center dimension for the mounting plate is 1-1/4".
  • The mounting plate snaps on the the hinge and can be removed from the hinge by pressing on a small lever.
  • The hinges are adjustable after installation (in and out, up and down, and side to side) by means of 3 cam screws.
  • When replacing hinges on a medicine cabinet it is necessary to replace all of the hinges and mounting plate on any door that you are working on. Mixing different brands of hinges can cause binding problems because they may have slightly differing articulations.
  • Sold by the set; a set includes one hinge, one mounting plate and 4 tapered screws for wood or metal.
  • Most medicine cabinet doors will need 2 sets per door.
  • Made from steel and nickel plated. Opening angle is 95 degrees.
  • PLEASE NOTE: The hinge and mounting plate combination that you receive may look slightly different from what you see in the above image. To achieve all of the different pivot point heights we use 3 different hinge types and 5 different mounting plate heights.

How to size your hinge system

    • Make sure your existing hinge fits into a 26mm diameter hole or cup.
    • Make sure your screwhole center-to-center measurements match those listed above.
    • Measure your pivot point height (use the upper pivot point). See link below for instructions on how to measure.
    • The hinges show a pivot point range because they hinges are adjustable up and down.
    • The best choice for you will be a hinge where your pivot point falls in the middle of one of the pivot point ranges.

About the Screw Hole Pattern

    • These hinges use the Blum Screw hole pattern.
    • For medicine cabinets with metal cabinets, you want to make sure that your screw hole pattern matches the screw hole pattern of these hinges.
    • For medicine cabinets with wood cabinets, it is possible to fill and re-drill the screw holes.
    • Click on the link below to see a diagram of the Blum Screw Hole pattern.

Click here for Information & Pricing

35 mm Medicine Cabinet Hinge

35 mm Medicine Cabinet Hinge
  • Replacement hinge and mounting plate system for Medicine Cabinets.
  • Hinge cup fits into a 35mm diameter hole (1-3/8").
  • Sold by the set; a set includes one hinge, one mounting plate and 4 tapered screws for wood or metal.
  • Most medicine cabinet doors will require that you order 2 sets to replace the hinges.
  • When replacing hinges on a medicine cabinet it is necessary to replace all of the hinges and mounting plate on any door that you are working on. Mixing different brands of hinges can cause binding problems because they may have slightly differing articulations.
  • The screwhole center-to-center dimension for the hinge screws is 45mm (approximately 1-3/4").
  • The screwhole center-to-center dimension for the mounting plate is 32mm (approximately 1-1/4).
  • The mounting plate snaps on the the hinge and can be removed from the hinge by pressing on a small lever.
  • The hinges are adjustable after installation (in and out, up and down, and side to side) by means of 3 cam screws.
  • Made from steel and nickel plated. Opening angle is 110 degrees.

How to size your hinge system

    • Make sure your existing hinge fits into a 35mm diameter hole or cup.
    • Make sure your screwhole center-to-center measurements match those listed above.
    • Measure your pivot point height (upper pivot point). See link below for instructions on how to measure.
    • The hinges show a "pivot point range" because they are adjustable up and down.
    • The best choice will be a hinge where your pivot point height falls in the middle of one of the pivot point ranges shown.

About the Screw Hole Pattern

    • These hinges use the Blum Screw hole pattern.
    • For medicine cabinets with metal cabinets, you want to make sure that your screw hole pattern matches the screw hole pattern of these hinges.
    • For medicine cabinets with wood cabinets, it is possible to fill and re-drill the screw holes.
    • Click on the link below to see a diagram of the Blum Screw Hole pattern.
Click here for Information & Pricing

40 mm Medicine Cabinet Hinge

40 mm Medicine Cabinet Hinge
  • Replacement hinge and mounting plate system for Medicine Cabinets.
  • Hinge cup fits into a 40mm diameter hole (approximately 1-9/16").
  • The screwhole center-to-center dimension for the hinge screws is 52mm (approximately 2-1/16").
  • The screwhole center-to-center dimension for the mounting plate is 32mm (approximately 1-1/4).
  • The mounting plate snaps on the the hinge and can be removed from the hinge by pressing on a small lever.
  • The hinges are adjustable after installation (in and out, up and down, and side to side) by means of 3 cam screws.
  • Made from steel and nickel plated. Opening angle is 94 degrees.

How to size your hinge system

  • Make sure your existing hinge fits into a 40mm diameter hole or cup.
  • Make sure your screwhole center-to-center measurements match those listed above.
  • Measure your pivot point height (upper pivot point). See link below for instructions on how to measure.
  • The hinges show a "pivot point range" because they are adjustable up and down.
  • The best choice will be a hinge where your pivot point height falls in the middle of one of the pivot point ranges shown.

Important Ordering Information

  • This item is sold by the Set; a set includes one hinge, one mounting plate and 4 tapered screws for wood or metal.
  • You will normally order two Sets per door.
  • When replacing hinges on a medicine cabinet it is necessary to replace all of the hinges and mounting plate on any door that you are working on. Mixing different brands of hinges can cause binding problems because they may have slightly differing articulations.
  • The Type of the hinge (Full Crank or Half Crank) shown in the listing below is not important. Please disregard when ordering.
Click here for Information & Pricing

170 Degree Medicine Cabinet Hinge

170 Degree Medicine Cabinet Hinge
  • Replacement hinge and mounting plate system for Medicine Cabinets which use a 170 degree wide opening hinge.
  • Hinge cup fits into a 35mm (1-3/8") diameter hole in the back of the door.
  • This hinge uses a 45mm (1-3/4") screw hole pattern (this is the dimension between the screw hole centers of the hinge cup).
  • Click on the link below to view a diagram of the screw hole pattern.
  • The screw hole center-to-center of the mounting plate is 32mm (approximately 1-1/4").
  • The hinge is adjustable after installation (in and out, up and down and side to side adjustments).
  • Made from steel and nickel plated.

Important Ordering Information

  • This item is sold by the Set: a set includes one hinge, one mounting plate and 4 tapered screws for wood or metal.
  • You will normally order two Sets per door
  • When replacing hinges on a medicine cabinet it is necessary to replace all of the hinges and mounting plates on any door that you are working on. Mixing different brands of hinges can cause binding problems because the hinges may have slightly differing articulations.
Click here for Information & Pricing

Mepla Tri-View Medicine Cabinet Hinge

Mepla Tri-View Medicine Cabinet Hinge
  • Mepla hinge and mounting plate for medicine cabinets and mirror cabinets with wooden or steel doors.
  • Also known as a Tri-View Mirror Hinge.
  • Hinge is a concealed hinge.
  • Mounts at the top and bottom part of the door.
  • Self-locking, no cabinet catch is necessary.
  • Opens to 90 degrees.
  • Non-handed, installs on either a right hand or left hand door.
  • Two models available, one for wood doors, one for metal doors.
  • IMPORTANT FASTENER INFORMATION:
    • Each hinge and mounting plate combination requires 3 screws
      • One 4mm connecting screw which is included when you order the 207135 mounting plate. Screw connects mounting plate to hinge.
      • One #4 pan head screw to mount the nylon cup to the door (not included but offered for purchase during checkout when you purchase either the wood door hinge or the metal door hinge).
      • One #6 flat head screw to mount the mounting plate to the side panel (not included but offered for purchase during checkout when you purchase the mounting plate).
    • PLEASE NOTE: the #4 pan head screw and the #6 flat head screws are not included and must be ordered during checkout.
Click here for Information & Pricing

Hettich Markant Hinge

Hettich Markant Hinge
  • Hettich hinge, Markant 7.1 for overlay installations.
  • For installation of overlay doors on medicine cabinets.
  • Installation requires two hinges (a right hand and a left hand hinge- one for the top of the door and one for the bottom) and two mounting plates. Doors can be removed from the cabinet after installation by loosening the screw on the mounting plate.
  • After installation both the depth and the height of the hinge may be adjusted plus or minus 2 mm.
  • Made from steel base material and nickel plated.
  • The hinges fit into a 35mm (1-3/8") cup drilled into the back of the door.
  • Hinge in the photo shows the "Left Hand" hinge (SKU 306200)
  • PLEASE NOTE: To hinge 1 door you need to order 4 items:
    • one Right Hand Hinge (SKU 306202)
    • one Left Hand Hinge (SKU 306200) and
    • two mounting plates (SKU 306205)
  • Fasteners
    • Each hinge requires 2 each #6 flat head wood screws, not included but offered for purchase during checkout. Order 2 each SKU 652360.
    • Each mounting plate comes with 2 system screws. System screws fit into 5 mm holes that are usually pre-drilled in the cabinet and spaced 32 mm apart. If you are not using the system screws you should order #10 pan head screws (2 for each mounting plate).
  • PLEASE NOTE: Most of our products are not packaged for retail sale and as such do not contain instructions. We recommend that, if you are placing an order for this product, you print out the installation information found at the link below.
Click here for Information & Pricing
accredited business BBB
see what customers are saying

Over 10,000 Reviews
5 Star Average

quick searchabilitiy to find product, easy to order and pay, delivery prompt see summary review ...
Very reliable vendor - would do business with again. Very prompt shipping and the order was processed flawlessly! ...
Guaranteed: All Valid Reviews Posted
StatisticsReview of HardwareSource.com

Related Products