• Blum Compact 38N one piece steel hinge. Mounting plate and hinge are combined in one unit.
• For face frame cabinets.
• Opening angle is 105 degrees.
• Hinge installs in a 35mm (1-3/8") diameter cup drilled in the back of the door.
• This hinge features a shallow cup depth (7/16"). This is useful for doors with a deep profile cut on the outside edge of the door.
• Bore distanceis 1/8". The bore distance is the distance between the edge of the door and the edge of the 35mm cup drilled in the back of the door. This dimension is a standard dimension for all compact European hinges.
• Hinge is self-closing.
• Available in 4 different overlays. If you are replacing hinges, your present overlay will be stamped on the old hinge.
• If you need to determine the overlay dimension of your door, click on the link below for measurement instructions.
• The hinge side comes with screws and press-in dowels. If your installation does not use "press in" dowels you can remove the dowels and use the wood screws provided.
• The mounting plate side does not come with screws. Order one #10 pan head screw for each hinge ordered. Screws are offered for purchase during checkout.
• The hinge is adjustable after installation. Plus or minus 1/8" in height. Plus or minus 1/16" side to side. Plus 3/32" and minus 1/32" depth.
• For 3/4" face frame thicknesses.

If you would like cabinet doors that have a "soft closing" action to them, add our "Blumotion Soft Close Device for Compact Hinges" to your cabinet (SKU 268232). It is offered for purchase during checkout.

Finishes:

• Nickel plated

• Blum Compact 39C one piece steel hinge. Mounting plate and hinge are combined in one unit.
• For face frame cabinets.
• Opening angle is 110 degrees.
• Hinge installs in a 35mm (1-3/8")diameter cup drilled in the back of the door. Cup depth is 1/2".
• Bore distance is 1/8". The bore distance is the distance between the edge of the door and the edge of the 35mm cup drilled in the back of the door. This dimension is a standard dimension for all compact European hinges.
• Hinge is self-closing.
• Available in 4 different overlays. If you are replacing hinges, your present overlay should be stamped on the old hinge.
• If you need to determine the overlay dimension of your door, click on the link below for measurement instructions.
• The hinge side comes with screws and press-in dowels. If your installation does not use "press in" dowels you can remove the dowels and use the wood screws provided.
• The mounting plate side does not come with screws. Order one #10 pan head screw for each hinge ordered. Screws are offered for purchase during checkout.
• The hinge is adjustable after installation. Plus or minus 1/8" in height. Plus or minus 1/16" side to side. Plus 3/32" and minus 1/32" depth.
• For 3/4" face frame thicknesses.

If you would like cabinet doors that have a "soft closing" action to them, add our "Blumotion Soft Close Device for Compact Hinges" to your cabinet (SKU 268232). It is offered for purchase during checkout.

Finish:

• Nickel plated

• Generic European style compact one piece hinge. Mounting plate and hinge are combined in one unit.
• Opening angle is 105 degrees. Hinge is self closing.
• For face frame cabinets with overlay doors. Three overlay dimensions are offered: 7/16", 1/2" and 3/4".
• Hinge is made for cabinets with a 3/4" thick face frame.
• Cup diameter is 1-3/8". Cup depth is 7/16". Bore distance is 1/8". Hinges feature 3-way adjustability.
• The hinge side comes with screws and press-in dowels. Dowels are typically used in MDF or particle board material. If mounting in solid wood, remove the dowels and use the included wood screws.
• Screws are not included for the face frame attachment. Each hinge uses one #7 screw to attach to the face frame. Screws are offered for purchase during checkout.

Finishes:

• Nickel Plated

• Generic European style compact one piece hinge. Mounting plate and hinge are combined in one unit.
• Opening angle is 105 degrees. Hinge is self closing.
• For face frame cabinets which have overlay doors. Three different overlay hinges are offered; 1-1/4" overlay, 1-3/8" overlay and 1-1/2" overlay.
• Hinge is made for cabinets with a 3/4" thick face frame.
• Cup diameter is 1-3/8". Cup depth is 7/16". Bore distance is 1/8". Hinges feature 3-way adjustability.
• The hinge side comes with screws and press-in dowels. Dowels are typically used in MDF or particle board material. If mounting in solid wood, remove the dowels and use the included wood screws.
• Screws are not included for the face frame attachment. Each hinge uses one #7 screw to attach to the face frame. Screws are offered for purchase during checkout.

Finishes:

• Nickel Plated

• This brand new product from Blum is presently only available in a limited number of overlays. We will be adding more as they become available (most likely mid 2012).
• Compact One Piece European hinge with built-in Blumotion (one piece means that the mounting plate and the hinge are combined into one unit).
• Blumotion is Blum's soft closing mechanism, which allows the cabinet door to close softly without banging.
• This hinge may be used to replace any compact one piece European hinge that is installed with the following:
  • the same overlay dimension
  • a bore distance of 1/8" (the bore distance is the distance between the edge of the door and the edge of the cup drilled in the back of the door)
  • a cup diameter of 35mm (1-3/8")
  • a cup depth of 7/16" or greater
• This hinge features:
  • an overload safety feature (protects the soft close mechanism if the door is slammed)
  • deactivation switch (for small or light doors, one of the hinges may be deactivated for less dampening action)
• Available in two cup depths, shallow and standard. The shallow cup depthis useful for doors with a deep profile cut on the outside edge of the door.
• Hinge is 6-way adjustable after installation.
• An optional restriction clip is available for this item. The restriction clip (our SKU 268765) stops the door from opening wider than 86 degrees. This is valuable if the fully open door hits another cabinet, glass door, TV screen, etc. The restriction clip is offered for purchase during checkout.
• Hinge comes with dowels and screws for the door side of the hinge. Dowels may be discarded if not needed.
• Screws for the cabinet side are not included but are offered for purchase during check out. Order one #10 pan head screw for each hinge ordered.

• Compact European style hinge for face frame cabinets.
• The hinge and mounting plate on these hinges are permanently connected.
• Installs in a 35mm (1-3/8") hole drilled in the back of the cabinet door. The mounting plate installs on the edge of the face frame.
• Available in two overlays; 1/2" and 3/4". Use a 1/8" Bore Distance (distance from the edge of the door to the edge of the 35mm cup drilled in the back of the door).
• Hinge is 6-way Cam-adjustable.
• 2 screws and 2 dowels are provided for the hinge side.
• Screws are not included for the mounting plate (Uses #7 pan head screws, offered for purchase during checkout).

Finishes:

• Nickel Plated

• Compact European style hinge for face frame cabinets.
• The hinge and mounting plate on these hinges are permanently connected.
• Hinge installs in a 35mm (1-3/8") diameter hole drilled in the back of the cabinet door. The mounting plate installs on the edge of the face frame.
• Made for doors with a 1/2" overlay.
• Hinge opens to 125 degrees.
• Uses an 1/8" bore distance. The bore distance is the distance from the edge of the door to the edge of the 35mm hole drilled in the back of the door. This is a standard measurement for European Compact Hinges.
• Features height adjustment, vertical adjustment and horizontal adjustment using screw or cam adjusters.
• 2 screws and 2 dowels are provided for the hinge side.
• Screws are not included for the mounting plate. Uses #6 pan head metal screws, stainless steel is the best match for the finish. Screws are offered for purchase during checkout.