• Soft closing device for Blum hinges.
• When used with Blum hinges this device allows for a smooth, silent close, no matter how hard you shut the door.
• When you close your cabinet door, the device senses how hard the door is being closed and then adjusts resistance to keep it from slamming shut.
• Can be installed by itself in the non-hinged side panel by drilling a 10mm hole.
• It can be surface mounted using a single holder on the inside non-hinged edge of a side panel.
• For a double door cabinet, it can be installed (using the double holder)on the underside of a shelf.
• Screws are not included but are offered for purchase during checkout. The holders use two #6screws each. The soft close device does not use screws to install.
• PLEASE NOTE: These items are sold as separate components (a separate metal holder and a separate soft close unit). Make sure to order one of each so that you get a complete working unit.

Finishes:

• Nickel

• The Blumotion "soft close" device allows cabinet doors to close without slamming. The braking system inside the Blumotion device creates a perfect closing motion.
• Blumotion technology automatically adapts to each doors size, weight and closing speed.
• This soft close device easily clips on to new or existing "Straight Arm" hinges made by Blum. Click on link below for a list Blum hinges that work with this device.
• This device works with our SKU 652298 (Blum #71T555), our SKU 652366 (Blum #71T958) and our SKU 652020 (Blum #75T1550).
• Not recommended for 170 degree hinges.

Finishes:

• Nickel

• The Blumotion "soft close" device allows cabinet doors to close without slamming. The braking system inside the Blumotion device creates a perfect closing motion.
• Blumotion technology automatically adapts to each doors size, weight and closing speed.
• This soft close device easily clips on to new or existing "Half Cranked" hinges made by Blum. Click on link below for a list Blum hinges that work with this device.
• This device works with our SKU 652364, our SKU 652308 and our SKU 652021.
• Not recommended for 170 degree hinges.

Finishes:

• Nickel

• The Blumotion "soft close" device allows cabinet doors to close without slamming. The braking system inside the Blumotion device creates a perfect closing motion.
• Blumotion technology automatically adapts to each doors size, weight and closing speed.
• This soft close device easily clips on to new or existing "Full Cranked" hinges made by Blum.
• This device works with our SKU 652022 and 652362
• It also works with the Blum Clip 100 degree hinge which we do not currently stock.

Finishes:

• Nickel

• The Blumotion "soft close" device allows cabinet doors to close without slamming. The braking system inside the Blumotion device creates a perfect closing motion.
• Blumotion technology automatically adapts to each doors size, weight and closing speed.
• This soft close device easily clips on to new or existing 155 degree hinges made by Blum.
• Works for both straight arm and half cranked Clip Top hinges by Blum.
• This device works with our SKU 268770.
• This item will not work with Blum's 155 Zero Protrusion Hinge (our SKU 268601)

• The Blumotion "soft close" device allows cabinet doors to close without slamming. The braking system inside the Blumotion device creates a perfect closing motion.
• "Blumotion for Compact Hinges" works on face frame cabinets. It is designed for use with Blum Compact hinges only.
• Installs anywhere on the hinge side of the cabinet.
• Product is adjustable after installation plus or minus 5mm.
• Included with this product are the blumotion device, a spacer for overlays of less than 1", instructions and fastening wood screws.

Finishes:

• Nickel

• This brand new product from Blum is presently only available in a limited number of overlays. We will be adding more as they become available (most likely mid 2012).
• Compact One Piece European hinge with built-in Blumotion (one piece means that the mounting plate and the hinge are combined into one unit).
• Blumotion is Blum's soft closing mechanism, which allows the cabinet door to close softly without banging.
• This hinge may be used to replace any compact one piece European hinge that is installed with the following:
  • the same overlay dimension
  • a bore distance of 1/8" (the bore distance is the distance between the edge of the door and the edge of the cup drilled in the back of the door)
  • a cup diameter of 35mm (1-3/8")
  • a cup depth of 7/16" or greater
• This hinge features:
  • an overload safety feature (protects the soft close mechanism if the door is slammed)
  • deactivation switch (for small or light doors, one of the hinges may be deactivated for less dampening action)
• Available in two cup depths, shallow and standard. The shallow cup depth is useful for doors with a deep profile cut on the outside edge of the door.
• Hinge is 6-way adjustable after installation.
• An optional restriction clip is available for this item. The restriction clip (our SKU 268765) stops the door from opening wider than 86 degrees. This is valuable if the fully open door hits another cabinet, glass door, TV screen, etc. The restriction clip is offered for purchase during checkout.
• Hinge comes with dowels and screws for the door side of the hinge. Dowels may be discarded if not needed.
• Screws for the cabinet side are not included but are offered for purchase during check out. Order one #10 pan head screw for each hinge ordered.

• Blum's straight arm "Clip top" hinge for face frame overlay cabinets featuring built-in Blumotion.
• Hinge cup drilled in the back of the door is 35mm (1-3/8") in diameter. Door opening angle is 110 degrees.
• Blumotion is Blum's soft close feature, silent and effortless door closing action, now integrated into the hinge cup.
• This hinge may be used to retrofit existing cabinets which use Blum's clip top mounting plates. No need to buy new mounting plates. Simply unsnap your existing Blum hinges from their mounting plates, replace the hinges using the existing screws and snap the hinges back onto the mounting plates (see advisory below).
• Hinge also features a deactivation switch. Blumotion feature may be turned off for small or light doors (turn off Blumotion on one of the two hinges on the door).
• ADVISORY: This hinge requires that the cup drilled in the back of your door is at least 13mm (1/2" deep). Prior Blum Clip top hinges required a 12.5mm cup depth. We recommend that you measure the cup depth on your doors before ordering. Many cabinet makers used a 13mm cup depth even though the requirement was only 12.5mm so yours may actually already be drilled to 13mm. If your cup depth measures only 12.5, we have a hinge cup spacer plate which you can install under the hinge cup to make up for the 0.5 mm difference. The hinge cup spacer plate is offered for purchase during checkout.
• PLEASE NOTE: European hinges are a two-part hinge made up of the hinge and a mounting plate (sold separately). If you need to order mounting plates, consult the overlay table at the link below. There are three possible mounting plates for face frame overlay cabinets (each plate is a different heightand in combination with the bore distance determinesthe overlay of the door). Mounting Plates are offered for purchase during checkout. The face frame mounting plates are our SKU numbers 652304, 652305, or 652306.
• Each hinge uses two each #6 flat head screws (not included but offered for purchase during checkout).
• Hinge is made from steel and nickel plated.
  • ACCESSORIES (Accessories are offered for purchase during checkout)
    • Restriction clip: limits opening angle of hinge to 86 degrees. (SKU 701113).
    • Hinge cup spacer plate: takes up gap if your hinge cup is drilled to 12.5mm (SKU 701112).
    • Hinge cover plate: snap on plate that covers adjustment screws (SKU 268001)
    • Face Frame Mounting Plates: SKU numbers 652304, 652305 and 652306.
    • #6 Flat Head Hinge Screws: available by the each (SKU 652360) or by the 50 Pack (SKU 652361).

• Blum's straight arm "Clip top" hinge for frameless overlay cabinets (also known as Panel Cabinets) featuring built-in Blumotion.
• Hinge cup drilled in the back of the door is 35mm (1-3/8") in diameter. Door opening angle is 110 degrees.
• Blumotion is Blum's soft close feature, silent and effortless door closing action, now integrated into the hinge cup.
• This hinge may be used to retrofit existing cabinets which use Blum's clip top mounting plates. No need to buy new mounting plates. Simply unsnap your existing Blum hinges from their mounting plates, replace the hinges using the existing screws and snap the hinges back onto the mounting plates (see advisory below).
• Hinge also features a deactivation switch. Blumotion feature may be turned off for small or light doors (turn off Blumotion on one of the two hinges on the door).
• ADVISORY: This hinge requires that the cup drilled in the back of your door is at least 13mm (1/2" deep). Prior Blum Clip top hinges required a 12.5mm cup depth. We recommend that you measure the cup depth on your doors before ordering. Many cabinet makers used a 13mm cup depth even though the requirement was only 12.5mm so yours may actually already be drilled to 13mm. If your cup depth measures only 12.5, we have a hinge cup spacer plate which you can install under the hinge cup to make up for the 0.5 mm difference. The hinge cup spacer plate is offered for purchase during checkout.
• PLEASE NOTE: European hinges are a two-part hinge made up of the hinge and a mounting plate (sold separately). If you need to order mounting plates, consult the overlay table at the link below. There are four possible mounting plates for frameless (panel cabinet) overlay cabinets (each plate is a different height and in combination with the bore distance determines the overlay of the door). Mounting Plates are offered for purchase during checkout. The frameless mounting plates are our SKU numbers 652296, 652301, 652303 or 652302.
• Each hinge uses two each #6 flat head screws (not included but offered for purchase during checkout).
• Hinge is made from steel and nickel plated.
• ACCESSORIES (Accessories are offered for purchase during checkout)
  • Restriction clip: limits opening angle of hinge to 86 degrees. (SKU 701113).
  • Hinge cup spacer plate: takes up gap if your hinge cup is drilled to 12.5mm (SKU 701112).
  • Hinge cover plate: snap on plate that covers adjustment screws (SKU 268001)
  • FramelessMounting Plates: SKU numbers 652296, 652301, 652303 and 652302.
  • #6 Flat Head Hinge Screws: available by the each (SKU 652360) or by the 50 Pack (SKU 652361).

• Blum's full cranked"Clip top" hinge for frameless inset cabinets featuring built-in Blumotion.
• Hinge cup drilled in the back of the door is 35mm (1-3/8") in diameter. Door opening angle is 110 degrees.
• Blumotion is Blum's soft close feature, silent and effortless door closing action, now integrated into the hinge cup.
• This hinge may be used to retrofit existing cabinets which use Blum's clip top mounting plates. No need to buy new mounting plates. Simply unsnap your existing Blum hinges from their mounting plates, replace the hinges using the existing screws and snap the hinges back onto the mounting plates (see advisory below).
• Hinge also features a deactivation switch. Blumotion feature may be turned off for small or light doors (turn off Blumotion on one of the two hinges on the door).
• ADVISORY: This hinge requires that the cup drilled in the back of your door is at least 13mm (1/2" deep). Prior Blum Clip top hinges required a 12.5mm cup depth. We recommend that you measure the cup depth on your doors before ordering. Many cabinet makers used a 13mm cup depth even though the requirement was only 12.5mm so yours may actually already be drilled to 13mm. If your cup depth measures only 12.5, we have a hinge cup spacer plate which you can install under the hinge cup to make up for the 0.5 mm difference. The hinge cup spacer plate is offered for purchase during checkout.
• PLEASE NOTE: European hinges are a two-part hinge made up of the hinge and a mounting plate (sold separately). If you need to order mounting plates, the correct mounting plate for this hinge when installed on a frameless cabinet with an inset door is our SKU 652296.
• Each hinge uses two each #6 flat head screws (not included but offered for purchase during checkout).
• Hinge is made from steel and nickel plated.
• ACCESSORIES (Accessories are offered for purchase during checkout)
  • Restriction clip: limits opening angle of hinge to 86 degrees. (SKU 701113).
  • Hinge cup spacer plate: takes up gap if your hinge cup is drilled to 12.5mm (SKU 701112).
  • Hinge cover plate: snap on plate that covers adjustment screws (SKU 268002)
  • Face Frame Mounting Plate: SKU numbers 652296.
  • #6 Flat Head Hinge Screws: available by the each (SKU 652360) or by the 50 Pack (SKU 652361).

• Blum's half cranked "Clip top" hinge for face frame inset cabinets featuring built-in Blumotion.
• Hinge cup drilled in the back of the door is 35mm (1-3/8") in diameter. Door opening angle is 110 degrees.
• Blumotion is Blum's soft close feature, silent and effortless door closing action, now integrated into the hinge cup.
• This hinge may be used to retrofit existing cabinets which use Blum's Face Frame Adapter Mounting Plate. No need to buy new mounting plates. Simply unsnap your existing Blum hinges from their mounting plates, replace the hinges using the existing screws and snap the hinges back onto the mounting plates (see advisory below).
• Hinge also features a deactivation switch. Blumotion feature may be turned off for small or light doors (turn off Blumotion on one of the two hinges on the door).
• ADVISORY: This hinge requires that the cup drilled in the back of your door is at least 13mm (1/2" deep). Prior Blum Clip top hinges required a 12.5mm cup depth. We recommend that you measure the cup depth on your doors before ordering. Many cabinet makers used a 13mm cup depth even though the requirement was only 12.5mm so yours may actually already be drilled to 13mm. If your cup depth measures only 12.5, we have a hinge cup spacer plate which you can install under the hinge cup to make up for the 0.5 mm difference. The hinge cup spacer plate is offered for purchase during checkout.
• PLEASE NOTE: European hinges are a two-part hinge made up of the hinge and a mounting plate (sold separately and available for purchase below). If you need to order mounting plates, the correct mounting plate for this hinge when installed on a face frame cabinet with an inset door is our Face Frame Adapter Mounting Plate SKU 268225.
• Each hinge uses two each #6 flat head screws (not included but offered for purchase during checkout).
• Hinge is made from steel and nickel plated.
• ACCESSORIES (Accessories are offered for purchase during checkout)
  • Restriction clip: limits opening angle of hinge to 86 degrees. (SKU 701113).
  • Hinge cup spacer plate: takes up gap if your hinge cup is drilled to 12.5mm (SKU 701112).
  • Hinge cover plate: snap on plate that covers adjustment screws (SKU 268002)
  • #6 Flat Head Hinge Screws: available by the each (SKU 652360) or by the 50 Pack (SKU 652361).
  • Platemate: The Face Frame Adapter Mounting Plate requires that you drill the screw holes at a special angle. The platemate is a jig that aids in drilling these holes to the proper angle. (SKU 268227). It is possible to drill these holes without the Platemate. The Platemate is offered for purchase when the Face Frame Adapter Mounting Plate is purchased.

• Blum's half cranked "Clip top" hinge for "Twin Overlay" doors (also known as "Back-to-Back" Doors) featuring built-in Blumotion. Twin Overlay Doors are doors that are hinged to the same side panel on a frameless cabinet.
• Hinge cup drilled in the back of the door is 35mm (1-3/8") in diameter. Door opening angle is 110 degrees.
• Blumotion is Blum's soft close feature, silent and effortless door closing action, now integrated into the hinge cup.
• This hinge may be used to retrofit existing cabinets which use Blum's clip top mounting plates. No need to buy new mounting plates. Simply unsnap your existing Blum hinges from their mounting plates, replace the hinges using the existing screws and snap the hinges back onto the mounting plates (see advisory below).
• Hinge also features a deactivation switch. Blumotion feature may be turned off for small or light doors (turn off Blumotion on one of the two hinges on the door).
• ADVISORY: This hinge requires that the cup drilled in the back of your door is at least 13mm (1/2" deep). Prior Blum Clip top hinges required a 12.5mm cup depth. We recommend that you measure the cup depth on your doors before ordering. Many cabinet makers used a 13mm cup depth even though the requirement was only 12.5mm so yours may actually already be drilled to 13mm. If your cup depth measures only 12.5 mm, we have a hinge cup spacer plate which you can install under the hinge cup to make up for the 0.5 mm difference. The hinge cup spacer plate is offered for purchase during checkout.
• PLEASE NOTE: European hinges are a two-part hinge made up of the hinge and a mounting plate (sold separately). This hinge on a "Twin Ovelay" installation uses Blums frameless mounting plate with a 0mm height (our SKU 652296). For more information about this please consult the reveal table at the information link below.
• Each hinge uses two each #6 flat head screws (not included but offered for purchase during checkout).
• Hinge is made from steel and nickel plated.
• ACCESSORIES (Accessories are offered for purchase during checkout)
  • Restriction clip: limits opening angle of hinge to 86 degrees. (SKU 701113).
  • Hinge cup spacer plate: takes up gap if your hinge cup is drilled to 12.5mm (SKU 701112).
  • Hinge cover plate: snap on plate that covers adjustment screws (SKU 268001)
  • Frameless Mounting Plates: SKU number 652296
  • #6 Flat Head Hinge Screws: available by the each (SKU 652360) or by the 50 Pack (SKU 652361).

• Spacer plate for Blum's Blumotion hinges.
• Blum's new Blumotion hinges require a cup depth of 13mm for the 35mm hole drilled in the back of the door.
• Blum's non-Blumotion hinge require a cup depth of 12.5mm.
• This Hinge cup spacer plate makes up the difference.
• Made from dark gray plastic.
• PLEASE NOTE: this space plate is actually 1.5mm thick and will make up a difference of up to 1.5mm.

• Restriction Clip for use on Blums Clip Top Blumotion Hinges (Blums hinges with built-in Blumotion)
• Restriction clip may be installed either before or after the hinge has been installed.
• Restriction clip keeps door from opening more than 86 degrees.
• This is valuable for cabinet door installations which may open too wide and interfere with or hit other cabinets, tv screens, glass doors, etc.
• Clip may be installed or removed either before or after the hinge has been installed in the door.
• For use only on Blums hinges with built-in Blumotion (our SKU numbers 701120, 701122 and 701124).
• For installation instructions click on link below.

• Restriction clip for Blum's Compact Hinges with Built-in Blumotion.
• Restriction clip keeps the door from opening more than 86 degrees.
• This is a valuable option for cabinet door installations which may open too wide and interfere with or hit other cabinets, tv screens, glass doors, etc.
• For use only on Blums Compact Hinges with Built-in Blumotion. Will not work with other Blum hinges or other brands of hinges.
• This clip works with our SKU numbers 268760 and 268762.
• PLEASE NOTE:
  • Click on link below for installation instructions.
  • Written instructions are not included with item so it is advisable to print a copy before purchasing.
  • Install the restriction clip before the hinge has been installed in the door.
  • Or remove the hinge from the door before installing if the hinge has been previously installed.