• For overlay doors on "frameless" or "face frame" cabinets.
• This "Straight Arm" type hinge features a 120 degree opening angle.
• Hinges fit into a 35mm (1-3/8") cup drilled in the back of the door.
• Hinges are self-closing. Self closing means they do not require a cabinet catch to hold door against cabinet.
• When replacing worn out or broken Blum hinges it is a good idea to replace all the hinges on your door at the same time.
• Use one of our "Clip Top" mounting plates with this hinge (sold separately and offered for purchase during checkout).
• Each hinge uses 2 each #6 flat head screws (not included but offered for purchase during checkout).
• PLEASE NOTE: European hinges are a two part hinge (the hinge and a mounting plate). Make sure to order at least two hinges and two mounting plates for each door you are hanging. Mounting plates are offered for purchase during checkout.
• Click on the link below for installation information and mounting plate choice.

If you would like cabinet doors that have a "soft closing" action to them, add our Blumotion soft close device to this hinge (SKU 268230). It is offered for purchase during checkout.

Finishes:

• Nickel plated

• For full inset or back-to-back (twin overlay) doors on "frameless" cabinets.
• Hinge features 120 degree opening angle.
• Hinges fit into a 35mm (1-3/8") cup drilled in the back of the door.
• Self-closing hinge. Self-closing means that the hinge will hold the door against the cabinet in the closed position so that it does not require a cabinet catch.
• This is a "half-cranked" style hinge.
• When replacing worn out or broken Blum hinges it is a good idea to replace all the hinges on your door at the same time.
• Use one of our "Clip Top" mounting plates with this hinge (sold separately and offered for purchase during checkout).
• For installation information and mounting plate choices click on the link below
• Screws for this item are not included. To order screws, order our SKU #652360. Screws are offered for purchase during checkout.

If you would like cabinet doors that have a "soft closing" action to them, add our Blumotion soft close device to this hinge (SKU 268233). It is offered for purchase during checkout.

Finishes:

• Nickel plated

• For overlay doors on "frameless" or "face frame" cabinets.
• Features 170 degree opening angle.
• Hinges fit into a 35mm (1-3/8") cup drilled in the back of the door.
• Hinge is self closing and mounts with screws (sold separately and offered for purchase during checkout, SKU #652360).
• When replacing worn out or broken Blum hinges it is a good idea to replace all the hinges on your door at the same time.
• Use one of our "Clip Top" mounting plates with this hinge (sold separately and offered for purchase during checkout).
• This hinge is the "straight arm" style.
• An option that is available for this product is a 130 Degree Restriction Clip (our SKU 652033). This clip easily installs on the arm of the hinge andreduces the maximum opening angle of the hinge to 130 degrees. This is a valuable option for a door that opens too wide and is hitting something at the end of its swing path. This restriction clip is offered for purchase during checkout.
• For installation information and mounting plate selection click on link below.

Finishes:

• Nickel plated

• Hinge allows door to open 170 degrees.
• Self-closing type hinge. Mounts with screws(sold separately and offered for purchase during checkout, order our SKU# 652360).
• Hinges fit into a 35mm (1-3/8") cup drilled in the back of the door.
• This hinge is the "half-cranked" style for twin overlay (also known as back-to-back doors)on frameless cabinets and inset doors on frameless cabinets.
• Use one of our "Clip Top" mounting plates with this hinge (sold separately and offered for purchase during checkout).
• For installation information and mounting plate selection click on link below.
• An option that is available for this product is a 130 Degree Restriction Clip (our SKU 652033). This clip easily installs on the arm of the hinge andreduces the maximum opening angle of the hinge to 130 degrees. This is a valuable option for a door that opens too wide and is hitting something at the end of its swing path. This restriction clip is offered for purchase during checkout.
• For hinge definitions see our "Hinge Glossary" in the HINGE INFORMATION section.

Finishes:

• Nickel plated

• Blum 107 Degree Clip Top Hinges allow door to open to 107 degrees.
• This hinge has a restriction clip option (sold separately) which restricts the opening of the door to 86 degrees.
• Available in 3 styles
  • Straight Arm
  • Half Cranked
  • Full Crank
• For Face Frame and Frameless Cabinets.
• For Overlay, Inset and Twin Overlay Doors.

• Blum clip top hinge solution for 3/8" partial inset cabinets.
• For frameless cabinets.
• For face frame cabinets, you will need to "block out" the face frame by installing a 3" tall piece of wood behind the face frame (on the inside of the cabinet). This wood block is not included and must be made by the installer. Wood block needs to be sized so that it is flush with the edge of the face frame.
• Hinge is a 1/2 crank 155 degree opening hinge. Cup size is 35mm. Hinge is self-closing.
• Installation information:
  • Bore distance 11mm. The bore distance is the distance from the edge of the door to the edge of the 35mm cup drilled in the back of the door.
  • Mounting plate (must be ordered separately) is our SKU 652301. It is offered for purchase during checkout.
  • Mounting plate screw holes are located 46mm from the edge of the cabinet side panel.
  • Screws: Each hinge and mounting plate uses 4 each #6 flat head wood screws (not included but offered for purchase during checkout).
• Optional Items
  • Restriction clip: an optional clip is available if you need to restrict the opening angle of the hinge to 110 degrees. It is our SKU 268772 and is offered for purchase during checkout.
  • Soft close: If you would like the door to close softly without slamming Blumotion is available for this hinge. Order our SKU 268771 (one per hinge). This item is offered for purchase during checkout.
• PLEASE NOTE: European hinges are a two part hinge (hinge and mounting plate). The mounting plate (SKU 652301)is not included and must be ordered separately. Screws are not included and must be ordered separately.

• Mounting plates made for Blum hinges and for face frame cabinets.
• These plates mount on the cabinet on the EDGE OF THE FACE FRAME.
• When replacing worn out or broken Blum hinges it is a good idea to replace all the hinges and mounting plates on your door at the same time.
• Use one of the Blum "Clip Top" hinges with this mounting plate.
• Mounts with #7 screws (sold separately, order our SKU# 268000). Screws are offered for purchase during checkout.
• PLEASE NOTE: for years, cabinet makers have incorrectly installed these mounting plates with #6 screws instead of the correct #7 screw. This causes the plates to eventually crack. Please use #7 screws when installing these plates.

Finishes:

• Nickel Plated

• Mounts on the INSIDE WALL OF THE CABINET (not on the face frame).
• When replacing worn out or broken Blum hinges it is a good idea to replace all the hinges and mounting plates on your door at the same time.
• Use one of the "Clip Top" hinges with this mounting plate.
• Mounts with screws (sold separately, order our SKU# 652360).
• Mounting plates are sized by height. Each mounting plate in combination with the bore distance of the hinge creates the door overlay (for an overlay door) or the reveal (for an inset door or a back-to-back door).
• If you place the mounting plate on a flat surface and you measure from the flat surface to the top of the mounting plate you will get the actual height;
• SKU 652296 measures 8 mm or 5/16"(Blum calls this plate 0 mm).
• SKU 652301 measures 11 mm or 7/16"(Blum calls this plate 3 mm).
• SKU 652303 measures 14 mm or 9/16" (Blum calls this plate 6 mm).
• SKU 652302 measures 17 mm or 11/16" (Blum calls this plate 9 mm).
• For more information on these mounting plates see our web page that contains the Blum hinge you intend to use.

Finishes:

• Nickel Plated

• Blum cover caps are designed to cover up the screws on Blum hinges.
• Gives Blum European hinges a more elegant, finished look.
• Cover caps install by snapping into the square hole on Blum hinges.
• Cover caps fit specific Blum models, please check the list below carefully before ordering.
• Made from nickel plated steel.
• SKU 268001 fits the following Blum hinges
  • Blum Straight Arm Hinges (100, 107, 120, 120+), Thick Door and bi-fold hinges
  • Our SKU numbers 652298, 652366, 268174
  • Blum Diagonal 45 and Blind Corner Hinges
  • Our SKU numbers 268612, 268600, 268610
• SKU 268002 fits the following Blum hinges
  • Blum Cranked Arm Hinges (100, 107, 120, 120+), Thick Door and bi-fold hinges
  • Our SKU numbers 652308, 652364, 652362
• SKU 268003 fits the following Blum hinges
  • Blum 170 Degree Hinges
  • Our SKU numbers 652300, 652299

• Cup cap covers up the screws on your Blum hinge.
• Easily snaps on to any Blum "Clip Top" hinge.
• Made from nickel plated steel.
• Works on the following Blum Clip Top hinges
  • 107 Degree
  • 120 Degree (SKU's 652298, 652308)
  • Thick Door Hinges (SKU's 652366, 652364, 652362)
  • Blind Corner Hinges (SKU's 268600, 268610)
  • Angled Hinges (SKU's 268612)
• Does not work on the following hinges
  • Non-Blum brand hinges
  • Blum 170 degree hinges
  • Blum Compact hinges
  • Blum Pie cut corner hinges
  • Blum Mini hinges
  • Blum Zero Protrusion hinges
  • Blum Glass door hinges
  • Blum Modul hinges
  • Blumotion hinges

• Plastic dowel and dowel screw for European hinge push-in type installations.
• Used on manufactured wood products where wood screws do not hold well.
• Plastic dowel and dowel screw are sold separately.
• Dowel measures 21/64" diameter by 27/64" long (or 8mm by 11mm).
• Dowel screw is a #6 flat head screw and is 1/2" in length.

Finishes:

• Dowel is made of white plastic
• Dowel screw is steel and nickel plated.

• Flat head phillips type screw.
• Specially made for European and Blum hinges.
• Steel base material.
• The #6 screw is for most European hinges and mounting plates.
• The #7 screw is for Blum Face Frame Mounting Plates.
• Sold by the "Each" or by the "Pack". There are 50 screws in a pack.

Finishes:

• Nickel Plated

• This screw is for European hinges used on "Back-to-Back" or "Twin Overlay" doors where the hinges are installed back-to-back on the side panel. The back-to-back installation will cause regular screws to interfere with each other.
• Maximum length of screw is 1-1/16". Mimimum length of screw is 13/16".
• Flat style screw head is a #6.
• Female shaft outside diameter is 3/16".
• Male screw is steel. Female screw is non-ferrous.
• For each screw needed order one male screw (SKU 268250) and one female screw (SKU 268251).

Finishes:

• Nickel Plated

• Restriction clip reduces the opening angle of a Blum 170 degree hinge to 130 degrees.
• This is a valuable option if you have a door that is hitting something because it opens too wide.
• Very simple installation. No tools required. Clip may be installed without removing the hinge from the door.
• Clip may be uninstalled with a fine bladed screwdriver if desired.
• Installation instructions are found below. If you are going to order this clip please print out instructions because no printed instructions are included with purchase.
• Made from black nylon.
• PLEASE NOTE: This product will only work with Blums 170 degree hinges (Our SKU's 652300 and 652299). It does not work with other brands of European hinges or other models of Blum hinges.

• Restriction clip reduces the opening angle of a Blum 155 degree hinge to 110 degrees.
• This is a valuable option if you have a door that is hitting something because it opens too wide.
• Very simple installation. No tools required. Clip may be installed without removing the hinge from the door.
• Clip may be uninstalled with a fine bladed screwdriver if desired.
• Installation instructions are found below. If you are going to order this clip please print out instructions because no printed instructions are included with purchase.
• Made fromgray nylon.
• PLEASE NOTE: This product will only work with Blums 155 degree hinges (Our SKU's 268770). It does not work with other brands of European hinges or other models of Blum hinges.