• Aximat hinges are for 270 degree opening doors.
• Aximat hinge is for cabinets with 3/4" (19mm)thick door and 3/4" (19mm) thick side panel.
• Installs in a 35mm cup drilled in the back of the door.
• Door overlay will be 15mm (19/32").
• Hinge allows door to be free swinging and has an internal snap catch which holds the door in the closed positon.
• Each hinge uses two types of screws. Three each #5 or #6 flat head screws and two "System screws". The screw holes for the "System screws" are located under the black plastic cover shown in the photo. Screws are not included but offered for purchase during checkout.
• PLEASE NOTE: This Aximat hinge has been discontinued by the manufacturer. We have left this on the website for reference. The replacement for this hinge is our "New Style Aximat Hinge, 270 Degree, Full Overlay".

Finishes:

• Nickel
• Black

• This is the "New Style Aximat Hinge for Full Overlay Doors". It replaces the "Old Style Aximat Hinge" which is no longer available.
• European style Aximat hinge for 270 degree opening doors.
• For cabinets with 3/4" (19mm)thick door and 3/4" (19mm) thick side panel.
• Installs in a 35mm cup drilled in the back of the door.
• Door overlay will be 15mm (19/32"), full overlay.
• Hinge allows door to be free swinging and has an internal snap catch which holds the door in the closed positon.
• PLEASE NOTE; a single hinge is made up of two separate parts which snap together to become the hinge that you see in the photo to the left. When ordering make sure to order one "cup side" (SKU 796616) and one "arm side" (SKU 796618) for each hinge you need.
• PLEASE NOTE: Each "arm side" comes with two screws and two plastic dowels which are sized for a 5mm (3/16") hole. The "cup side" of the hinge does not come with screws. Each "cup side" uses 2 each #6 flat head screws which are offered for purchase during checkout.

Finishes:

• Nickel
• Black

• This is the "New Style Aximat Hinge for Half Overlay Doors".
• European style Aximat hinge for 240 degree opening doors.
• For cabinets with 3/4" (19mm) thick door and 3/4" (19mm) thick side panel.
• Installs in a 35mm cup drilled in the back of the door.
• Door overlay will be 12.5mm (1/2"),half overlay.
• Hinge allows door to be free swinging and has an internal snap catch which holds the door in the closed positon.
• PLEASE NOTE; a single hinge is made up of two separate parts which snap together to become the hinge that you see in the photo to the left. When ordering make sure to order one "cup side" (SKU 796616) and one "arm side" (SKU 796617) for each hinge you need.
• PLEASE NOTE: Each "arm side" comes with two screws and two plastic dowels which are sized for a 5mm (3/16") hole. The "cup side" of the hinge does not come with screws. Each "cup side" uses 2 each #6 flat head screws which are offered for purchase during checkout.

Finishes:

• Nickel