Entertainment Center Cabinet Hinges

Entertainment Center Cabinet Hinges

  • Entertainment center or armoire hinges.
  • Hinges allow cabinet doors to open wide enough to view a television monitor.
  • Most entertainment center hinges are also called 270 degree hinges.
  • Pivot door slides can also be found in this section.

270 Degree Hinge with Ball Tips

270 Degree Hinge with Ball Tips
  • Entertainment center hinge for overlay doors.
  • Allows doors to open 270 degrees when installed in the "full overlay" position.
  • Hinge measures 2.5" tall (joint length). Wrap around the back of the door is 1.5". Wrap around the side panel is 3/4".
  • Hinge is made for a 3/4" thick side panel and a 3/4" thick door.
  • Steel base material.
  • Each hinges uses 6 each #6 flat head screws (not included but offered for purchase during checkout).

Finishes:

  • Brass Plated
Click here for Information & Pricing

270 Degree Overlay Hinge, No Mortise, 3 Inch

270 Degree Overlay Hinge, No Mortise, 3 Inch
  • For cabinets with overlay doors.
  • Will allow door to open to 270 degrees.
  • Hinge is 3" tall, wrap around part of hinge leaf is 7/8" wide.
  • Made for doors that are from 1" to 1-1/8" thick.
  • Hinge pin is removeable so that door can be removed after installation.
  • Removeable hinge pin also allows inner leaf to be reversed so that it can be used for both left and right hand opening doors.
  • Each hinge uses #6 flat head screws (5 per hinge), screws are not included but are offered for purchase during checkout. Order SKU 272410 screw pack.
  • Made from steel base material and powder coated white.
Click here for Information & Pricing

2 Inch 270 Degree Hinge

2 Inch 270 Degree Hinge
  • Entertainment center hinge for overlay doors.
  • Allows doors to open 270 degrees when installed in the "full overlay" position.
  • Hinge measures 2" tall (joint length). Wrap around for back of door is 1.5". Wrap around for side panel is 15/16".
  • Hinge is made for 3/4" thick door and 3/4" side panels.
  • Steel base material.
  • Each hinge uses 6 each #6 flat head screws (not included but offered for purchase during checkout).
  • PLEASE NOTE; we have not been able to find a black screw for this hinge. We recommend using a steel plated screw and daubing it with black paint after installation.

Finishes:

  • Polished Nickel
  • Black
Click here for Information & Pricing

270 Degree Partial Wrap Hinge

270 Degree Partial Wrap Hinge
  • Ideal for TV and entertainment units which need wide opening doors.
  • For frameless (no face frame) cabinets with overlay doors.
  • Opens 270 degrees for unobstructed view.
  • For 5/8" thick door and 5/8" thick side panel.
  • Steel base material
  • Uses our #286-254 , 5 x 5/8" bronze plated screws (6 each per hinge, not included but screws are offered for purchase during checkout)

Finishes:

  • Burnished Brass
Click here for Information & Pricing

270 Degree Entertainment Center Hinge

270 Degree Entertainment Center Hinge
  • Entertainment center hinge for overlay doors.
  • Allows door to open 270 degrees.
  • Joint length is 2-3/4".
  • Hinge is made for 3/4" door thickness and 3/4" side panel thickness (for cabinets without a face frame).
  • 2 holes on the door side of the hinge and 2 holes on the frame side of the hinge are elongated for adjustment.
  • Door wrap around distance is 1-3/8".
  • Side panel wrap around distance is 1-7/8".
  • Base material is steel, except for the Satin Stainless Steel model which is solid stainless steel.
  • Uses9 each #8 flat head screws per hinge (not included). Screws are offered for purchase during checkout. Please note; we do not stock a black screw for the black hinge. We are offering a steel screw which can be dabbed with black paint after installation.

Finishes:

  • Brass plated
  • Gloss Black
  • Satin Stainless Steel
  • Dull Chrome
Click here for Information & Pricing

270 Degree 3" Overlay Hinge

270 Degree 3
  • For cabinets with overlay doors
  • This hinge will allow doors to open 270 degrees for an unobstructed view when installed as a "full overlay" hinge (hinge needs to be placed at the corner of the cabinet).
  • For doors that are 1" to 1-1/4" thick.
  • This hinge needs at least 1" of face frame or side wall edge for the hinge to mount to (the bent part of the hinge measures 1")
  • Steel base material.
  • Hinge shown in photo is the Brass plated finish.
  • Matching wood screws are included.

Finishes:

  • Brass Plated
Click here for Information & Pricing

Overlay Lift-Off Hinge, Solid Brass with Bent Leaf

Overlay Lift-Off Hinge, Solid Brass with Bent Leaf
  • Beautifully finished solid brass lift off hinge.
  • Available in two finishes: Polished brass and Satin Nickel.
  • Hinge will "lift off" of the cabinet after installation.
  • Hinge dimensions (this is a metric designed hinge, these dimension are approximate, may vary by 1/32")
    • Height is 2"
    • Width is 3/4"
    • Bent leaf is 1/2"
    • Hinge thickness is 5/64"
    • Made to fit 3/4" or 13/16" thick door
  • Each hinge uses 6 each #6 flat head wood screws. Screws are not included but are offered for purchase during checkout.
  • This hinge works well for installing an overlay door, minimum side panel thickness needed is 11/16".
  • If installed on an overlay door and such that the hinge pin is aligned just outside of the outside surface of the side panel, the door will open 270 degrees (and lay flat along side the side panel when in the fully open position).
  • Hinge is sold by the EACH. You would normally order 2 (each) hinges to hang one door.
  • Hinge shown in above image is the "Right Hand" version of this hinge.
  • This hinge is handed. Please consult the handing comparison before ordering. The handing comparison can be found by clicking on the link below.
Click here for Information & Pricing

Satin Nickel No Mortise Hinge

Satin Nickel No Mortise Hinge
  • For full inset doors where the door is 3/4" in thickness.
  • Hinge leaf wraps around back of door for extra attachment strength.
  • "No mortise" type hinge does not require mortising the door or frame (door gap will be 1/16").
  • Non self-closing hinge.
  • Hinge features decorative tips.
  • Hinge measures 2-1/2" tall. From tip to tip it is 2-3/4" tall .
  • Base material is steel.
  • Screw holes are elongated for vertical and horizontal adjustment.
  • Hinges are sold by the "Each". You would normally order 2 hinges per door.
  • Each hinge uses 6 each #6 flat head screws. Not included but offered for purchase during checkout.
Click here for Information & Pricing

3/4" Wrap Around Hinges-

3/4
  • For full inset doors where doors are 3/4" in thickness
  • Hinge leaf wraps around back of door for extra attachment strength
  • "No-mortise" type hinge does not require mortising the door or frame
  • These hinges work well for entertainment center doors with "articulated" doors
  • Door gap as small as 1/16" because of no-mortise style
  • Non-self closing
  • Hinge is 2-1/2" tall. From tip to tip it is 2-3/4"
  • Base material is steel
  • Screw holes are slotted for easy vertical and horizontal adjustment
  • Screws are included

Finishes:

  • Satin nickel
  • Dark Antique English
  • Burnished Brass
  • Antique English
  • Wrought Iron
  • Polished Brass
  • Oil Rubbed Bronze
Click here for Information & Pricing

3/4" Double Wrap Around Hinges-

3/4
  • For full inset doors where door and face frame are 3/4" in thickness.
  • Hinge leaves wrap around back of door and back of face frame for extra attachment strength.
  • "No-mortise" type hinge does not require mortising the door or frame.
  • These hinges work well for entertainment center doors with "articulated" doors.
  • Door gap as small as 1/16" because of no-mortise style.
  • Non-self closing.
  • Hinge is 2-1/4" tall. From tip to tip it is 2-3/4".
  • Base material is steel.
  • Screw holes are slotted for easy vertical and horizontal adjustment.
  • Screws are included.

Finishes:

  • Satin nickel
  • Dark Antique English
  • Antique English
  • Wrought Iron
  • Polished Brass
  • Oil Rubbed Bronze
Click here for Information & Pricing

270 Degree Overlay Hinge (5/8"-7/8" Door Thickness)

270 Degree Overlay Hinge (5/8
  • 270 degree opening hinge for cabinets with overlay doors.
  • Designed for TV and entertainment units which need wide opening doors.
  • Opens 270 degrees for unobstructed view when installed as a "full overlay" hinge (hinge pin needs to be at the corner of the cabinet).
  • Can be recessed (mortised) into door for a sleek look.
  • For doors 5/8" thick if the hinge is not mortised into the door and 7/8" if the hinge is mortised into the door.
  • Solid brass base material.
  • Hinge dimension: 1-9/16" tall, projects out from cabinet surface 1", attachment to backside of door is 1-3/8".
  • Uses #6 flat head screws, 5 each per hinge (screws are not included but they are offered for purchase during checkout.)
  • Hinge shown in photo is the Polished Brass hinge. All parts of the hinge that are visible after installation are either a highly polished brass or a beautiful satin nickel.

Finishes:

  • Polished brass
  • Satin Nickel
Click here for Information & Pricing

270 Degree Overlay Hinge (3/4"-15/16" Door Thickness)

270 Degree Overlay Hinge (3/4
  • 270 degree hinge for cabinets with overlay doors.
  • Designed for TV and entertainment units which need wide opening doors.
  • Opens 270 degrees for unobstructed view when installed as a "full overlay" hinge (hinge pin needs to be at the corner of the cabinet).
  • Can be recessed (mortised) into door for a sleek look.
  • For doors 3/4" thick if the hinge is not mortised into the door and 15/16" if the hinge is mortised into the door.
  • Solid brass base material.
  • Hinge dimension: 1-9/16" tall, projects out from cabinet surface 1-5/16", attachment to backside of door is 1-3/8".
  • Uses #6 flat head screws, 5 each per hinge (screws are not included but they are offered for purchase during checkout).
  • Hinge shown in photo is the Polished Brass hinge. All parts of the hinge that are visible after installation are either a highly polished brass or a beautiful satin nickel.

Finishes:

  • Polished Brass
  • Satin Nickel
Click here for Information & Pricing

Pivot Hinge 270 Degree

Pivot Hinge 270 Degree
  • Made for overlay cabinet doors up to 1" thick
  • Hinge pivots 270 degrees
  • The plate that attaches to the cabinet measures 1-1/4" x 1". The plate that attaches to the door measures 1-3/8" x 7/8". The pivot point projects out 1-7/16" from the cabinet surface
  • Steel base material
  • Screws not included
  • Uses 12 each #6 screws per pair of hinges(not included). We have not been able to find an exact finish match for the screws. We offer solid brass screws upon checkout which is fairly good match for the finish but not an exact match.

Finishes:

  • Antique Brass
Click here for Information & Pricing

Overlay pivot hinge

Overlay pivot hinge
  • Overlay pivot hinge
  • Made for frameless cabinets with 3/4" side panel thickness.
  • This hinge is a duplicate of Amerock's discontinued 1238 (BP1238) pivot hinge.
  • This hinge has a tab that fixes the overlay at 3/4". This is a full overlay for a 3/4" thick side panel.
  • Image shows one hinge leaf attached to a 3/4" side panel. The other hinge leaf would attach to the back of the door.
  • Installed as a full overlay hinge on a 3/4" side panel with a 3/4" thick door, the door would open 270 degrees.
  • The hinge can be used on face frame cabinets, but the overlay is fixed at 3/4".
  • Made from steel base material with a nickel or bronze finish.
  • Hinge is sold by the pair, a pair is a Left hand and a Right hand (can also be considered a top and bottom) hinge.
  • Fasteners are not included but are offered for purchase during checkout. Each pair of hinges uses 12 each #6 flat head wood screws;
    • For hinge (nickel plated) SKU 286432 use screw SKU 652360
    • For hinge (bronze plated) SKU 286430 use screw SKU 286255

Finishes

  • Nickel
  • Bronze
Click here for Information & Pricing

Aximat Hinges

Aximat Hinges
Aximat hinges are available in a 270 degree opening hinge for entertainment center cabinets.
Click here for Information & Pricing

Mepla 270 Degree Institutional Hinge

Mepla 270 Degree Institutional Hinge
  • Institutional hinge by Mepla, allows door to open 270 degrees.
  • Made for overlay doors on a frameless cabinet with a 3/4" thick side panel.
  • Allows overlays from 10mm (3/8") to 16mm (5/8").
  • Hinges features 3-dimensional adjustment.
  • Made from steel base material, nickel plated with a nylon latching mechanism.
  • PLEASE NOTE: European hinges are a two part hinge composed of a hinge and a mounting plate. Make sure to order a minimum of two hinges and two mounting plates per door.
  • PLEASE NOTE: unlike most European hinges, part of the hinge is visible along the edge of the door when the door is in the closed position.
  • Uses #6 x 5/8" screws (not included) but are offered for purchase during checkout. Order 2 screws per hinge and 3 screws per mounting plate.
Click here for Information & Pricing

Pivot Door Slides

Pivot Door Slides
  • For entertainment centers, armoires and kitchen cabinets. Allows the door to open to 90 degrees and slide back into the inside of the cabinet
  • For door heights up to 42" tall
  • For door thickness of 5/8" to 13/16"
  • Maximum door weight is 30 lbs.
  • For "inset" cabinets without a face frame or "overlay" cabinets with a face frame.
  • For "non-face frame overlay" applications add a Non-Face Frame Overlay Hinge Kit (order our number 268119).
  • This product ships with 35mm diameter cup hinges.
  • Sold by the set. Purchase one set for each door.
  • Can be used for vertical or horizontal doors
  • complete with all hardware

Finishes:

  • Black
Click here for Information & Pricing

Non-face Frame Overlay Hinge Kit

Non-face Frame Overlay Hinge Kit
  • This hinge kit works with our Pivot Door Slides for "Overlay Applications" where there is no face frame.
  • For more information on this item see our "Pivot Door Slides" and click on the Technical Info link
  • These items require a 40mm cup drilled in the door to install.
  • A set includes 2 hinges. One set is needed per door.
  • Hingesare a half cranked 40mm hinge, platesare 0mm. Height to upper pivot point is 1".

Finishes:

  • nickel finish
Click here for Information & Pricing

Heavy Duty Pivot Door Slides

Heavy Duty Pivot Door Slides
  • For entertainment centers, armoires, and kitchen cabinets. Allows the door to open to 90 degrees and then slide back into the inside of the cabinet.
  • This hardware works on frameless (no face frame) cabinets only.
  • Hardware includes "AntiRak Cable System"
  • For door heights from 36" to 78"
  • This product will work for 3 different installation types;
    • Type 1 is an "overlay" door (no face frame) with a 3/4" door thickness. Order our Type 1 hinge kit (SKU 268173) for this installation type.
    • Type 2 is a "flush inset" door (no face frame) with a door thickness from 3/4" to 13/16". Order our Type 2 hinge kit (SKU 268171) for this installation type.
    • Type 3 is a a "flush inset" door (no face frame) with a door thickness from 15/16" to 1-1/4". Order our Type 3 hinge kit (SKU 268172) for this installation type.
  • Maximum door weight is 75 lbs.
  • Can be used for vertical or horizontal doors.
  • A 2" to 2-1/2" wide pocket is required. The pocket is the area that the door slides into.
  • An 8 page instruction booklet is included with purchase.
  • This product is sold by the pair. Order one pair for each door that you are hanging.
  • PLEASE NOTE: THE FOLLOWING ADDITIONAL HARDWARE IS REQUIRED (ITEMS ARE OFFERED FOR PURCHASE DURING CHECKOUT;
    • HINGE CARRIER STRIP KITS
    • HINGE KITS (Type 1, 2 or 3)
    • SEE THOSE ITEMS FOR MORE INFORMATION

Finishes:

  • Black
Click here for Information & Pricing

Type 2 Hinge Kit (Black) for Heavy Duty Pivot Door Slides

Type 2 Hinge Kit (Black) for Heavy Duty Pivot Door Slides
  • This hinge kit works with our Heavy Duty Pivot Door Slides.
  • It is used for "flush inset" doors (no face frame) with a door thickness from 3/4" to 13/16".
  • For overlay doors or doors thicker than 13/16" use our Type 3 Hinge Kit (SKU 268172).
  • These hinges require a 35mm cup to be drilled in the door.
  • They are sold by the set. A set includes 2 hinges, 2 mounting plates, mounting plate spacers, all necessary screws and mounting plate covers.
  • Hinges are 35mmStraight Arm European hinges with 2 mm plates.
  • Use 3 hinges per door for door heights from 36" to 47".
  • Use 4 hinges per door for door heights over 47" to 59".
  • Use 5 hinges per door for door heights over 59" to 71".
  • Use 6 hinges per door for door heights over 71".

Finishes:

  • Black Finish
Click here for Information & Pricing

Type 1 Hinge Kit for Heavy Duty Pivot Door Slides

Type 1 Hinge Kit for Heavy Duty Pivot Door Slides
  • This hinge kit works with our Heavy Duty Pivot Door Slides.
  • It is used for "overlay" doors (no face frame) with a 3/4" door thickness.
  • These hinges require a 40mm cup to be drilled in the door.
  • They are sold by the set. A set includes 2 hinges, 2 mounting plates, mounting plate spacers, all necessary screws and mounting plate covers.
  • Hinges are 40mm Straight Arm European hinges, plates are 0 mm plates.
  • Use 3 hinges per door for door heights from 36" to 47".
  • Use 4 hinges per door for door heights from 47" to 59".
  • Use 5 hinges per door for door heights from 59" to 71".
  • Use 6 hinges per door for door heights over 71".

Finishes:

  • Zinc Finish
Click here for Information & Pricing

Type 3 Hinge Kit for Heavy Duty Pivot Door Slides

Type 3 Hinge Kit for Heavy Duty Pivot Door Slides
  • This hinge kit works with our Heavy Duty Pivot Door Slides.
  • It is used for "flush inset" doors (no face frame) with a door thickness from 15/16" to 1-1/4".
  • These hinges require a 40mm cup to be drilled in the door.
  • They are sold by the set. A set includes 2 hinges, 2 mounting plates, mounting plate spacers, all necessary screws and mounting plate covers.
  • Hinges are 40mm half cranked hinges, plates are 3 mm plates. Height to upper pivot point without spacer attached is 1-1/8". Height with one spacer attached is 1-1/4". Withboth spacers attached, it is 1-3/8".
  • Use 3 hinges per door for door heights from 36" to 47".
  • Use 4 hinges per door for door heights over 47" to 59".
  • Use 5 hinges per door for door heights over 59" to 71".
  • Use 6 hinges per door for door heights over 71".

Finishes:

  • Zinc Finish
Click here for Information & Pricing

Hinge Carrier Strip for Heavy Duty Pivot Door Slides

Hinge Carrier Strip for Heavy Duty Pivot Door Slides
  • This hinge carrier strip kit works with our Heavy Duty Pivot Door Slides
  • Each carrier strip measures approximately 29" by 4"
  • They are sold by the set. A set includes 2 carrier strips, 3 connector clips, and all necessary screws.
  • Use 2 strips per door for door heights from 36" to 56"
  • Use 3 strips per door for door heights over 56"

Finishes:

  • Black Finish
Click here for Information & Pricing
accredited business BBB
Sign up for email updates from HardwareSource and get 5% OFF your next order!
Email:

see what customers are saying

Over 10,000 Reviews
5 Star Average

Thank you for helping us find the hinges no store had! We are were very happy to find the hinges we were looking for - they look great ...
Very reliable vendor - would do business with again. Very prompt shipping and the order was processed flawlessly! ...
Guaranteed: All Valid Reviews Posted
StatisticsReview of HardwareSource.com

Related Products