• Blum Tip-On cabinet touch latches open your cabinet door when you give the door a gentle push inward.
• The Tip-On latch will push the door open wider than most other touch type latches.
• To close cabinet door, simply push the door closed, a magnet at the end of the push rod will keep the door in the closed position.
• Made to be installed in frameless cabinets (cabinets without a face frame).
• May be installed in face frame cabinets by installing a block of wood behind the cabinet face frame.
• For use with free swinging hinges only.
  • Not for use with self-closing hinges
  • Blum is coming out with a Tip-On product for self-closing doors later in 2012
• This product is sold in components. Please make sure to order one Tip-On and one Holder per door.
  • The Tip-On is available in two sizes
    • Standard Duty, SKU 268040 (for door heights less than 48")
    • Heavy Duty, SKU 268041 (for door heights 48" or more)
  • The Holder is available in two types
    • Wing Type (2 attachment screw holes are visible), SKU 268043
    • In-Line Type (screw holes are not visible), SKU 268042
  • Tip on can be installed without a holder
    • Drill a 10mm hole in the cabinet side panel
    • Install the "Tip On" in the 10mm hole
    • See Support Link below for more info on this installation method
• Strike plates (a self sticking plate and a screw on plate and screw) are included with purchase of a Tip-On (SKU's 268040 or SKU 268401).
• Screws are not included for either of the Holders. They are offered for purchase during checkout. Order 2 each #6 flat head screws (SKU 652360) per holder.

• Elbow catch for cabinet doors.
• An elbow catch is typically used for cabinets which have two doors covering an opening.
  • One door uses an elbow catch to secure the door in the closed position.
  • The second door is secured using a touch latch, magnetic latch or a friction catch.
  • To open the doors, first open the door with the touch, magnetic or friction catch, then reach in behind the door and release the elbow catch.
• Measurements
  • Catch mounting plate measures 5/8" x 1-3/8".
  • Projection is 1-1/2"
  • Strike plate measures approximately 3/4" x 5/8".
• Made from aluminum with some steel components.
• Pan head screws are included.

• Elbow catch for cabinet doors.
• Economy model.
• An elbow catch is typically used for cabinets which have two doors covering an opening.
  • One door uses an elbow catch to secure the door in the closed position.
  • The second door is secured using a touch latch, magnetic latch or a friction catch.
  • To open the doors, first open the door with the touch, magnetic or friction catch, then reach in behind the door and release the elbow catch.
• Measurements
  • Catch mounting plate measures 3/4" x 1-1/16".
  • Projection is 1-1/8"
  • Strike plate measures approximately 1/2" x 1".
• Made from stamped steel.
• Pan head screws and brads are included.
• Sold and priced by the pack. A pack includes two catches, two strikes, screws and brads.

• Touch latch for cabinet doors.
• Touch latch holds the door in the closed position when you push it closed.
• To release the touch latch simply push on the door and the latch releases.
• Latch measures approximately 2-1/8" long by 1-1/8" wide. Projection is 7/8" (closed) and 1-5/8" open.
• Includes latch strike plate, made from white nylon.
• Latch is made of steel with nylon roller and strike.
• Image shows latch in the open or released position.
• Each latch uses 6 number 4 round head screws. Not included but offered for purchase during checkout. We do not stock any brass round head screws. We only have stainless steel pan head screws available for this product.

• Mini touch latch for cabinets
• Latch installs on the underside of shelf or cabinet top.
• Strike plate installs on the back of the door.
• Touch latches are concealed when the door is in the closed position.
• To open the cabinet, give the door an inward push, the latch will spring the door slightly open.
• Made from steel with nylon parts.
• Matching screws are included.

Finishes

• Brass plated with brown strike plate and roller
• Zinc Chromate with white strike plate and roller

• Double ball catch for cabinet doors.
• Solid brass ball catch features two spring loaded ball bearings.
• Spring power is adjustable.
• Ball catch can be surface mounted or mortised into cabinetry.
• Made from solid brass material with steel ball bearings. PLEASE NOTE: ball bearings will rust if used in corrosive or marine environment.
• Available in 4 sizes (measurements taken in closed position)
  • SKU 286230 measures 1-11/16" tall by 5/16" wideby 1/2" tall. Uses 4 each #5flat head wood screws (not included).
  • SKU 286232 measures 1-15/16" tall by 11/32" wide by 1/2" tall. Uses 4 each #5 flat head wood screws (not included).
  • SKU 286234 measures 2-5/16" tall by 5/16" wide by 5/8" tall. Uses 4 each #6 flat head wood screws (not included).
  • SKU 286236 measures 2-11/16" tall by 1/2" wide by 21/32" tall. Uses 4 each #6 flat head wood screws (not included).
• Flat head brass wood screws are offered for purchase during checkout.

• Double magnetic catch is used for double door cabinets
• Magnetic catches are used on cabinets with free swinging (non self-closing) hinges
• Measures 3-3/8" long by 1" wide by 1/2" tall
• Steel base material
• Mounting screws are included

Finishes:

• Zinc plated

• Used on cabinets with free swinging (non-self closing) doors
• Catch measures 2" long by 1-1/4" wide by 1/2" tall
• Mounting screws are included
• Plastic and steel base material

Finishes:

• Brown plastic

• Magnetic catches are used on cabinets with free swinging (non self-closing) hinges
• Catch measures 2" long by 1-1/4" wide by 5/8" tall
• Aluminum base material
• Mounting screws are included

Finishes:

• Natural aluminum

• Magnetic touch latch for cabinet doors
• When you push in on cabinet door, door pops out and is released from magnetic hold.
• Includes mounting screws and steel plate for inside of cabinet door.
• Size is approximately 1-3/4" long by 1-3/4" wide by 3/4" projection.

Finishes:

• Brown plastic
• White Plastic

• It is known as a "Secret Gate Latch" but it is actually more of a cabinet latch.
• It is used in banks, offices, restaurants and bars as a latch to secure a hinged countertop.
• Because the button to unlatch it is not obvious it acts as a low security device.
• It can be used on any hinged device where you can reach around and access the button on the latch.
• Made from aluminum with some steel parts.
• Latch is reversible (open device and flip latch over to reverse)
• Gap must be no more than 1/4" for latch to work (latch projects 3/8").
• Latch is 3.5" long and 2" wide. Strike is 3/4" long and 2" wide. Latch is approximately 5/8" thick.
• Oval head wood screws are included.

Finishes:

• Sprayed Aluminum Finish (similiar to polished chrome)