Blum Thick Door Hinge for Face Frame Inset Cabinets - Bundle
- Blum's thick door half cranked clip top hinge for face frame inset cabinets.
- For door thicknesses from 19mm (3/4") to 30mm (1-1/8").
- Please reference the minimum reveal information link under "More Information" below to verify if this bundle will work for you.
- 1 Blum Thick Door Half Cranked Hinge
- 1 Blum Face Frame Adapter Mounting Plate
- Two #6 x 5/8" screws for the hinge
- Important Note: Two #8 pan head screws are required for the mounting plate but are not included in this bundle. This is because at the time we only sell these screws in packs of 5. To purchase these screws, please see the related products below (SKU 135410).
- Cover Plate for Arm Part of Hinge - Hides the screws on the hinge arm providing a cleaner appearance
- Cover Plate for Cup Side of Hinge - Hides the screws on the cup side providing a cleaner appearance
- Soft-Close Add-On Device - Eliminates slamming of the door and dampens the closing action
Available for purchase separately:
- Pack of five #8 x 3/4" pan head screws. Two screws are required for each adapter plate purchased. (SKU 135410)
- Blum Platemate. To drill the angled holes for the adapter plate the purchase of the Blum Platemate is highly recommended although not absolutely necessary. The Blum Platemate clamps on the edge of the face frame and allows accurate drilling of the adapter plate screw holes. (SKU 268227)
- PLEASE NOTE: THE BLUM PLATEMATE IS A NON-RETURNABLE ITEM.
- Plastic Dowels, used on manufactured wood products where wood screws do not hold well (SKU 652368)
- Blum Touch Latch for Self-Closing Doors (SKU 268822)
- 35mm Forstner Bit, for new installations (SKU 204000)
- Ecodrill, installation jig, for new installations (SKU 701000)
|Model #||Hinge: 71T9680
Mounting Plate: 175H5030.21
|Cabinet Door Type||Flush Inset, Thick Door|
|Cabinet Type||Face Frame|
|Plate Connection Type||Clip-On|
|Opening Angle||95 Degrees|
|Screw Hole Spacing||45mm (1-3/4")|
|Mounting Hardware Included||Yes|
|Mounting Hardware Type||Two #6 wood screws for the hinge and two #8 pan head screws for the mounting plate (not included)|