| |
|
 | | |
- - WHAT IS A PAIR OF HINGES?
DOOR HINGES
Baldwin Hinges
Plain Bearing Butt Hinges
Ball Bearing Butt Hinges
Spring Hinges - Double Acting Hinges
Pivot Hinges - Pivot Sets
Screen Door Hinges - Screen Door Locks
Wide Throw Hinges - Swing Clear Hinges
Special Purpose Hinges
Invisible Hinges and Soss Hinges
Door Hardware
CABINET HINGES
Semi Concealed Cabinet Hinges
Surface Mounted Cabinet Hinges
Overlay Hinges - Inset Hinges
Demountable Hinges
Youngdale Hinges
European Hinges - Blum Hinges
Pivot Hinges for Cabinets
Pivot Door Slides - Flipper Door Slides
Entertainment Center Cabinet Hinges
Small Ball Tip Cabinet Hinge
Tray Hinges - Other Cabinet Hardware
FURNITURE HINGES
Table Hinges - Shelf Hinges
Butler Tray Table Hinge
Finial Tipped Hinges
Desk Hinges - Sewing Machine Hinges
Concealed Hinges - Hidden Hinges
Special Purpose Furniture Hinges
Lift-off Hinges - Loose Joint Hinges
Glass Door Hinges
GATE HINGES AND HARDWARE
Gate Latches - Gate Locks
Bolt, Screw, Strap & Pintle Hinges
Gate Strap Hinges
Gate Tee Hinges
Gate Pivot Hinges
Swimming Pool Gate Hinges - Latches
Gate Spring Hinges
Cane Bolts - Gate Wheels - Gate Closers
Gate Grills -Gate Handles -Gate Pulls -Gate Stops
Solid Bronze Gate Hardware
SPECIALTY HINGES
Small Butt Hinges
Piano Hinges - Continuous Hinges
Soss Hinges & Other Invisible Hinges
Strap Hinge - Dummy Strap Hinges
No Mortise Hinges - Bi-Fold Door Hinge
Tee Hinges
Chest Hinges - Box Hinges - Lid Supports
Garage Door Hinges
Folding Screen Hinges
Refrigerator Hinges - Ice Box Hinges
Weld-on Hinges - Welding Hinges
Shower Door Hinges
SHUTTER & WINDOW
Shutter Hinges, Interior
Shutter Hinges, Exterior
Shutter Dogs, Exterior
Shutter Hardware, Exterior
Window Hinges
Window Hardware
Truth Window Hardware
SCREWS
STAINLESS STEEL HINGES & HARDWARE
Butt, Strap & Tee Hinges, Stainless
Gate Hardware & Hinges, Stainless
Cabinet & Furniture Hardware & Hinges, Stainless
Window & Shutter Hardware & Hinges, Stainless
Industrial Hinges, Stainless
Screws, Stainless Steel
| | |
Recent Customer Feedback:
I have to say that I am not only
impressed by the stock that you
offer but that I am thrilled by the
fact that you have delivered what
I ordered when I asked that it be
delivered. With all of the "big box"
home improvement centers
replacing the older hardware
stores it has become increasingly
tougher to find repair parts. After
surfing your site a bit it is obvious
that you folks are a place that I will
recommend to my buddies for their
cabinet repair and construction
needs. Thanks so much for taking
such excellent care of me. - Joe
How fast and helpful you have
been in helping me, not only to
get info on your product but also
the web site to help me build the
door/bookshelf I wanted to
achieve. Thank you for your quick
and accurate help. -Jill O'Brien
Thank you for the prompt response.
If I can't find 'em, I'll be back for
the bigger hinges and just recut the
doors. Thanks again. Your customer
service makes you stand out from
your competitors. -Dennis Fitch
|
|
|
Home > DOOR HINGES > Door Hardware
Door Hardware
Decorative Straps for Doors
Finishes:
- Black Iron
- Hammered Black Iron
- Flat Black Iron
|
|
Description:
|
|
- We have a good selection of decorative straps for doors. These decorative straps are used in combination with an appropriate butt hinge. A butt hinge gives you a much higher weight rating for your door than a strap hinge. The decorative strap hinge gives you the look you are after.
|
|
Grilles for Doors
|
|
Description:
|
|
Grilles are installed on the exterior of your door and provide security for your speakeasy opening. |
|
Door Pulls
|
|
Description:
|
|
Large pulls for doors which do not require a latch or lock. |
|
Clavos
Finishes:
|
|
Description:
|
|
- Clavos are a decorative hardware item that is used to dress up doors, cabinets, etc.
- Available in either a round, square or pyramid shape and in various sizes.
- Fits into a 7/32" diameter by 1/2" deep drilled hole.
- Forged iron base material.
|
|
Large Round Clavos
Finishes:
|
|
Description:
|
|
- Clavos are a decorative hardware item that is used to dress up doors, cabinets etc. Clavos may also be used to hide a screwhead.
- These clavos install with a welded on nail. To install predrill a 1/8" or slightly larger hole and gently push the clavos into the wood. It is not advisable to use a hammer to install these clavos.
- Made from steel.
- There are two different diameter sizes available. They both project about 1/2" from the surface after installion.
|
|
Door Studs, Solid Bronze
Finishes:
|
|
Description:
|
|
- Solid bronze door studs (also known as "Clavos" are a decorative item used to dress up doors or gates.
- They are made from solid bronze and will age like the other bronze items shown on our website.
- These door studs are available in two shapes; round and square. And they are available in two sizes; 1" and 2".
- Door studs install by gently taping into a pre-drilled hole in the door or gate.
|
|
Overhead Door Holder & Stop
Finishes:
- Satin Stainless Steel
- Oil Rubbed Bronze
- Polished Brass
|
|
Description:
|
|
- Door holders allow you to open the door to a set position between 85 and 110 degrees
- The door then holds at that set position until you release it
- Not handed, works on left or right hand opening doors
- Designed for installation in virtually all types of doors and frames, including doors with conventional butt hinges, offset pivots, continuous hinges, swing clear hinges, Soss hinges and others.
- Allows for variable mounting positions ranging from 85 degrees to 110 degrees of opening.
- Available in two different types; One for door openings from 27-1/16" to 33" and the other for door openings from 33-1/16" to 39"
- PLEASE NOTE; Overhead door holders are made from steel base material. The Satin Stainless steel model is made from stainless steel but has internal parts made from steel and other non-stainless steel materials.
|
|
Hinge Pin Door Stop, Adjustable
Finishes:
- Brass
- Oil Rubbed Bronze
- Satin Nickel
|
|
Description:
|
|
- adjustable doorstop installs in door hinge and is held in place by hinge pin
- this hinge pin door stop is adjustable to stop the door at your choice of 5 different points
- solid brass material
- nylon hinge pin bearing (1/4" inside diameter)
- rubber bumpers to protect door and door molding
- size is approximately 3-1/2" x 2-1/4" as shown in the wide open position
|
|
Hinge Pin Door Stop
Finishes:
- Satin Nickel
- Polished Brass
- Oil Rubbed Bronze
|
|
Description:
|
|
- Installs under top of hinge pin on your door hinge to provide a door stop
- Solid Brass base material
- Adjustable
- Rubber bumpers protect your door and molding around door jamb
- Door stop has a nylon hinge pin bushing (not shown) with 1/4" inside diameter
- The nylon hinge pin bushing can be removed which will provide a 5/16" inside diameter
- Compact design (approximate size is 2-1/4" x 1-3/4")
|
|
Pocket Door Locks
Finishes:
- Polished Brass
- Antique Brass
- Polished Chrome
- Satin Chrome
- Polished Nickel
- Satin Nickel
- Oil Rubbed Bronze
- Split Finish Polished Brass/Polished Chrome
|
|
Description:
|
|
- Pocket Door Lock fits 1-3/8" thick door
- Available in Passage type(non-locking) and Privacy type (locking)
- Measures 2-1/2" by 2-3/4"
- Fits a cutout in door measuring 2-1/4" high by 1-3/4" deep
- Split finish model is typically used in bathrooms with the polished chrome side on the bathroom side
- Matching screws are included
- Matching strike is included on privacy type (locking)
|
|
Adjustable Pocket Door Locks
|
|
Description:
|
Finishes: |
- Pocket Door Lock fits doors from 1-3/8" to 1-3/4"
- Available in Passage type (non-locking) and Privacy type (locking)
- Measures 3-1/4" 2-1/4"
- Fits a cutout in door measuring 2-3/4" high by 1-3/4" deep
- Matching screws are included
- Matching strike plate is included in privacy type (locking)
|
- Polished Brass
- Oil Rubbed Bronze
- Satin Nickel
|
|
Rotary Edge Pull for Pocket Doors
|
|
Description:
|
Finishes: |
- Pull for pocket doors remains recessed in edge of door until you push on the tab at the bottom and pull it to the open position.
- Made from solid stainless steel material.
- Mounting plate measures 5-5/8" by 3/4".
- Fits into a cutout that is 5/8" by 4-1/2" by 2-1/4" deep.
- Pull projects about 2" when in the open position.
- Uses #8 flat head screws. Not included but offered for purchase during checkout.
|
|
|
Tear Drop Edge Pull, Stainless Steel
Finishes:
|
|
Description:
|
|
- Tear drop style edge flush mounted edge pull for sliding doors and cabinets.
- Measures 3-3/4" tall by 1-5/16" wide by 9/16" thick.
- Edge pull fits into a cutout which measures 3-1/2" tall by 1-1/32" wide by 1/2" deep.
- Made from solid stainless steel.
- Attaches with one flat head screw which is included.
- In its normal position the pull hangs vertically in the box. Photo shows the pull at a slight angle for effect.
|
|
Door Stops, Extra Tall
Finishes:
- Polished Brass
- Oil Rubbed Bronze
- Satin Nickel
|
|
Description:
|
|
- This door stop is great for areas where you need an extra tall door stop (for example on out swinging doors)
- Door stop measures about 6" from the floor to the top of the black rubber bumper
- Base measures 3" in diameter, rubber bumper is about 1" in diameter
- Made of solid brass base material
- Includes all fasteners and masonary anchors needed for installation
- Includes a hook plate to attach to your door to hold the door in the open position
|
|
Magnetic Door Holder
|
| Finishes: |
- Polished Brass
- Oil Rubbed Bronze
- Satin Nickel
- Antique Brass
|
|
Magnetic Door Holder, Flush Model
Finishes:
- Satin Nickel
- Oil Rubbed Bronze
- Lifetime Polished Brass
|
|
Description:
|
|
- Flush magnetic door holder is made up of two parts; a floor plate and a door plate. The door plate has a strong magnet installed on its underside. The Floor plate has a flat steel plate that is hinged on one side.
- As the bottom of the door approaches the floor plate the magnet in the door plate pulls the steel lever up and grabs it to hold the door in place.
- This magnetic door holder allows for a low profile less obtrusive magnetic door holder.
- The floor plate is 2-7/16" in diameter and projects just 3/16".
- The door plate measures 2-1/4' x 3/4" and projects 1".
- For this device to work properly the bottom of your door must be no more than 7/8" from the surface of the floor below it.
- Except for the steel lever plate and the magnet the entire device is made from solid brass.
- Matching wood screws are included.
|
|
Magnetic Door Holder, Polycarbonate
Finishes:
|
|
Description:
|
|
- Magnetic door holder will hold the door in the open position until it is pulled closed.
- Features a powerful magnet which has a 30lb pull.
- Door holder is made up of two pieces; a door plate and a magnetic upright.
- The door plate attaches to the back of the door. It is approximately 2" in diameter and projects 3/4".
- The magnetic upright may be attached to either the floor in a vertical position or to the wall in a horizontal position. The magnetic upright measures 3" tall. Its baseplate is 2-1/8" in diameter.
- This product is made from a very strong polycarbonate material. The magnet has a plated steel holder and receiver.
- Mounting screws are included.
|
|
Magnetic Door Holder, Small
Finishes:
|
|
Description:
|
|
- Magnetic door holder will hold the door in the open position until it is pulled closed.
- Features a magnet with an 18lb pull.
- Door holder is made of two pieces; a door plate and a magnetic upright.
- The door plate attaches to the back of the door. It measures 1-7/8" by 1-5/8" and projects 7/16".
- The magnetic upright may be attached to either the floor in a vertical position or to the wall in a horizontal position. It measures 2-5/8" tall. Its base plate is approximately 1-3/4" by 2".
- Product is made from plastic. The magnet is held in place by a steel holder and the wall plate has a steel plate to attract the magnet.
- Mounting screws are included.
|
|
Chain Door Restraint with Springs
Finishes:
|
|
Description:
|
|
- This heavy duty chain door restraint can be installed to restrict the swing of a full size door. For example in a windy area or in an area where the door would hit something if opened too far.
- The chain door restraint is made up of two solid brass end brackets, each attached to a spring. The middle part is a heavy duty solid steel welded chain. The length of chain is covered by a grey vinyl covering.
- Recommended for doors with a maximum width of 36".
- Screws for the end brackets are included.
- The total length of the chain door restraint is 26.5". The end bracket mounting plate measures 1.5" by 1.5
|
|
Spring Door Holder
Finishes:
- Brass
- Oil Rubbed Bronze
- Satin Nickel
|
|
Description:
|
|
- Spring door holder keeps door in the open position
- Made up of two parts: the spring keeper and the post.
- The post is solid brass. The spring keeper is plated spring steel.
- After installation the door holder allows 2-5/8" clearance between surface of the door and the wall.
- The spring keeper measures about 2" tall by 2-1/8" wide (base) by 3/4" thick.
- The post measures 2" tall.
- Wood screws are included.
|
|
Security Stud for Hinges
Finishes:
- Brass plated
- Chrome plated
|
|
Description:
|
|
- Security studs are used for exterior doors that open outward. Doors that open outward have their hinge pins on the outside of the building.
- If a potential intruder removes the hinge pins, the security stud protects the door from being removed by locking the leaves of the hinges together.
- To install the security studs, remove two screws from your hinge. These two screws must be aligned back to back when the hinge (or door) is closed.
- Replace one of the screws with a security stud and drill a receiving hole in the other empty screwhole
- When the door closes the security stud will slide into the receiving hole locking the two hinge leaves in place
- Security studs are available to fit a #10 screwhole and a #12 screw hole
- To determine your screw hole size it is best to take a countersunk screw with a known size and place it in the hinge screw hole.
- A #10 countersunk head screw measures 11/32" across the head. A #12 countersunk head screw measures 3/8" across the head.
- The larger studs (SKU 309250 and SKU 309252) are threaded with a 12-24 machine screw thread which matches the thread that is used on metal door frames. Both size studs will work on wood doors and frames.
- They are sold by the pair (two studs)
|
|
Push Plates for Doors
|
|
Description:
|
Finishes: |
- Push plates are used for double acting doors which are typically located between the kitchen and dining room
- Available in two sizes; 3-1/2" by 15" and 4" x 16"
- Base material is solid brass except for the Satin Nickel (Satin Stainless) which is made from solid stainless steel.
- Matching wood screws are included
- Material is 3/64" thick
|
- Polished Brass
- Satin Nickel (Satin Stainless)
- Oil Rubbed Bronze
|
|
Hinge Pins
|
|
Description:
|
Finishes: |
- Hinge pins are not universal. Each manufacturer makes his hinge pins in a different size that will only fit the hinge that it was made for.
- We carry only two hinge pins and they are made for Stanley residential hinges with a 0.234" hinge pin thickness.
- We carry them in two sizes; one fits a 3-1/2" by 3-1/2" hinge and the other fits a 4" x 4" hinge.
- Steel base material.
|
|
|
Hinge Pin Door Closer
|
|
Description:
|
Finishes: |
- Automatic door closer device works by removing your existing hinge pin and replacing it with the "Hinge Pin Door Closer".
- Easy to install.
- Works for most doors that are 30 lbs. or less. For doors that are more than 30 lbs. use a second hinge pin door closer on the door on the bottom hinge.
- Available in brass finish or satin nickel finish.
- Comes with wrench to adjust tension.
|
|
|
Invisible Touch Latch for Full Size Doors
|
|
Description:
|
|
- Touch latch is invisible from the outside of the door.
- When you use a touch latch no other hardware (knob, pull, latch) is needed on your door giving it a clean look.
- Available in either a regular duty or heavy duty model. The heavy duty model is slightly larger and has much stronger spring action. Use the heavy duty model for solid core or heavy doors.
- How it works; gently push in on the outside surface of the door. The door releases from the latch and pops outward.
- The auxiliary pusher (sold separately) is used where a vacuum condition exists (for example a small closet) or any situation where the door does not open easily.The auxiliary pusher may be used with either the regular duty or heavy duty latch.
- All mounting fasteners, a metal template and full instructions are included.
- The face and internal parts of the latch are made from solid brass and steel. The case is made from plastic.
- The auxiliary pusher is made from solid brass and nylon and the spring is made from steel.
|
|
Ball Catch for Full Size Doors
|
|
Description:
|
Finishes: |
- Adjustable ball catch and strike plate are made to hold full size doors.
- Invisible when the door is closed.
- Made from solid brass. Ball and spring are made from steel.
- Ball catch has two adjustments. The spring tension on the ball is adjustable and the amount of ball showing above the surface of the mounting plate is adjustable.
- Complete with matching wood screws and strike plate.
- PLEASE NOTE: The "Venetian Bronze" finish is a special finish made by Baldwin. To view it click on the link below.
|
- Polished Brass
- Satin Nickel
- Satin Chrome
- Oil Rubbed Bronze
- Antique Brass
- Venetian Bronze (Baldwin)
- Polished Chrome
|
|
|
|
|
