| |
|
 | | |
- - WHAT IS A PAIR OF HINGES?
DOOR HINGES
Baldwin Hinges
Plain Bearing Butt Hinges
Ball Bearing Butt Hinges
Spring Hinges - Double Acting Hinges
Pivot Hinges - Pivot Sets
Screen Door Hinges - Screen Door Locks
Wide Throw Hinges - Swing Clear Hinges
Special Purpose Hinges
Invisible Hinges and Soss Hinges
Door Hardware
CABINET HINGES
Semi Concealed Cabinet Hinges
Surface Mounted Cabinet Hinges
Overlay Hinges - Inset Hinges
Demountable Hinges
Youngdale Hinges
European Hinges - Blum Hinges
Pivot Hinges for Cabinets
Pivot Door Slides - Flipper Door Slides
Entertainment Center Cabinet Hinges
Small Ball Tip Cabinet Hinge
Tray Hinges - Other Cabinet Hardware
FURNITURE HINGES
Table Hinges - Shelf Hinges
Butler Tray Table Hinge
Finial Tipped Hinges
Desk Hinges - Sewing Machine Hinges
Concealed Hinges - Hidden Hinges
Special Purpose Furniture Hinges
Lift-off Hinges - Loose Joint Hinges
Glass Door Hinges
GATE HINGES AND HARDWARE
Gate Latches - Gate Locks
Bolt, Screw, Strap & Pintle Hinges
Gate Strap Hinges
Gate Tee Hinges
Gate Pivot Hinges
Swimming Pool Gate Hinges - Latches
Gate Spring Hinges
Cane Bolts - Gate Wheels - Gate Closers
Gate Grills -Gate Handles -Gate Pulls -Gate Stops
Solid Bronze Gate Hardware
SPECIALTY HINGES
Small Butt Hinges
Piano Hinges - Continuous Hinges
Soss Hinges & Other Invisible Hinges
Strap Hinge - Dummy Strap Hinges
No Mortise Hinges - Bi-Fold Door Hinge
Tee Hinges
Chest Hinges - Box Hinges - Lid Supports
Garage Door Hinges
Folding Screen Hinges
Refrigerator Hinges - Ice Box Hinges
Weld-on Hinges - Welding Hinges
Shower Door Hinges
SHUTTER & WINDOW
Shutter Hinges, Interior
Shutter Hinges, Exterior
Shutter Dogs, Exterior
Shutter Hardware, Exterior
Window Hinges
Window Hardware
Truth Window Hardware
SCREWS
STAINLESS STEEL HINGES & HARDWARE
Butt, Strap & Tee Hinges, Stainless
Gate Hardware & Hinges, Stainless
Cabinet & Furniture Hardware & Hinges, Stainless
Window & Shutter Hardware & Hinges, Stainless
Industrial Hinges, Stainless
Screws, Stainless Steel
| | |
Recent Customer Feedback:
I have to say that I am not only
impressed by the stock that you
offer but that I am thrilled by the
fact that you have delivered what
I ordered when I asked that it be
delivered. With all of the "big box"
home improvement centers
replacing the older hardware
stores it has become increasingly
tougher to find repair parts. After
surfing your site a bit it is obvious
that you folks are a place that I will
recommend to my buddies for their
cabinet repair and construction
needs. Thanks so much for taking
such excellent care of me. - Joe
How fast and helpful you have
been in helping me, not only to
get info on your product but also
the web site to help me build the
door/bookshelf I wanted to
achieve. Thank you for your quick
and accurate help. -Jill O'Brien
Thank you for the prompt response.
If I can't find 'em, I'll be back for
the bigger hinges and just recut the
doors. Thanks again. Your customer
service makes you stand out from
your competitors. -Dennis Fitch
|
|
|
Home > FURNITURE HINGES > Desk Hinges - Sewing Machine Hinges
Desk Hinges - Sewing Machine Hinges
2" x 3" Desk Hinge, Solid Brass
|
|
Description:
|
|
- High quality American made hinge
- Hinge measures 2" high (hinge pin length) by 3" wide by 1/8" thick
- Solid Brass base material
- Matching flat head wood screws are included
|
|
1-1/2" x 2-3/8" Desk Hinge
|
|
Description:
|
|
- High quality American made product
- Hinge measures 1-1/2" high (hinge pin length) by 2-3/8" wide by 3/32" thick
- Solid Brass base material
- Matching flat head wood screws are included
|
|
Back Flap Hinge
|
|
Description:
|
Finishes: |
- for heavy cabinet work, folding shelves and table drop leaves
- hinge is a surface mounted hinge (may be partially mortised into the surface)
- fast spun pins
- hole patterns and number may vary from picture depending on size of hinge
- steel base material
- wood screws are included
|
|
|
Hinge for Writing Desk
|
|
Description:
|
|
- hinge is used on the drop flap of a writing desk
- measures 3" long by 1/2" wide by 1/8" thick
- solid brass base material
- comes with matching flat head wood screws
|
|
Sewing Machine Hinge, Brass Plated
|
|
Description:
|
Finishes: |
- 3-1/8” open
- 1-3/16” wide
- 1/16” material thickness
- steel base material
- uses #8 flat head screws (not included but offered for sale during checkout).
|
|
|
Sewing Machine Hinge, Bronze Finish
|
|
Description:
|
Finishes: |
- 3-1/8" open
- 1-3/16" wide
- 1/16” material thickness
- Steel base material
- Uses #8 flat head screws (not included)
|
|
|
Friction Flap Stay
Finishes:
- Nickel plated steel, white plastic
|
|
Description:
|
|
- Flap stays hold flap or desk top in horizontal position.
- They are meant to be used in conjunction with a hinge.
- By tightening the screws on the white plastic block, friction is increased to control how fast the flap drops.
- Available in 2 sizes.
- Screws are not included but are offered for purchase during checkout. Order 2 each #6 flat head screws for plastic blocks. Order 2 each #4 flat head screws for base attachment.
|
|
Flap Stay, Vertical Rod Type
Finishes:
|
|
Description:
|
|
- Flap stay supports fold down desk tops.
- Available in two sizes; 7-7/8" and 9-7/8". Choose the size that fits your "Inside Cabinet Height". See installation diagram below for more information on this.
- Features a brake adjustment screw to control braking action.
- Made from steel and die cast parts with nylon internal parts.
- Each flap stay uses 6 each #6 flat head screws (not included but offered for purchase during checkout).
- Non-handed; works in both right hand and left hand applications.
|
|
Reversible Flap Stay
Finishes:
- Nickel plated steel, black plastic
|
|
Description:
|
|
- Drop stay gently lowers and holds drop down desk surfaces and flaps.
- Reversible, can be installed on left or right hand side.
- Length is approximately 9". For detailed dimensions, click on link below.
- This product is meant to be used with separate hinges.
- Click on the link below to see what flap sizes this product will support.
- Screws are included.
|
|
Secretary Desk Hinge
|
|
Description:
|
Finishes: |
- For secretary type desks.
- Hinge opens desk top to horizontal position.
- After installed, desk top will close to about 45 degrees (or 135 degrees from horizontal).
- Overall length of hinge is 7" in open position.
- Width of hinge is 3/4".
- Steel base material.
- Matching wood screws are included.
|
|
|
Friction Type Lid Support, Reversible Action
Finishes:
|
|
Description:
|
|
- Lid support is convertible, reversible, adjustable and demountable.
- Can be used on a horizontal lid, a vertical lid or a drop down lid.
- The friction on the lid support is adjustable. It is active in one direction with no friction in the opposite direction.
- Both lid support attachments are demountable (they snap out) from from the lid support.
- The demountable feature allows you to reverse the direction that the friction is applied.
- The slide button near the hub of the lid support allows you to change the direction of the friction action from up-opening to down-opening.
- Overall length of lid support is approximately 8" not including attachment ends.
- Two lid supports can support a lid weighing up to 20 lbs.
- Made from die cast zamak
- Uses #6 flat head screws (not included but offered for purchase during checkout). Uses 4 screws per lid support.
|
|
Cabinet Door Restraint
|
|
Description:
|
|
- This device may be used for limiting the swing of a cabinet door anywhere from 0 to slightly more than 90 degrees depending on how you elect to install the mounting plates.
- A typical installation would be to mount the right angle swivel plate on the inside surface of the door and to mount the second plate on the underside of a shelf or the underside of the top of the cabinet.
- Available in a "Left Hand" or "Right Hand" model.
- Use a "Right Hand" model if your door is hinged on the right hand side of the cabinet as you are facing the cabinet.
- This device may also be used to support drop down desk tops. If ordering for use as a drop down desk support, order one "Left Hand" and one "Right Hand" model.
- Uses 2 each #4 flat head screws (not included but offered for purchase during checkout).
- PLEASE NOTE: the photos to the left show the product in a vertical position. When used as a cabinet restraint they will be installed in a horizontal positon.
|
|
Drop Flap Hinge, All metal
|
|
Description:
|
Finishes: |
- Allows drop panel to fold down and hold at 90 degrees
- Fits a 35mm (1-3/8") hole
- Hinge is detachable and adjustable
- Zinc die cast material
- Hinge thickness is 1/2"
- Uses #5 Flat head screws (not included)
|
- Dark bronze
- Satin Brass
- Nickel
|
|
Drop Flap Hinge, Metal
|
|
Description:
|
Finishes: |
- Allows panel to fold down and hold at 90 degrees
- Fits a 35mm (1-3/8") hole
- Hinge is detachable and adjustable
- Zinc die cast material
- Hinge thickness is 15/32"
- Screws are not included
|
|
|
Drop Flap Hinge, Nylon
|
|
Description:
|
|
- flap opens 90 degrees, flush with inside shelf
- fits flush in door & shelf surfaces, concealed from exterior
- 30mm Forstner or flat boring bit needed to install
- for 3/4” thick doors
- hinge thickness is 7/16"
- linkage is brass and steel
- hinge is made from nylon material
- Uses #4 x 5/8” oval head wood screws (Not included)
|
|
30mm Plastic & Metal Flap Hinge
|
|
Description:
|
Finishes: |
- Flap opens 90 degree flush with inside shelf
- Fits flush in door & shelf surfaces, concealed from exterior
- Click on link below for more install information
- Uses #3 Flat head screws (not included)
- Hinge is 3-way adjustable and detachable
|
- White plastic and Chrome plated
|
|
30mm All Metal Flap Hinge
|
|
Description:
|
Finishes: |
- Flap opens 90 degrees flush with inside shelf
- Fits flush in door & shelf surfaces, concealed from exterior
- Click on link below for more install information
- Uses #4 Flat Head screws (not included)
- Hinge is 3-way adjustable and detachable
|
- Dark Bronze plated
- Nickel plated
|
|
|
|
|
