| |
|
 | | |
- - WHAT IS A PAIR OF HINGES?
DOOR HINGES
Baldwin Hinges
Plain Bearing Butt Hinges
Ball Bearing Butt Hinges
Spring Hinges - Double Acting Hinges
Pivot Hinges - Pivot Sets
Screen Door Hinges - Screen Door Locks
Wide Throw Hinges - Swing Clear Hinges
Special Purpose Hinges
Invisible Hinges and Soss Hinges
Door Hardware
CABINET HINGES
Semi Concealed Cabinet Hinges
Surface Mounted Cabinet Hinges
Overlay Hinges - Inset Hinges
Demountable Hinges
Youngdale Hinges
European Hinges - Blum Hinges
Pivot Hinges for Cabinets
Pivot Door Slides - Flipper Door Slides
Entertainment Center Cabinet Hinges
Small Ball Tip Cabinet Hinge
Tray Hinges - Other Cabinet Hardware
FURNITURE HINGES
Table Hinges - Shelf Hinges
Butler Tray Table Hinge
Finial Tipped Hinges
Desk Hinges - Sewing Machine Hinges
Concealed Hinges - Hidden Hinges
Special Purpose Furniture Hinges
Lift-off Hinges - Loose Joint Hinges
Glass Door Hinges
GATE HINGES AND HARDWARE
Gate Latches - Gate Locks
Bolt, Screw, Strap & Pintle Hinges
Gate Strap Hinges
Gate Tee Hinges
Gate Pivot Hinges
Swimming Pool Gate Hinges - Latches
Gate Spring Hinges
Cane Bolts - Gate Wheels - Gate Closers
Gate Grills -Gate Handles -Gate Pulls -Gate Stops
Solid Bronze Gate Hardware
SPECIALTY HINGES
Small Butt Hinges
Piano Hinges - Continuous Hinges
Soss Hinges & Other Invisible Hinges
Strap Hinge - Dummy Strap Hinges
No Mortise Hinges - Bi-Fold Door Hinge
Tee Hinges
Chest Hinges - Box Hinges - Lid Supports
Garage Door Hinges
Folding Screen Hinges
Refrigerator Hinges - Ice Box Hinges
Weld-on Hinges - Welding Hinges
Shower Door Hinges
SHUTTER & WINDOW
Shutter Hinges, Interior
Shutter Hinges, Exterior
Shutter Dogs, Exterior
Shutter Hardware, Exterior
Window Hinges
Window Hardware
Truth Window Hardware
SCREWS
STAINLESS STEEL HINGES & HARDWARE
Butt, Strap & Tee Hinges, Stainless
Gate Hardware & Hinges, Stainless
Cabinet & Furniture Hardware & Hinges, Stainless
Window & Shutter Hardware & Hinges, Stainless
Industrial Hinges, Stainless
Screws, Stainless Steel
| | |
Recent Customer Feedback:
I have to say that I am not only
impressed by the stock that you
offer but that I am thrilled by the
fact that you have delivered what
I ordered when I asked that it be
delivered. With all of the "big box"
home improvement centers
replacing the older hardware
stores it has become increasingly
tougher to find repair parts. After
surfing your site a bit it is obvious
that you folks are a place that I will
recommend to my buddies for their
cabinet repair and construction
needs. Thanks so much for taking
such excellent care of me. - Joe
How fast and helpful you have
been in helping me, not only to
get info on your product but also
the web site to help me build the
door/bookshelf I wanted to
achieve. Thank you for your quick
and accurate help. -Jill O'Brien
Thank you for the prompt response.
If I can't find 'em, I'll be back for
the bigger hinges and just recut the
doors. Thanks again. Your customer
service makes you stand out from
your competitors. -Dennis Fitch
|
|
|
Home > FURNITURE HINGES > Butler Tray Table Hinge
Butler Tray Table Hinge
Solid Brass Butler Tray Table Hinge
Finishes:
- Polished Brass
- Antique Brass
|
|
Description:
|
|
- Stop holds hinge flat in horizontal position.
- Hinge mortises flush into surface of table.
- Hinge folds up 90 degrees and stops.
- Hinge measures 2-29/32” long x 1-1/2” wide.
- Hinge is 5/64" thick (11/32" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
- Solid brass base material.
- Flat head wood screws are included.
|
|
Butler Tray Hinge, Stainless
Finishes:
|
|
Description:
|
|
- Hinge measures 2” in the open position.
- Hinge is 1-1/2” wide.
- Hinge is 3/64" thick (9/32" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
- Made from Type 304 stainless steel.
- The hinge incorporates a stop which holds the hinge flat in the horizontal position.
- Hinge mortises flush into surface of table.
- Hinge folds back a full 180 degrees onto the table.
- Uses #6 flat head screws (not included). Stainless steel screws are offered for purchase during checkout.
|
|
3-1/4" Butler Tray Hinge, Stainless
Finishes:
|
|
Description:
|
|
- Hinge measures 3-1/4” in the open position.
- Hinge measures 1-3/16” wide.
- Hinge is 1/16" thick (11/32" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
- Made from Type 304 stainless steel.
- Hinge incorporates a stop which holds the hinge flat in the horizontal position.
- Hinge mortises flush into surface of table.
- Hinge folds back a full 180 degrees onto the table.
- Uses #6 flat head screws (not included). Stainless steel screws are offered for purchase during checkout.
|
|
3" Butler Tray Hinge, Stainless
Finishes:
|
|
Description:
|
|
- Hinge measures 3” in the open position.
- Hinge measures 1-1/2” wide.
- Hinge is 1/16" thick (5/16" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
- Made from Type 304 stainless steel.
- Hinge has a stop which holds the hinge flat in the horizontal position.
- Hinge mortises flush into surface of table.
- Hinge folds back a full 180 degrees onto the table.
- Uses #6 flat head screws (not included). Stainless steel screws are offered for purchase during checkout.
|
|
Butler Tray Hinge, Stainless.
Finishes:
|
|
Description:
|
|
- Hinge measures 3” in the open position.
- Hinge measures 1-1/2” wide.
- Hinge is 1/16" thick (11/32" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
- Made from Type 304 stainless steel.
- Hinge has a stop which holds the hinge flat in the horizontal position.
- Hinge mortises flush into surface of table.
- Hinge folds back a full 180 degrees onto the table.
- Uses #8 flat head screws (not included). Stainless steel screws are offered for purchase during checkout.
|
|
Butler Tray Table Hinge
Finishes:
|
|
Description:
|
|
- Stop holds hinge flat in horizontal position.
- Hinge mortises flush into surface of table.
- Hinge folds back a full 180 degrees onto the table.
- Rounded corners.
- Hinge measures 2-3/4” long x 1-37/64” wide.
- Hinge is 5/64" thick (5/16" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
- Solid brass base material.
- Flat head screws (#6 x 5/8”) are included.
|
|
Butler Tray Table Hinge, Solid Brass
Finishes:
|
|
Description:
|
|
- Hinge is an English reproduction.
- Locks open in flat position.
- Holds vertical at 90 degrees.
- Square ends.
- Hinge measures 2-1/2” long x 1-1/2” wide.
- Hinge is 1/8" thick (3/8" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
- Solid brass base material.
- Uses #6 flat head screws (not included). Flat head brass screws are offered for purchase during checkout.
|
|
Butler Tray Table Hinge, Satin Brass
Finishes:
|
|
Description:
|
|
- Hinge is an English reproduction.
- Locks open in flat position.
- Holds vertically at 90 degrees.
- Round ends.
- Hinge measures 3” long x 1-1/2” wide.
- Hinge is 5/32" thick (11/32" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
- Solid brass base material.
- Uses #6 flat head screws (not included). Flat head brass wood screws are offered for purchase during checkout.
|
|
Butler Tray Table Hinge, Antique Brass
Finishes:
|
|
Description:
|
|
- Measures 2-1/2" by 1-1/2".
- Hinge is 1/8" thick (5/16" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
- Solid brass base material.
- Spring loaded stop at 90 degrees.
- Screws are included.
|
|
2-3/4" Butler Tray Table Hinge.
Finishes:
|
|
Description:
|
|
- Stop holds hinge flat in horizontal position.
- Hinge mortises flush into surface of table.
- Hinge folds back a full 180 degrees onto the table.
- Round ends.
- Hinge measures 2-3/4” long x 1-3/16” wide.
- Hinge is 5/64" thick (5/16" at the thickest point). Thickest point measurement is taken with the hinge in its flat position.
- Solid brass base material.
- Flat head screws (#6 x 5/8”) are included
|
|
Butler Table Hinge, Narrow
Finishes:
- Polished Brass
- Polished Chrome
|
|
Description:
|
|
- Butler tray table hinge with narrow dimension.
- Hinge measures 2-1/2" by 1/2". The hinge is 11/32" thick at its thickest point. The hinge leafs are 3/32" thick.
- Made from solid brass.
- Uses #5 or #6 flat head screws. #5 is the best choice and #6 is acceptable if #5 is not available. Screws are not included but are offered for puchase during checkout.
- These hinges are sold by the pair. A pair of hinges is what is needed to hinge one table leaf.
|
|
|
|
|
