| |
|
 | | |
- - WHAT IS A PAIR OF HINGES?
DOOR HINGES
Baldwin Hinges
Plain Bearing Butt Hinges
Ball Bearing Butt Hinges
Spring Hinges - Double Acting Hinges
Pivot Hinges - Pivot Sets
Screen Door Hinges - Screen Door Locks
Wide Throw Hinges - Swing Clear Hinges
Special Purpose Hinges
Invisible Hinges and Soss Hinges
Door Hardware
CABINET HINGES
Semi Concealed Cabinet Hinges
Surface Mounted Cabinet Hinges
Overlay Hinges - Inset Hinges
Demountable Hinges
Youngdale Hinges
European Hinges - Blum Hinges
Pivot Hinges for Cabinets
Pivot Door Slides - Flipper Door Slides
Entertainment Center Cabinet Hinges
Small Ball Tip Cabinet Hinge
Tray Hinges - Other Cabinet Hardware
FURNITURE HINGES
Table Hinges - Shelf Hinges
Butler Tray Table Hinge
Finial Tipped Hinges
Desk Hinges - Sewing Machine Hinges
Concealed Hinges - Hidden Hinges
Special Purpose Furniture Hinges
Lift-off Hinges - Loose Joint Hinges
Glass Door Hinges
GATE HINGES AND HARDWARE
Gate Latches - Gate Locks
Bolt, Screw, Strap & Pintle Hinges
Gate Strap Hinges
Gate Tee Hinges
Gate Pivot Hinges
Swimming Pool Gate Hinges - Latches
Gate Spring Hinges
Cane Bolts - Gate Wheels - Gate Closers
Gate Grills -Gate Handles -Gate Pulls -Gate Stops
Solid Bronze Gate Hardware
SPECIALTY HINGES
Small Butt Hinges
Piano Hinges - Continuous Hinges
Soss Hinges & Other Invisible Hinges
Strap Hinge - Dummy Strap Hinges
No Mortise Hinges - Bi-Fold Door Hinge
Tee Hinges
Chest Hinges - Box Hinges - Lid Supports
Garage Door Hinges
Folding Screen Hinges
Refrigerator Hinges - Ice Box Hinges
Weld-on Hinges - Welding Hinges
Shower Door Hinges
SHUTTER & WINDOW
Shutter Hinges, Interior
Shutter Hinges, Exterior
Shutter Dogs, Exterior
Shutter Hardware, Exterior
Window Hinges
Window Hardware
Truth Window Hardware
SCREWS
STAINLESS STEEL HINGES & HARDWARE
Butt, Strap & Tee Hinges, Stainless
Gate Hardware & Hinges, Stainless
Cabinet & Furniture Hardware & Hinges, Stainless
Window & Shutter Hardware & Hinges, Stainless
Industrial Hinges, Stainless
Screws, Stainless Steel
| | |
Recent Customer Feedback:
I have to say that I am not only
impressed by the stock that you
offer but that I am thrilled by the
fact that you have delivered what
I ordered when I asked that it be
delivered. With all of the "big box"
home improvement centers
replacing the older hardware
stores it has become increasingly
tougher to find repair parts. After
surfing your site a bit it is obvious
that you folks are a place that I will
recommend to my buddies for their
cabinet repair and construction
needs. Thanks so much for taking
such excellent care of me. - Joe
How fast and helpful you have
been in helping me, not only to
get info on your product but also
the web site to help me build the
door/bookshelf I wanted to
achieve. Thank you for your quick
and accurate help. -Jill O'Brien
Thank you for the prompt response.
If I can't find 'em, I'll be back for
the bigger hinges and just recut the
doors. Thanks again. Your customer
service makes you stand out from
your competitors. -Dennis Fitch
|
|
|
Home > SHUTTER & WINDOW > Shutter Hinges, Exterior
Shutter Hinges, Exterior
Shutter Hinge, Swing Clear
Finishes:
- Black wrought iron finish
|
|
Description:
|
|
- Hinge is made with a curved offset to throw the shutter clear of the window when shutter is opened
- hinge is reversible for installation on right or left side of window
- this hinge is made for shutters that are 1 inch or thicker.
- loose pin
- made of steel base material
- screws are included
|
|
Shutter Strap Hinge, 1/2" Offset
Finishes:
|
|
Description:
|
|
- These shutter strap hinges are for "inset" shutters. Shutters are installed flush with the window frame when in the closed position (covering the window).
- The offset is 1/2" which gives a throw of 1". This allows the shutter to lay flat against the house when in the open position if the siding material extends 1" or less from the window frame.
- Shutter strap size is available in 4 lengths. Shutter strap measures 1-3/4" wide at the widest point. Strap is made from 12 Ga. steel.
- Pintle plate measures 1-1/2" by 3-1/2" by 1/8". Pintle diameter is 3/8".
- Shutter may be lifted off of pintles after installation.
- Hinge and pintle are zinc chromate plated for corrosion resistance and then finished in wrought iron black for a traditional look.
- Matching wood screws are included.
- Sold by the pair. A pair will hang one shutter.
|
|
Shutter Strap Hinge, 1-1/2" Offset
Finishes:
|
|
Description:
|
|
- These shutter strap hinges are for "inset" shutters. Shutters are installed flush with the window frame when in the closed position (covering the window).
- The offset is 1-1/2" which gives a throw of 3". This allows the shutter to lay flat against the house when in the open position if the siding material extends 3" or less from the window frame.
- Shutter strap size is available in 4 lengths. Shutter strap measures 1-3/4" wide at the widest point. Strap is made from 12 Ga. steel.
- Pintle plate measures 1-1/2" by 3-1/2" by 1/8". Pintle diameter is 3/8".
- Shutter may be lifted off of pintles after installation.
- Hinge and pintle are zinc chromate plated for corrosion resistance and then finished in wrought iron black for a traditional look.
- Matching wood screws are included.
- Sold by the pair. A pair will hang one shutter.
|
|
Shutter Strap Hinge, 2-1/4" Offset
Finishes:
|
|
Description:
|
|
- These shutter strap hinges are for "inset" shutters. Shutters are installed flush with the window frame when in the closed position (covering the window).
- The offset is 2-1/4" which gives a throw of 4-1/2". This allows the shutter to lay flat against the house when in the open position if the siding material extends 4-1/2" or less from the window frame.
- Shutter strap size is available in 4 lengths. Shutter strap measures 1-3/4" wide at the widest point. Strap is made from 12 Ga. steel.
- Pintle plate measures 1-1/2" by 3-1/2" by 1/8". Pintle diameter is 3/8".
- Shutter may be lifted off of pintles after installation.
- Hinge and pintle are zinc chromate plated for corrosion resistance and then finished in wrought iron black for a traditional look.
- Matching wood screws are included.
- Sold by the pair. A pair will hang one shutter.
|
|
Shutter Strap Hinge, 3-1/4" Offset
Finishes:
|
|
Description:
|
|
- These shutter strap hinges are for "inset" shutters. Shutters are installed flush with the window frame when in the closed position (covering the window).
- The offset is 3-1/4" which gives a throw of 6-1/2". This allows the shutter to lay flat against the house when in the open position if the siding material extends 6-1/2" or less from the window frame.
- Shutter strap size is available in 4 lengths. Shutter strap measures 1-3/4" wide at the widest point. Strap is made from 12 Ga. steel.
- Pintle plate measures 1-1/2" by 3-1/2" by 1/8". Pintle diameter is 3/8".
- Shutter may be lifted off of pintles after installation.
- Hinge and pintle are zinc chromate plated for corrosion resistance and then finished in wrought iron black for a traditional look.
- Matching wood screws are included.
- Sold by the pair. A pair will hang one shutter.
|
|
Cast Iron Shutter Hinges, Full Mortise
Finishes:
|
|
Description:
|
|
- These shutter hinges are used for full mortise installation. One leaf of the hinge is mortised into the edge of the shutter and the other leaf is mortised into the window casement.
- Click on first two links below for installation illustrations
- Choose a hinge that gives you the proper clearance away from the window casement. The "Throw" of the hinge determines this clearance.
- Cast iron base materials
- Once installed shutters may be lifted off without removing the hinges.
- When shutter is closed the hinge is designed to keep it from being lifted off by the wind.
- Mounting screw sizes are listed below but are not included
- Cast iron base material
- A set includes 4 hinges which is enough to hang 2 shutters.
- A set also includes 2 shutter fasteners which can be used to hold shutters closed if the shutter has a wooden windowsill. Click on third link below for photo of shutter fastener.
|
|
Cast Iron Shutter Hinges, Surface Mounted
Finishes:
|
|
Description:
|
|
- These shutter hinges are used for surface mounted installations.
- Allows shutter to "lift off" for cleaning or painting
- Cast iron material ready for painting
- Uses #10 flat head screws (not included)
- These shutter hinges are sold by the set. A set is 4 hinges (enough for 2 shutters)
- NOTE: two sets of shutter fasteners are included with SKU 924000. Click on 2nd link below for photo. Shutter fasteners are not included with SKU 738016.
- For explanation of "Throw" click on link below.
|
|
Shutter Hinge, New York Style, 1-1/4" Offset
Finishes:
|
|
Description:
|
|
- This hinge is for shutters hung flush with the casing (full inset)
- Hinge measures 4-1/4" vertical and 5" horizontal. Width is 1". Pintle plate is 3-1/8" by 1-1/8"
- 1-1/4" Offset for Wood Frame Construction
- "Throw" dimension is 2-1/2". Click on link below for throw diagram.
- Loose joint hinges permit easy hanging and removal of shutters
- Made from steel base material
- Matching wood screws are included.
- This product is sold by the set. A set is 4 hinges, enough to do 2 shutters.
|
|
Shutter Hinge, New York Style, 1-1/16" Offset
Finishes:
|
|
Description:
|
|
- This hinge is for shutters or blinds hung flush with the casing (full inset)
- Hinge measures 4-1/4" vertical and 5" horizontal. Pintle plate is 2" tall by 1-1/8" wide.
- 1-1/16" Offset for Wood frame construction.
- Throw dimension is 2-1/16". Click on link below for throw diagram.
- Loose joint hinges permit easy hanging and removal of shutters.
- Wood screws are included.
- This product is sold by the pair. A pair is enough to hang one shutter.
|
|
Shutter Hinge, New York Style, 2-1/4" Offset
Finishes:
|
|
Description:
|
|
- This hinge is for shutters hung flush with the casing (full inset)
- Hinge measures 4-1/4" vertical and 5" horizontal. Width is 1'. Pintle plate is 3-1/8" by 1-1/8".
- 2-1/4" Offset for Brick Construction
- "Throw" dimension is 4-1/2". Click on link below for throw diagram.
- Loose joint hinges permit easy hanging and removal of shutters.
- Made from steel base material.
- This product is sold by the set. A set is 4 hinges, enough to do 2 shutters.
- Matching wood screws are included.
|
|
Shutter Hinge, New York Style, 2-1/8" Offset
Finishes:
|
|
Description:
|
|
- This hinge is for shutters or blinds hung flush with the casing (full inset)
- Hinge measures 4-1/4" vertical and 5" horizontal. Pintle plate is 2" tall by 1-1/8" wide.
- 2-1/8" Offset for Brick construction.
- Throw dimension is 4-1/8". Click on link below for throw diagram.
- Loose joint hinges permit easy hanging and removal of shutters.
- Wood screws are included.
- This product is sold by the pair. A pair is enough to hang one shutter.
|
|
Stainless Steel Connecticut Style Shutter Hinge, Offset
Finishes:
|
|
Description:
|
|
- Smooth black stainless steel strap with pintle
- Strap measures 1" by 4-1/4" with either a 2-3/16" offset or a 1-1/4" offset.
- Pintle is 4-1/2" long by 7/16" diameter thread.
- Matching black stainless steel wood screws are included
- Loose joint hinges permit easy hanging and removal of shutters
- For use where shutters cover windows that are recessed into brick or stone you would normally use the 2-3/16" offset model.
- For use where shutters cover windows that are recessed into a wood frame you would normally use the 1-1/4"" offset model.
- Offset of hinge allows shutter to open 180 degrees
- Made from stainless steel base material
- This product is sold by the set. A set is 4 hinges, enough to do 2 shutters.
- If you need a lag anchor for this product for a masonary installation, order our SKU 244130. It is a 1/2" diameter lag anchor (in the long version) but it will work for the 7/16" diameter thread on the pintle.It is offered for purchase during checkout.
|
|
Stainless Steel Connecticut Style Shutter Hinge
Finishes:
|
|
Description:
|
|
- This surface mounted shutter hinge is used where the blind or shutter is flush with the casing. For use in frame or masonry construction.
- Smooth stainless steel strap with pintle
- Loose joint hinges permit easy hanging and removal of shutters
- Made from stainless steel base material
- This product is sold by the set. A set is 4 hinges, enough to do 2 shutters.
- Matching black stainless steel screws are included
- A pair of these shutter hinges is designed to hang a shutter of up to 20lbs. For shutters taller than 60" a third center hinge may be required.
- For masonry installation use lag type anchors.
|
|
Galvanized Steel Connecticut Style Shutter Hinge
Finishes:
|
|
Description:
|
|
- This surface mounted shutter hinge is used where the blind or shutter is flush with the casing. For use in frame or masonry construction.
- Steel base material, galvanized for corrosion protection.
- Loose joint hinges permit easy hanging and removal of shutters
- This product is sold by the set. A set is 4 hinges, enough to do 2 shutters.
- Wood screws are included
- A pair of these shutter hinges is designed to hang a shutter of up to 20lbs. For shutters taller than 60" a third center hinge may be required.
- For masonry installation use "5/16 short" lag type anchors.
|
|
12" Antique Style Shutter Hinges
Finishes:
|
|
Description:
|
|
- Antique style shutter hinge made for surface mounting.
- Strap leaf measures 12-1/4" by 2-3/4" at widest point.
- Vertical leaf measures 5-1/4" by 1-3/8".
- Width measurements are to center of hinge pin.
- Hinges are weight rated at 15 lbs per hinge.
- Made from steel base material. Matching wood screws are included.
|
|
11-3/4" Antique Style Shutter Hinge
Finishes:
|
|
Description:
|
|
- Antique style shutter hinge made for surface mounting (shutter and frame are flush with each other).
- Strap leaf measures 11-3/4" by 2-3/8" at widest point.
- Vertical leaf measures 4-5/16" by 1-1/8".
- Measurements are to center of hinge pin.
- Hinges are weight rated at 15 lbs. per hinge.
- Made from steel base material. Matching wood screws are included.
|
|
"L" Type Shutter Hinges
Finishes:
|
|
Description:
|
|
- These shutter hinges are for "inset" shutters. Inset shutters are installed flush with the window frame when in the closed position (covering the window).
- The hinges are available in 3 different offsets (1/2",1-1/2" and 2-1/4") . The offset gives a "throw" which allows the shutter to lay flat against the house when in the open position.
- The "throw" is approximately double the offset. For example a hinge with a 1/2" offset has about 1" of throw.
- Pintle plate measures 1-1/2" by 3-1/2" by 1/8". Pintle diameter is 3/8".
- "L" strap measures 1-3/8" wide at widest point. Vertical part of the "L" is 5". Horizontal part of the "L" is 6".
- Shutter may be lifted off of pintles after installation.
- Hinge and pintle are zinc chromate plated for corrosion resistance and then finished in wrought iron black for a traditional look.
- Matching wood screws are included.
- For taller shutters consider using our "Middle" shutter hinges.
- Sold by the pair. A pair will hang one shutter.
|
|
Middle Shutter Hinges
Finishes:
|
|
Description:
|
|
- "Middle" shutter hinges are used with our "L Type" shutter hinges as a middle hinge. They are typically used with taller shutters to keep the shutter in alignment, to help keep the shutter from warping and to give the shutter a more decorative look.
- These shutter hinges are for "inset" shutters. Inset shutters are installed flush with the window frame when in the closed position (covering the window).
- The hinges are available in 3 different offsets (1/2",1-1/2" and 2-1/4") . The offset gives a "throw" which allows the shutter to lay flat against the house when in the open position.
- The "throw" is approximately double the offset. For example a hinge with a 1/2" offset has about 1" of throw.
- Pintle plate measures 1-1/2" by 3-3/4" by 1/8". Pintle diameter is 3/8".
- Vertical strap measures 1-3/8" wide and 7" tall.
- Shutter may be lifted off of pintles after installation.
- Hinge and pintle are zinc chromate plated for corrosion resistance and then finished in wrought iron black for a traditional look.
- Matching wood screws are included.
- Sold by the pair. Order a pair to add "Middle" hinges to two shutters.
|
|
|
|
|
