| |
|
 | | |
- - WHAT IS A PAIR OF HINGES?
DOOR HINGES
Baldwin Hinges
Plain Bearing Butt Hinges
Ball Bearing Butt Hinges
Spring Hinges - Double Acting Hinges
Pivot Hinges - Pivot Sets
Screen Door Hinges - Screen Door Locks
Wide Throw Hinges - Swing Clear Hinges
Special Purpose Hinges
Invisible Hinges and Soss Hinges
Door Hardware
CABINET HINGES
Semi Concealed Cabinet Hinges
Surface Mounted Cabinet Hinges
Overlay Hinges - Inset Hinges
Demountable Hinges
Youngdale Hinges
European Hinges - Blum Hinges
Pivot Hinges for Cabinets
Pivot Door Slides - Flipper Door Slides
Entertainment Center Cabinet Hinges
Small Ball Tip Cabinet Hinge
Tray Hinges - Other Cabinet Hardware
FURNITURE HINGES
Table Hinges - Shelf Hinges
Butler Tray Table Hinge
Finial Tipped Hinges
Desk Hinges - Sewing Machine Hinges
Concealed Hinges - Hidden Hinges
Special Purpose Furniture Hinges
Lift-off Hinges - Loose Joint Hinges
Glass Door Hinges
GATE HINGES AND HARDWARE
Gate Latches - Gate Locks
Bolt, Screw, Strap & Pintle Hinges
Gate Strap Hinges
Gate Tee Hinges
Gate Pivot Hinges
Swimming Pool Gate Hinges - Latches
Gate Spring Hinges
Cane Bolts - Gate Wheels - Gate Closers
Gate Grills -Gate Handles -Gate Pulls -Gate Stops
Solid Bronze Gate Hardware
SPECIALTY HINGES
Small Butt Hinges
Piano Hinges - Continuous Hinges
Soss Hinges & Other Invisible Hinges
Strap Hinge - Dummy Strap Hinges
No Mortise Hinges - Bi-Fold Door Hinge
Tee Hinges
Chest Hinges - Box Hinges - Lid Supports
Garage Door Hinges
Folding Screen Hinges
Refrigerator Hinges - Ice Box Hinges
Weld-on Hinges - Welding Hinges
Shower Door Hinges
SHUTTER & WINDOW
Shutter Hinges, Interior
Shutter Hinges, Exterior
Shutter Dogs, Exterior
Shutter Hardware, Exterior
Window Hinges
Window Hardware
Truth Window Hardware
SCREWS
STAINLESS STEEL HINGES & HARDWARE
Butt, Strap & Tee Hinges, Stainless
Gate Hardware & Hinges, Stainless
Cabinet & Furniture Hardware & Hinges, Stainless
Window & Shutter Hardware & Hinges, Stainless
Industrial Hinges, Stainless
Screws, Stainless Steel
| | |
Recent Customer Feedback:
I have to say that I am not only
impressed by the stock that you
offer but that I am thrilled by the
fact that you have delivered what
I ordered when I asked that it be
delivered. With all of the "big box"
home improvement centers
replacing the older hardware
stores it has become increasingly
tougher to find repair parts. After
surfing your site a bit it is obvious
that you folks are a place that I will
recommend to my buddies for their
cabinet repair and construction
needs. Thanks so much for taking
such excellent care of me. - Joe
How fast and helpful you have
been in helping me, not only to
get info on your product but also
the web site to help me build the
door/bookshelf I wanted to
achieve. Thank you for your quick
and accurate help. -Jill O'Brien
Thank you for the prompt response.
If I can't find 'em, I'll be back for
the bigger hinges and just recut the
doors. Thanks again. Your customer
service makes you stand out from
your competitors. -Dennis Fitch
|
|
|
Home > GATE HINGES AND HARDWARE > Bolt, Screw, Strap & Pintle Hinges
Bolt, Screw, Strap & Pintle Hinges
Pintle Type Strap Hinges with Wood Screws-
Finishes:
|
|
Description:
|
|
- Heart style strap hinge with a pintle end
- Pintle end fastens to wood or masonry (with masonry anchor not included)
- Comes complete with black square head wood screws
- This hinge can be used on a gate weighing up to 175lbs (per pair of hinges).
- Pintle style mounting allows gate to be removed by lifting off pintle
- With "pintle style mounting" your gate can be installed so it can swing both ways (in and out) or it can be installed so that it opens only one way (either in or out).
- Normal installation requires two hinges per gate
- "Hook Size" refers to the dimensions of the threaded portion.
|
|
Pintle Type Strap Hinges with Carriage Bolts-
Finishes:
|
|
Description:
|
|
- Heart style strap hinge with a pintle end that fastens to wood or masonry (with masonry anchor, not included)
- This strap hinge is for heavy duty use. It can be used on a gate weighing up to 250lbs (per pair of hinges). Comes complete with 3 black carriage bolts (plus nuts and washers) and a black square head wood screw
- Pintle style mounting allows gate to be removed by lifting off pintle
- With "pintle style mounting" your gate can be installed so it can swing both ways (in and out) or it can be installed so that it opens only one way (either in or out).
- Normal installation requires two hinges per gate
- "Hook Size" refers to the dimensions of the threaded portion. "Screw Size" refers to the carriage bolt dimensions.
|
|
Heavy Duty J-Bolt Pivot Hinge-
Finishes:
|
|
Description:
|
|
- This is a very heavy duty hinge specially made for heavy gates and doors
- This hinge will swing a full 180 degrees if installed without a stop
- Hinge is made up of a mounting plate (flange) and J-Bolt arm
- Hinge pivots on a steel ball bearing and includes a grease fitting to keep the bearing lubricated
- Mounts with 3/8" lag screws or bolts (not included)
- The minimum gap between the post and edge of gate frame is 1-7/8" for SKU 783000 and 2-1/2" for SKU 783002.
- The maximum spread between the two nuts on the threaded part is as follows; for the 783000 it is 3", for the 783002 it is 4".
- The thread size on our SKU 783000 is 5/8 x 11. The thread size on our SKU 783002is 3/4 x 10.
- Weight rating is for 2 hinges
|
|
Bean Style Pintle Strap Hinge
Finishes:
|
|
Description:
|
|
- Bean style strap hinge with a pintle end
- Pintle end fastens to wood or masonry (with masonry anchor not included)
- Comes complete with black wood screws to attach to gate side
- This hinge can be used on a gate weighing up to 175lbs (per pair of hinges).
- Pintle style mounting allows gate to be removed by lifting off pintle
- With "pintle style mounting" your gate can be installed so it can swing both ways (in and out) or it can be installed so that it opens only one way (either in or out).
- Normal installation requires two hinges per gate
- "Hook Size" refers to the dimensions of the threaded portion.
- Be sure to see our section "OTHER GATE ITEMS" for gate latches, handles and cane bolts in the same style
|
|
Bean Style Strap Hinge with Carriage Bolts
Finishes:
|
|
Description:
|
|
- Bean style strap hinge with a pintle end that fastens to wood or masonry (with masonry anchor, not included).
- This strap hinge is for heavy duty use. It can be used on a gate weighing up to 250lbs (per pair of hinges). Comes complete with 3 black carriage bolts (plus nuts and washers) and a black square head wood screw.
- Pintle style mounting allows gate to be removed by lifting off pintle.
- With "pintle style mounting" your gate can be installed so it can swing both ways (in and out) or it can be installed so that it opens only one way (either in or out).
- Normal installation requires two hinges per gate.
- "Hook Size" refers to the dimensions of the threaded portion. "Screw Size" refers to the carriage bolt dimensions.
|
|
Ornamental Heavy Duty Strap Hinge And Screw Hook
|
|
Description:
|
|
- durable black finish and steel base material
- decorative style
- complete with lag screws
|
|
Ornamental Strap Hinge And Screw Hook
|
|
Description:
|
|
- durable black finish and steel base material
- decorative style
- complete with lag screws
|
|
Screw Hook & Eye Hinge
Finishes:
|
|
Description:
|
|
- This hinge is made up of two parts: a "pintle" side and an "eye".
- Made from malleable iron.
- Hinge can be installed in masonry by using a masonry anchor.
- SKU 504860 measures 8.5" tip-to-tip as shown in the photo to the left. The eye size and pintle diameter is 1/2". The screw is a 5/8" screw.
- SKU 504861 measures 10.25" tip-to-tip as shown in the photo to the left. The eye size and pintle diameter is 5/8". The screw is a 3/4" screw.
- These hinges are sold by the pair. A pair is two sets of hinges which is usually enough to hang one gate or door.
- The weight rating listed is per pair of hinges.
|
|
Bolt & Strap Hinge
Finishes:
|
|
Description:
|
|
- The "bolt" and "strap" for this hinge are ordered as separate components.
- When ordering components make sure that the "pintle" sizes match. The pintle sizes available for these components are 1/2", 5/8", 3/4" and 7/8".
- Maximum post sizes(maximum distance between the washers) for the "Bolt" are as follows; SKU 504820 is 4-5/8", SKU 504821 is 6-1/2", 504822 is 10-1/4", 504823 is 7-7/8", 504824 is 10" and 504825 is 9-7/8".
- The weight ratings listed are for one hinge. For example, if the listed weight rating is 100 lbs. and you install 2 hinges, your 2 hinges would be rated at 200 lbs.
- One hinge consists of one "strap" and one "bolt". You would normally order 2 straps and 2 bolts to hang one gate or door.
- The "straps" are normally installed using carriage bolts (not included).
- Two washers and two nuts are included with each "bolt" ordered.
|
|
Screw Hook And Strap Hinge
Finishes:
|
|
Description:
|
|
- The Screw Hook and Strap Hinges found in this section are only available in smaller sizes and are sold by the pair.
- A pair is two complete hinges. A pair is what is normally required to hang one gate or door.
- For surface mounted doors.
- Heavy duty steel strap pivots on post of a malleable iron screw hook.
- Uses 5/16” carriage bolts for the strap (not included)
- For a selection of larger Screw Hook and Strap Hinges click on the link below.
|
|
Screw & Strap Hinge
Finishes:
|
|
Description:
|
|
- The "screw" and "strap" for this hinge are ordered as separate components.
- When ordering components make sure that the "pintle" sizes match. The pintle sizes available for these components are 1/2", 5/8", 3/4" and 7/8".
- The weight ratings listed are for one hinge. For example, if the listed weight rating is 100 lbs. and you install 2 hinges, your 2 hinges would be rated at 200 lbs.
- One hinge consists of one "strap" and one "screw". You would normally order 2 straps and 2 bolts to hang one gate or door.
- The "straps" are normally installed using carriage bolts (not included).
- Steel base material
|
|
Screw Eye and Pintle Hinge
Finishes:
|
|
Description:
|
|
- The "Screw Eye" and "Screw Pintle" for this hinge are ordered as separate components.
- When ordering components make sure that the "pintle" sizes match. The pintle sizes available for these components are 1/2" (Small) and 5/8" (Large).
- The weight ratings listed are for one hinge. For example, if the listed weight rating is 100 lbs. and you install 2 hinges, your 2 hinges would be rated at 200 lbs.
- One hinge consists of one "Screw Eye" and one "Screw Pintle". You would normally order 2 screw eyes and 2 screw pintles to hang one gate or door.
|
|
Upright Pintle & Strap Hinge
Finishes:
|
|
Description:
|
|
- Upright pintle mounts to gate post and strap mounts to gate.
- The "Upright" and the "Strap" are ordered as separate components.
- When ordering components make sure that the pintle sizes match. The pintle sizes available for these components are 1/2" and 5/8".
- The weight ratings listed are for one hinge. For example if the listed weight rating is 100 lbs. and you install 2 hinges, your 2 hinges would be rated for a 200lb gate.
- Components install with lag screws or carriage bolts (not included).
- The design of this product creates a small gap between the post and gate (approximately 3/8") after installation.
|
|
Upright Pintle for Pintle System of Gate Hinges
Finishes:
|
|
Description:
|
|
- The Upright Pintle is part of our pintle system of gate hinges.
- This product will work with a strap or screw eye.
- When ordering the other part of this hinge make sure that the pintle sizes match. For example if you order an upright pintle with a 5/8" pintle your bolt must have a 5/8" pintle.
- Made from steel base material.
- Both the 1/2" and 5/8" Upright pintle use 2 each 3/8" lag screws per upright (not included).
- The weight ratings listed are for one hinge. For example if the listed weight rating is 100 lbs and you use two hinges then your two hinges would be rated at 200 lbs.
|
|
Strap for Pintle System of Gate Hinges
Finishes:
|
|
Description:
|
|
- These straps are part of our pintle system of gate hinges.
- This product will work with the Upright Pintle, Bolt Pintle or Screw Pintle.
- When ordering the other part of this hinge make sure that the pintle sizes match. For example if you order a strap with a 5/8" pintle and bolt pintle to go with it your bolt pintle must have a 5/8" pintle also.
- Made from steel base material.
- Straps install with either lag screws or carriage bolts (not included).
- The weight ratings listed are for one hinge. For example if the listed weight rating is 100 lbs and you use two hinges then your two hinges would be rated at 200 lbs.
|
|
Bolt Pintle for Pintle System of Gate Hinges
Finishes:
|
|
Description:
|
|
- These bolt pintles are part of our pintle system of gate hinges.
- This product will work with the Strap or Screw eye.
- Maximum post sizes(maximum distance between the washers) for the "Bolt" are as follows; SKU 504820 is 4-5/8", SKU 504821 is 6-1/2", 504822 is 10-1/4", 504823 is 7-7/8", 504824 is 10" and 504825 is 9-7/8".
- When ordering the other part of this hinge make sure that the pintle sizes match. For example if you order a strap with a 5/8" pintle and bolt pintle to go with it your bolt pintle must have a 5/8" pintle also.
- Made from steel base material.
- The weight ratings listed are for one hinge. For example if the listed weight rating is 100 lbs and you use two hinges then your two hinges would be rated at 200 lbs.
|
|
Screw Eye for Pintle System of Gate Hinges
Finishes:
|
|
Description:
|
|
- These Screw Eyes are part of our pintle system of gate hinges.
- This product will work with a Screw Pintle, an Upright Pintle, or a Bolt Pintle.
- SKU 504862 fits a 1/2" Pintle, is 4-5/8" long overall and has a 1/2" diameter screw thread.
- SKU 504863 fits a 5/8" pintle, is 5-5/8" long overall and has a 5/8" diameter screw thread.
- Made from steel base material.
- When ordering the other part of this hinge make sure that the pintle sizes match.
|
|
Upright Pintle and Screw Eye
Finishes:
|
|
Description:
|
|
- Upright pintle mounts to gate post and screw eye mounts to gate. Or it can be mounted upside down with the screw eye going into the post and the upright pintle mounting to the gate.
- The "Upright" and the "Screw Eye" are ordered as separate components.
- When ordering components make sure that the pintle sizes match. The pintle sizes available for these components are 1/2" and 5/8".
- The weight ratings listed are for one hinge. For example if the listed weight rating is 100 lbs. and you install 2 hinges, your 2 hinges would be rated for a 200lb gate.
- Upright Pintle installs with lag screws or carriage bolts (not included).
- Made from steel base material.
|
|
Screw Pintle for Pintle System of Gate Hinges
Finishes:
|
|
Description:
|
|
- The Screw Pintle is part of our pintle system of gate hinges.
- This product will work with a strap or screw eye (sold separately).
- When ordering the other part of this hinge make sure that the pintle sizes match. For example if you order an screw pintle with a 5/8" pintle your strap must have a 5/8" pintle also.
- Made from steel base material.
- The weight ratings listed are for one hinge. For example if the listed weight rating is 100 lbs and you use two hinges then your two hinges would be rated at 200 lbs.
|
|
Pipe Mounted Pintle Hinge
Finishes:
|
|
Description:
|
|
- The pipe hinge is part of our pintle system of gate hinges.
- This product will work with a screw pintle, bolt pintle or upright pintle. All are sold separately.
- When ordering the other part of this hinge make sure that the pintle sizes match. For example if you order a Pipe Mounted Pintle Hinge with a 5/8" pintle make sure the other component has a 5/8" pintle size also.
- Made from steel base material.
- There are two models; one model fits a 1-5/8" diameter pipe and the other model fits a 2" diameter pipe (dimensions listed are actual outside diameter measurements of pipe or tubing).
- The weight ratings listed are for one hinge. For example, if the listed weight rating is 70lbs for one hinge and you use two hinges then your combined hinge installation would be rated at 140lbs.
|
|
Pintle Hinge for Livestock Gates, Medium
Finishes:
|
|
Description:
|
|
- Medium duty livestock gate hinge for use on 1-3/4"" (outside diameter) round tube gates.
- Pintle side of hinge uses a "lag screw" thread to attach to the gate post with a 6.5" long bolt (11/16" diameter). Threaded portion of lag screw pintle is 4.5" so the minimum post width should be at least 4.5". Pintle size is 5/8" x 2".
- Carriage bolts, nuts, and washers are included to attach brackets to round gate post.
- These hinges are sold by the pair. A pair is usually what is required to hang one gate.
- PLEASE NOTE: the green tubing and wooden post shown in the photo are for illustrative purposes and are not included with the hinge.
|
|
Pintle Hinge for Livestock Gates, Large
Finishes:
|
|
Description:
|
|
- Heavy duty livestock gate hinge for use on 2" (outside diameter) round tube gates.
- Pintle side of hinge "through-bolts" to the gate post with a 12.5" long bolt (3/4" diameter). Maximum post size is 9.5" in width. Pintle size is 7/8" x 2".
- Carriage bolts, nuts, and washers are included.
- These hinges are sold by the pair. A pair is usually what is required to hang one gate.
- PLEASE NOTE: the green tubing and wooden post shown in the photo are for illustrative purposes and are not included with the hinge.
|
|
|
|
|
