| |
|
 | | |
- - WHAT IS A PAIR OF HINGES?
DOOR HINGES
Baldwin Hinges
Plain Bearing Butt Hinges
Ball Bearing Butt Hinges
Spring Hinges - Double Acting Hinges
Pivot Hinges - Pivot Sets
Screen Door Hinges - Screen Door Locks
Wide Throw Hinges - Swing Clear Hinges
Special Purpose Hinges
Invisible Hinges and Soss Hinges
Door Hardware
CABINET HINGES
Semi Concealed Cabinet Hinges
Surface Mounted Cabinet Hinges
Overlay Hinges - Inset Hinges
Demountable Hinges
Youngdale Hinges
European Hinges - Blum Hinges
Pivot Hinges for Cabinets
Pivot Door Slides - Flipper Door Slides
Entertainment Center Cabinet Hinges
Small Ball Tip Cabinet Hinge
Tray Hinges - Other Cabinet Hardware
FURNITURE HINGES
Table Hinges - Shelf Hinges
Butler Tray Table Hinge
Finial Tipped Hinges
Desk Hinges - Sewing Machine Hinges
Concealed Hinges - Hidden Hinges
Special Purpose Furniture Hinges
Lift-off Hinges - Loose Joint Hinges
Glass Door Hinges
GATE HINGES AND HARDWARE
Gate Latches - Gate Locks
Bolt, Screw, Strap & Pintle Hinges
Gate Strap Hinges
Gate Tee Hinges
Gate Pivot Hinges
Swimming Pool Gate Hinges - Latches
Gate Spring Hinges
Cane Bolts - Gate Wheels - Gate Closers
Gate Grills -Gate Handles -Gate Pulls -Gate Stops
Solid Bronze Gate Hardware
SPECIALTY HINGES
Small Butt Hinges
Piano Hinges - Continuous Hinges
Soss Hinges & Other Invisible Hinges
Strap Hinge - Dummy Strap Hinges
No Mortise Hinges - Bi-Fold Door Hinge
Tee Hinges
Chest Hinges - Box Hinges - Lid Supports
Garage Door Hinges
Folding Screen Hinges
Refrigerator Hinges - Ice Box Hinges
Weld-on Hinges - Welding Hinges
Shower Door Hinges
SHUTTER & WINDOW
Shutter Hinges, Interior
Shutter Hinges, Exterior
Shutter Dogs, Exterior
Shutter Hardware, Exterior
Window Hinges
Window Hardware
Truth Window Hardware
SCREWS
STAINLESS STEEL HINGES & HARDWARE
Butt, Strap & Tee Hinges, Stainless
Gate Hardware & Hinges, Stainless
Cabinet & Furniture Hardware & Hinges, Stainless
Window & Shutter Hardware & Hinges, Stainless
Industrial Hinges, Stainless
Screws, Stainless Steel
| | |
Recent Customer Feedback:
I have to say that I am not only
impressed by the stock that you
offer but that I am thrilled by the
fact that you have delivered what
I ordered when I asked that it be
delivered. With all of the "big box"
home improvement centers
replacing the older hardware
stores it has become increasingly
tougher to find repair parts. After
surfing your site a bit it is obvious
that you folks are a place that I will
recommend to my buddies for their
cabinet repair and construction
needs. Thanks so much for taking
such excellent care of me. - Joe
How fast and helpful you have
been in helping me, not only to
get info on your product but also
the web site to help me build the
door/bookshelf I wanted to
achieve. Thank you for your quick
and accurate help. -Jill O'Brien
Thank you for the prompt response.
If I can't find 'em, I'll be back for
the bigger hinges and just recut the
doors. Thanks again. Your customer
service makes you stand out from
your competitors. -Dennis Fitch
|
|
|
Home > GATE HINGES AND HARDWARE > Gate Grills -Gate Handles -Gate Pulls -Gate Stops
Gate Grills -Gate Handles -Gate Pulls -Gate Stops
Grapevine Door & Gate Grille
|
|
Description:
|
Finishes: |
- Gate grille covers up a speakeasy opening on your gate or door.
- Grille measures 12" wide by 14-1/2" tall. Projects 4-1/2" from surface of gate or door.
- Made from steel base material.
- Fasteners are included.
- PLEASE NOTE: These grilles are handmade and dimensions may vary slightly from those listed
|
|
|
14-1/4" Gate & Door Grille
|
|
Description:
|
Finishes: |
- Gate grille covers up a speakeasy opening on your gate or door.
- Grille measures 12" wide by 14-1/4" tall. Projects 2" from surface of gate or door.
- Made from steel base material.
- Fasteners are included.
- PLEASE NOTE: These grilles are handmade and dimensions may vary slightly from those listed
|
|
|
Pull for Gates and Doors, Solid Bronze
Finishes:
|
|
Description:
|
|
- Solid bronze pull for gates and doors for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
- Available in two lengths; 12.5" and 17.5".
- The 12.5" size has a screw hole center to center dimension of 11.5".
- The 17.5" size has a screw hole center to center dimension of 16.5".
- Attachment screws are included (Stainless steel flat head 5/16" diameter machine screws). Please specify in the comment section when you check out whether you would like your attachment screws 1-3/4" in length or 2-1/2" in length.
- Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. This means that it changes over time in a way that most people find desirable. When bronze is exposed to air it will tarnish quickly and turn brown. When bronze is exposed to exterior elements it will turn green. This condition is known as "patina". This is also considered desirable by most people. These conditions are not considered "defects" but are part of the natural beauty of bronze.
- PLEASE NOTE: We can special order these pulls so that you can mount one on each side of your door with no mounting hardware or screws visible (known as "back-to-back mounting"). Please call if you wish to order "back-to-back" mounting. We will need to know your door thickness. There is an additional charge of $30.00 for two pulls set up for "back-to-back mounting".
|
|
15-5/8 Twist Grille for Gates & Doors
|
|
Description:
|
Finishes: |
- Gate grille covers up a speakeasy opening on your gate or door.
- Grille measures 12" wide by 15-5/8" tall. Projects 2" from surface of gate or door.
- Made from steel base material.
- Fasteners are included.
- PLEASE NOTE: These grilles are handmade and dimensions may vary slightly from those listed
|
|
|
Curved Plate Lever Turn, Solid Bronze
Finishes:
|
|
Description:
|
|
- Solid Bronze lever turn for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
- Lever turn can be combined with a spring latch (our SKU 634014) and spindle (our SKU 634004) to create a gate latch.
- To create a gate latch purchase a Right Hand lever turn and a Left Hand lever turn (one for the front and one for the back of the gate or door), one spindle and one spring latch per gate or door.
- Lever turn shown in photo is Left Hand model.
- Lever turn back plate measures 9-3/4" tall and 2-3/4" wide. Lever projection is 3-1/4".
- Spring latch fits into a 1" diameter hole drilled into the edge of the door. Spring latch backset (distance from the edge of the door to the center of the spindle hole) is 2-3/4".
- Spring latch bolt protrudes a maximum of 7/16" (similiar to the spring latch on a typical front door). Spring latch includes a solid brass trim piece for the edge of the door and a solid brass strike plate, both pieces are oil rubbed bronze finish. Also included with spring latch are fasteners, paper installation template and a dust box. Spring latch contains some steel internal parts.
- Spindle is 5" long by 5/16" square. Can be used on a maximum 3" thick door. For narrower doors it can easily be cut down with a hacksaw. Spindle is made from steel with a yellow zinc plating.
- Mounting screws are included with the lever turn.
- Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. This means that it changes over time in a way that most people find desirable. When bronze is exposed to air it will tarnish quickly and turn brown. When bronze is exposed to exterior elements it will turn green. This condition is known as "patina". This is also considered desirable by most people. These conditions are not considered "defects" but are part of the natural beauty of bronze.
|
|
Barrel Bolt, Solid Bronze
Finishes:
|
|
Description:
|
|
- Solid bronze barrel bolt is lockable with a padlock (padlock not included).
- Bolt measures 8" long by 5/8" diameter.
- Handle measures 4".
- Mounting brackets are 1-3/4" by 3/4".
- Barrel bolt surface mounts to gate or door.
- Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. This means that it changes over time in a way that most people find desirable. When bronze is exposed to air it will tarnish quickly and turn brown. When bronze is exposed to exterior elements it will turn green. This condition is known as "patina". This is also considered desirable by most people. These conditions are not considered "defects" but are part of the natural beauty of bronze.
|
|
12-1/8" Flat Bar Door & Gate Grille
|
|
Description:
|
Finishes: |
- Gate grille covers up a speakeasy opening on your gate or door.
- Grille measures 10-1/4" wide by 12-1/8" tall. Projects 1-1/2" from surface of gate or door.
- Made from steel base material.
- Fasteners are included.
- PLEASE NOTE: These grilles are handmade and dimensions may vary slightly from those listed
|
|
|
10-1/8" Square Bar Grille for Gates & Doors
|
|
Description:
|
Finishes: |
- Gate grille covers up a speakeasy opening on your gate or door.
- Grille measures 10" wide by 10-1/8" tall. Projects 2" from surface of gate or door.
- Made from steel base material.
- Fasteners are included.
- PLEASE NOTE: These grilles are handmade and dimensions may vary slightly from those listed
|
|
|
10-1/4" Square Flat Bar Grille for Gates & Doors
|
|
Description:
|
Finishes: |
- Gate grille covers up a speakeasy opening on your gate or door.
- Grille measures 10-1/2" wide by 10-1/4" tall. Projects 2-1/4" from surface of gate or door.
- Made from steel base material.
- Fasteners are included.
- PLEASE NOTE: These grilles are handmade and dimensions may vary slightly from those listed
|
|
|
Solid Bronze Gate Grill
Finishes:
|
|
Description:
|
|
- Gate grille covers up a speakeasy opening on your gate or door.
- Solid bronze gate and door grill for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
- Grill measures 14-1/4" by 14-1/4" and is made from 1/2" square solid bronze.
- Gate grille covers up a speakeasy opening on your gate or door.
- Wood screws are included.
- Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. This means that it changes over time in a way that most people find desirable. When bronze is exposed to air it will tarnish quickly and turn brown. When bronze is exposed to exterior elements it will turn green. This condition is known as "patina". This is also considered desirable by most people. These conditions are not considered "defects" but are part of the natural beauty of bronze.
|
|
Grapevine Pull for Gates and Doors
|
|
Description:
|
Finishes: |
- Door and gate pull with grapevine styling. Features a vine like handle with a cluster of grapes at each end and a grape leaf at each end that acts as the mounting plates.
- Available in two sizes; medium and large.
- The large size measures 19" from tip to tip. The handle diameter is 1". Each grape leaf mounting plate is about 5" tall by 4" wide.
- The medium size measures 15.5" from tip to tip. The handle diameter is 3/4". Each grape leaf mounting plate is about 4" tall by 3-1/4" wide.
- Made from steel.
- Wood screws are included.
|
|
|
9" Double Heart Handle
Finishes:
|
|
Description:
|
|
- Forged Iron base material
- Measures 9" from tip to tip
- Stands 1-1/2" in relief
- Matching wood screws included
- This handle is a match and works as a dummy handle for our 9" Double Heart Thumb Latch (SKU 778140).
- This high quality product matches our other "Forged Iron" Strap hinges and Dummy Straps
|
|
11" Heart Handle
Finishes:
|
|
Description:
|
|
- Large door pull with a heart at each end
- Measures 11 inches tall
- Stands 2-3/8" in relief
- Forged Iron base material
- Matching wood screws are included
- This high quality product matches our other "Forged Iron" Strap Hinges and Dummy Straps
- If you need a dummy handle to match our SKU 778013 (11" Rim Gate Latch) this handle is an exact match.
|
|
10" Heavy Iron Gate Pull
|
|
Description:
|
Finishes: |
- Heavy Iron handle for gates or doors.
- Installs with 1-1/2" matching wood screws (included).
- Made from solid steel and powder coated to resist corrosion.
- Mounting plates measure 1-7/8" by 2-1/2"
- Grip is 1-1/8" in diameter at thickest point.
|
|
|
12" Hammered Gate Pull
|
|
Description:
|
Finishes: |
- Gate pull is approximately 12" tall by 1-3/8" wide at its widest point.
- Made from steel that is 1/4" to 5/16" thick.
- Has the look of hammered or pounded wrought iron.
- Matching screws are included.
|
|
|
Twisted Bar Gate Pull
|
|
Description:
|
Finishes: |
- Decorative gate pull with square mounting plates and twisted bar grip.
- Pull measures 9" from top to bottom.
- Square mounting plates measure 2" by 2".
- Handle projection is 3-1/4".
- Diameter of twisted bar is 11/16".
- Matching wood screws are included.
- Made from steel base material.
|
|
|
Black Twisted Bar Pull
|
|
Description:
|
Finishes: |
- Decorative gate or door pull with diamond style mounting plates and twisted bar grip.
- Pull measures 9-1/2" from top to bottom including mounting plates.
- Mounting plates measure 1-1/2" wide by 2" tall.
- Handle projection is 2-3/4".
- Diameter of twisted bar is 3/4".
- Made from steel base material. Wood screws are included.
|
|
|
10.5" Stainless Steel Gate Handle
|
|
Description:
|
Finishes: |
- Stainless steel gate handle measures 10.5" by 1.25" at widest point and 1/16" thick.
- Great for use in marine environments or anywhere the look of stainless steel is desired.
- Stainless steel is recommended for redwood, cedar, vinyl and ACQ (treated) lumber.
- Made from solid stainless steel (Type 304)
- Stainless steel lag screws are included.
|
|
|
Large Ring Pull for Gates
Finishes:
|
|
Description:
|
|
- Large drop ring pull for gates or doors.
- Available in two models; a twisted ring model as shown in photo to left and a smooth ring model (to view click on link below).
- Diameter of ring is 5-1/4". It is made out of 5/8" diameter material.
- Attachment plate measures 3.5" high by 1.5" wide. Pull projects 1.25" from surface it is mounted to.
- Made of steel base material.
- Wood screws are included.
|
|
Small Ring Pull for Gates
|
|
Description:
|
Finishes: |
- Small drop ring pull for gates or doors.
- Available in two models; a twisted ring model as shown in photo to left and a smooth ring model (to view click on link below).
- Diameter of ring is approximately 3". It is made out of 1/2" diameter material.
- Attachment plate measures 3.5" high by 1.5" wide. Pull projects 1.25" from surface it is mounted to.
- Made of steel base material.
- Wood screws are included.
|
|
|
Small Black Twist Ring
|
|
Description:
|
Finishes: |
- Decorative ring for gates.
- Ring diameter is 3 inches.
- Made from steel base material.
- Matching wood screws are included.
|
|
|
Large Black Twist Ring
|
|
Description:
|
Finishes: |
- Decorative ring pull for gates.
- Ring diameter is 4 inches.
- Made from steel base material.
- Matching wood screws are included.
|
|
|
Polymer Gate Handle
Finishes:
|
|
Description:
|
|
- Fits all types of gates and materials.
- Fits right and left hand opening gates.
- Requires a minimum 5/32" gap between gate and gate post.
- Made from tough molded polymers, will not rust or stain.
- Fasteners are included.
|
|
Gate Stop for Metal Gates
Finishes:
|
|
Description:
|
|
- Gate stop acts to stop gate properly and helps keep gate from slamming shut.
- Integrated rubber buffer softens gate slam and reduces noise.
- Requires a minimum of 5/16" gap between gate and post.
- Molded reinforced polymer construction.
- For gates higher than 4 feet use two Gate Stops (located near top and bottom of gate).
- Uses 3 each #8 pan head sheet metal screws (not included). Stainless steel screws are offered for purchase during checkout.
|
|
Gate Stop for Wood & Vinyl Gates
Finishes:
|
|
Description:
|
|
- Gate stop acts to stop gate properly and helps keep gate from slamming shut. Made for gates made of wood or vinyl.
- Integrated rubber buffer softens gate slam and reduces noise.
- Requires a minimum of 7/16" gap between gate and post.
- Molded reinforced polymer construction.
- For gates higher than 4 feet use two Gate Stops (located near top and bottom of gate).
- Uses 5 each #12 round head wood screws (not included). Stainless steel screws are offered for purchase during checkout.
|
|
Solid Bronze Gate Stop
Finishes:
|
|
Description:
|
|
- Solid bronze gate stop will stop gate in the closed position. The installation of a gate stop prevents damage to your gate latch by stopping the gate before it hits the latch bar. Bronze latch bars will become weakened and eventually break if gates are allowed to slam against them.
- Gate stop measures 2" tall by
2" wide with a 1.5" projection.
- Mounting screws are included.
- Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.
|
|
|
|
|
