• Heart style strap hinge with a pintle end
 
• Pintle end fastens to wood or masonry (with masonry anchor not included)
 
• Comes complete with black square head wood screws
 
• This hinge can be used on a gate weighing up to 175lbs (per pair of hinges).
 
• Pintle style mounting allows gate to be removed by lifting off pintle
• With "pintle style mounting" your gate can be installed so it can swing both ways (in and out) or it can be installed so that it opens only one way (either in or out).
 
• Normal installation requires two hinges per gate
• "Hook Size" refers to the dimensions of the threaded portion.

 
• Black Iron

 
• Heart style strap hinge with a pintle end that fastens to wood or masonry (with masonry anchor, not included)
 
• This strap hinge is for heavy duty use. It can be used on a gate weighing up to 250lbs (per pair of hinges). Comes complete with 3 black carriage bolts (plus nuts and washers) and a black square head wood screw
 
• Pintle style mounting allows gate to be removed by lifting off pintle
• With "pintle style mounting" your gate can be installed so it can swing both ways (in and out) or it can be installed so that it opens only one way (either in or out).
 
• Normal installation requires two hinges per gate
• "Hook Size" refers to the dimensions of the threaded portion. "Screw Size" refers to the carriage bolt dimensions.

 
• Black Iron

   
• This is a very heavy duty hinge specially made for heavy gates and doors
 
• This hinge will swing a full 180 degrees if installed without a stop
 
• Hinge is made up of a mounting plate (flange) and J-Bolt arm
 
• Hinge pivots on a steel ball bearing and includes a grease fitting to keep the bearing lubricated
 
• Mounts with 3/8" lag screws or bolts (not included)
• The minimum gap between the post and edge of gate frame is 1-7/8" for SKU 783000 and 2-1/2" for SKU 783002.
• The maximum spread between the two nuts on the threaded part is as follows; for the 783000 it is 3", for the 783002 it is 4".
 
• The thread size on our SKU 783000 is 5/8 x 11. The thread size on our SKU 783002is 3/4 x 10.
 
• Weight rating is for 2 hinges

 
• Black Coated

 
• Bean style strap hinge with a pintle end
 
• Pintle end fastens to wood or masonry (with masonry anchor not included)
 
• Comes complete with black wood screws to attach to gate side
 
• This hinge can be used on a gate weighing up to 175lbs (per pair of hinges).
 
• Pintle style mounting allows gate to be removed by lifting off pintle
• With "pintle style mounting" your gate can be installed so it can swing both ways (in and out) or it can be installed so that it opens only one way (either in or out).
 
• Normal installation requires two hinges per gate
• "Hook Size" refers to the dimensions of the threaded portion.
 
• Be sure to see our section "OTHER GATE ITEMS" for gate latches, handles and cane bolts in the same style

 
• Black Iron

 
• Bean style strap hinge with a pintle end that fastens to wood or masonry (with masonry anchor, not included).
 
• This strap hinge is for heavy duty use. It can be used on a gate weighing up to 250lbs (per pair of hinges). Comes complete with 3 black carriage bolts (plus nuts and washers) and a black square head wood screw.
 
• Pintle style mounting allows gate to be removed by lifting off pintle.
• With "pintle style mounting" your gate can be installed so it can swing both ways (in and out) or it can be installed so that it opens only one way (either in or out).
 
• Normal installation requires two hinges per gate.
 
• "Hook Size" refers to the dimensions of the threaded portion. "Screw Size" refers to the carriage bolt dimensions.

 
• Black Iron

• durable black finish and steel base material
• decorative style
• complete with lag screws

• Black Coated

• durable black finish and steel base material
• decorative style
• complete with lag screws

• Black Coated

 
• This hinge is made up of two parts: a "pintle" side and an "eye".
 
• Made from malleable iron.
 
• Hinge can be installed in masonry by using a masonry anchor.
 
• SKU 504860 measures 8.5" tip-to-tip as shown in the photo to the left. The eye size and pintle diameter is 1/2". The screw is a 5/8" screw.
 
• SKU 504861 measures 10.25" tip-to-tip as shown in the photo to the left. The eye size and pintle diameter is 5/8". The screw is a 3/4" screw.
 
• These hinges are sold by the pair. A pair is two sets of hinges which is usually enough to hang one gate or door.
 
• The weight rating listed is per pair of hinges.

 
• Zinc Chromate plated

 
• The "bolt" and "strap" for this hinge are ordered as separate components.
 
• When ordering components make sure that the "pintle" sizes match. The pintle sizes available for these components are 1/2", 5/8", 3/4" and 7/8".
• Maximum post sizes(maximum distance between the washers) for the "Bolt" are as follows; SKU 504820 is 4-5/8", SKU 504821 is 6-1/2", 504822 is 10-1/4", 504823 is 7-7/8", 504824 is 10" and 504825 is 9-7/8".
 
• The weight ratings listed are for one hinge. For example, if the listed weight rating is 100 lbs. and you install 2 hinges, your 2 hinges would be rated at 200 lbs.
 
• One hinge consists of one "strap" and one "bolt". You would normally order 2 straps and 2 bolts to hang one gate or door.
 
• The "straps" are normally installed using carriage bolts (not included).
 
• Two washers and two nuts are included with each "bolt" ordered.

 
• Zinc Chromate

 
• The Screw Hook and Strap Hinges found in this section are only available in smaller sizes and are sold by the pair.
 
• A pair is two complete hinges. A pair is what is normally required to hang one gate or door.
 
• For surface mounted doors.
 
• Heavy duty steel strap pivots on post of a malleable iron screw hook.
 
• Uses 5/16” carriage bolts for the strap (not included)
 
• For a selection of larger Screw Hook and Strap Hinges click on the link below.

 
• Zinc Plate

 
• The "screw" and "strap" for this hinge are ordered as separate components.
 
• When ordering components make sure that the "pintle" sizes match. The pintle sizes available for these components are 1/2", 5/8", 3/4" and 7/8".
 
• The weight ratings listed are for one hinge. For example, if the listed weight rating is 100 lbs. and you install 2 hinges, your 2 hinges would be rated at 200 lbs.
 
• One hinge consists of one "strap" and one "screw". You would normally order 2 straps and 2 bolts to hang one gate or door.
 
• The "straps" are normally installed using carriage bolts (not included).
 
• Steel base material

 
• Zinc Chromate

 
• The "Screw Eye" and "Screw Pintle" for this hinge are ordered as separate components.
 
• When ordering components make sure that the "pintle" sizes match. The pintle sizes available for these components are 1/2" (Small) and 5/8" (Large).
 
• The weight ratings listed are for one hinge. For example, if the listed weight rating is 100 lbs. and you install 2 hinges, your 2 hinges would be rated at 200 lbs.
 
• One hinge consists of one "Screw Eye" and one "Screw Pintle". You would normally order 2 screw eyes and 2 screw pintles to hang one gate or door.

 
• Zinc Chromate

 
• Upright pintle mounts to gate post and strap mounts to gate.
 
• The "Upright" and the "Strap" are ordered as separate components.
 
• When ordering components make sure that the pintle sizes match. The pintle sizes available for these components are 1/2" and 5/8".
• The weight ratings listed are for one hinge. For example if the listed weight rating is 100 lbs. and you install 2 hinges, your 2 hinges would be rated for a 200lb gate.
 
• Components install with lag screws or carriage bolts (not included).
 
• The design of this product creates a small gap between the post and gate (approximately 3/8") after installation.

 
• Zinc Chromate

 
• The Upright Pintle is part of our pintle system of gate hinges.
 
• This product will work with a strap or screw eye.
 
• When ordering the other part of this hinge make sure that the pintle sizes match. For example if you order an upright pintle with a 5/8" pintle your bolt must have a 5/8" pintle.
 
• Made from steel base material.
 
• Both the 1/2" and 5/8" Upright pintle use 2 each 3/8" lag screws per upright (not included).
 
• The weight ratings listed are for one hinge. For example if the listed weight rating is 100 lbs and you use two hinges then your two hinges would be rated at 200 lbs.

 
• Zinc Chromate

 
• These straps are part of our pintle system of gate hinges.
 
• This product will work with the Upright Pintle, Bolt Pintle or Screw Pintle.
 
• When ordering the other part of this hinge make sure that the pintle sizes match. For example if you order a strap with a 5/8" pintle and bolt pintle to go with it your bolt pintle must have a 5/8" pintle also.
 
• Made from steel base material.
 
• Straps install with either lag screws or carriage bolts (not included).
 
• The weight ratings listed are for one hinge. For example if the listed weight rating is 100 lbs and you use two hinges then your two hinges would be rated at 200 lbs.

 
• Zinc Chromate

 
• These bolt pintles are part of our pintle system of gate hinges.
 
• This product will work with the Strap or Screw eye.
 
• Maximum post sizes(maximum distance between the washers) for the "Bolt" are as follows; SKU 504820 is 4-5/8", SKU 504821 is 6-1/2", 504822 is 10-1/4", 504823 is 7-7/8", 504824 is 10" and 504825 is 9-7/8".
 
• When ordering the other part of this hinge make sure that the pintle sizes match. For example if you order a strap with a 5/8" pintle and bolt pintle to go with it your bolt pintle must have a 5/8" pintle also.
 
• Made from steel base material.
• The weight ratings listed are for one hinge. For example if the listed weight rating is 100 lbs and you use two hinges then your two hinges would be rated at 200 lbs.

 
• Zinc Chromate

 
• These Screw Eyes are part of our pintle system of gate hinges.
 
• This product will work with a Screw Pintle, an Upright Pintle, or a Bolt Pintle.
 
• SKU 504862 fits a 1/2" Pintle, is 4-5/8" long overall and has a 1/2" diameter screw thread.
 
• SKU 504863 fits a 5/8" pintle, is 5-5/8" long overall and has a 5/8" diameter screw thread.
 
• Made from steel base material.
 
• When ordering the other part of this hinge make sure that the pintle sizes match.

 
• Zinc Chromate

 
• Upright pintle mounts to gate post and screw eye mounts to gate. Or it can be mounted upside down with the screw eye going into the post and the upright pintle mounting to the gate.
 
• The "Upright" and the "Screw Eye" are ordered as separate components.
 
• When ordering components make sure that the pintle sizes match. The pintle sizes available for these components are 1/2" and 5/8".
 
• The weight ratings listed are for one hinge. For example if the listed weight rating is 100 lbs. and you install 2 hinges, your 2 hinges would be rated for a 200lb gate.
 
• Upright Pintle installs with lag screws or carriage bolts (not included).
 
• Made from steel base material.

 
• Zinc Chromate

 
• The Screw Pintle is part of our pintle system of gate hinges.
 
• This product will work with a strap or screw eye (sold separately).
 
• When ordering the other part of this hinge make sure that the pintle sizes match. For example if you order an screw pintle with a 5/8" pintle your strap must have a 5/8" pintle also.
 
• Made from steel base material.
 
• The weight ratings listed are for one hinge. For example if the listed weight rating is 100 lbs and you use two hinges then your two hinges would be rated at 200 lbs.

 
• Zinc Chromate

 
• The pipe hinge is part of our pintle system of gate hinges.
 
• This product will work with a screw pintle, bolt pintle or upright pintle. All are sold separately.
 
• When ordering the other part of this hinge make sure that the pintle sizes match. For example if you order a Pipe Mounted Pintle Hinge with a 5/8" pintle make sure the other component has a 5/8" pintle size also.
 
• Made from steel base material.
 
• There are two models; one model fits a 1-5/8" diameter pipe and the other model fits a 2" diameter pipe (dimensions listed are actual outside diameter measurements of pipe or tubing).
 
• The weight ratings listed are for one hinge. For example, if the listed weight rating is 70lbs for one hinge and you use two hinges then your combined hinge installation would be rated at 140lbs.

 
• Zinc Chromate

 
• Medium duty livestock gate hinge for use on 1-3/4"" (outside diameter) round tube gates.
 
• Pintle side of hinge uses a "lag screw" thread to attach to the gate post with a 6.5" long bolt (11/16" diameter). Threaded portion of lag screw pintle is 4.5" so the minimum post width should be at least 4.5". Pintle size is 5/8" x 2".
 
• Carriage bolts, nuts, and washers are included to attach brackets to round gate post.
 
• These hinges are sold by the pair. A pair is usually what is required to hang one gate.
 
• PLEASE NOTE: the green tubing and wooden post shown in the photo are for illustrative purposes and are not included with the hinge.

 
• Zinc Chromate Plated

 
• Heavy duty livestock gate hinge for use on 2" (outside diameter) round tube gates.
 
• Pintle side of hinge "through-bolts" to the gate post with a 12.5" long bolt (3/4" diameter). Maximum post size is 9.5" in width. Pintle size is 7/8" x 2".
 
• Carriage bolts, nuts, and washers are included.
 
• These hinges are sold by the pair. A pair is usually what is required to hang one gate.
 
• PLEASE NOTE: the green tubing and wooden post shown in the photo are for illustrative purposes and are not included with the hinge.

 
• Zinc Chromate Plated

 
• Dummy straps install on the face of any door or gate to give the look of decorative strap hinges.
 
• The 5 smaller sized straps have a rough black iron finish. The 30" and 36" have a smooth black iron finish. Both finishes give a black wrought iron look.
 
• Decorative "Heart" styling.
 
• Steel base material and attachment screws are included.
 
• These dummy straps match the "Heart" style gate latches found in our Gate Latch and Gate Lock section.
 
• PLEASE NOTE: the two largest size straps (30" and 36") are a very heavy duty strap that is two times thicker than the other straps listed here (5/16" thick).

 
• Black Iron

 
• Strap hinges are available in two finishes. The 4 smaller sizes are a "Rough Black Iron" finish. The 2 larger sizes are a "Smooth Black Iron" finish.
 
• The hinge pin is removable so that the pad (smaller leaf) may be reversed. This allows the hinge to be installed as either a full-surface hinge or a half-surface hinge.
 
• The weight rating on the 9" and 13" hinge applies to a door with a maximum door thickness of 1-3/8" and a maximum door width of 32" using 3 hinges per door.
• The weight rating on the 17" and 20.5" hinge applies to a door with a maximum door thickness of 1-3/4" and a maximum door width of 36" using 3 hinges per door
 
• The 30" and 36" hinges are extra heavy duty hinges and are rated at 600# per pair of hinges.
 
• These hinges match our "Heart" style gate latches found in the Gate Latch and Gate Lock section of the website. Two "Heart" style latches are offered for purchase during checkout.
 
• Complete with screws.
 
• Made from steel base material.

 
• Black Iron

 
• Heart style strap hinge with a pintle end that fastens to wood or masonry (with masonry anchor, not included)
 
• This strap hinge is for heavy duty use. It can be used on a gate weighing up to 250lbs (per pair of hinges). Comes complete with 3 black carriage bolts (plus nuts and washers) and a black square head wood screw
 
• Pintle style mounting allows gate to be removed by lifting off pintle
• With "pintle style mounting" your gate can be installed so it can swing both ways (in and out) or it can be installed so that it opens only one way (either in or out).
 
• Normal installation requires two hinges per gate
• "Hook Size" refers to the dimensions of the threaded portion. "Screw Size" refers to the carriage bolt dimensions.
 
• Be sure to see our section "OTHER GATE ITEMS" for gate latches, handles and cane bolts in the same style

 
• Black Iron

 
• Heart style strap hinge with a pintle end
 
• Pintle end fastens to wood or masonry (with masonry anchor not included)
 
• Comes complete with black square head wood screws
 
• This hinge can be used on a gate weighing up to 175lbs (per pair of hinges).
 
• Pintle style mounting allows gate to be removed by lifting off pintle
• With "pintle style mounting" your gate can be installed so it can swing both ways (in and out) or it can be installed so that it opens only one way (either in or out).
 
• Normal installation requires two hinges per gate
• "Hook Size" refers to the dimensions of the threaded portion.
 
• Be sure to see our section "OTHER GATE ITEMS" for gate latches, handles and cane bolts in the same style

 
• Black Iron

 
• Beautiful lift-off type gate hinge with uniquely textured surface.
 
• Door or gate can be lifted off after installation.
 
• Strap is made from 2" wide by 1/4" thick steel.
 
• Vertical plate measures 1-3/4" by 6-1/4" by 7/32". Pintle diameter is 5/8".
 
• Wood screws are included.

PLEASE NOTE; the post plate and the gate plate for this hinge are offset from each other by 1/2". For most gate installations, this is not a problem. However, if you want your gate and post to be perfectly flush, you should not choose this hinge.

 
• Black Powder Coated

 
• Bean style strap hinge with a pintle end that fastens to wood or masonry (with masonry anchor, not included).
 
• This strap hinge is for heavy duty use. It can be used on a gate weighing up to 250lbs (per pair of hinges). Comes complete with 3 black carriage bolts (plus nuts and washers) and a black square head wood screw.
 
• Pintle style mounting allows gate to be removed by lifting off pintle.
• With "pintle style mounting" your gate can be installed so it can swing both ways (in and out) or it can be installed so that it opens only one way (either in or out).
 
• Normal installation requires two hinges per gate.
 
• "Hook Size" refers to the dimensions of the threaded portion. "Screw Size" refers to the carriage bolt dimensions.

 
• Black Iron

 
• Dummy straps install on the face of any door or gate to give the look of decorative strap hinges.
 
• Decorative "Bean" styling.
 
• Please note that some strap lengths are available in a rough black iron finish and some are available in a smooth black iron finish. Both finishes give a black wrought iron look.
 
• Attachment fasteners are included. Style of attachment varies. Please see link below for a schedule of included fasteners.
 
• Made from steel base material.
 
• Be sure to see our Gate Latch and Gate Lock section for more matching "Black Iron Hardware".
 
• PLEASE NOTE: the two largest size straps (30" and 36") are a very heavy duty strap that is two times thicker than the other straps listed here (5/16" thick).

 
• Smooth Black Iron
 
• Rough Black Iron

 
• Strap hinges are available in either a "Rough Black Iron" or a "Smooth Black Iron" finishes.
 
• Strap hinges are available in 4 lengths; 15-5/8", 19-5/8", 30" and 36". The 30" and 36" hinges are extra heavy duty hinges with a weight rating of 600 lbs per pair of hinges.
 
• For interior or exterior use.
 
• Hinge pin is removable.
 
• Pad (small hinge leaf) is reversible for full or half-surface installation.
 
• Comes complete with matching screws.
 
• Weight rating is based on using 3 hinges per gate or door. For the 30" and the 36" hinges the weight rating is based on using 2 hinges per door.
 
• These hinges match our other black iron hardware found in the Gate Hinges & Hardware section.

 
• Smooth Black Iron
 
• Rough Black Iron

 
• For interior or exterior use
 
• Hinge pin is removable
 
• Pad is reversible for full or 1/2 surface installation
• Weight rating is based on using 3 hinges per gate or door.
 
• Comes complete with matching screws
 
• Be sure to see our other Black Iron Gate Hardware in the sections entitled "Gate Latches and Handles" and "Other Gate Hardware"

 
• Smooth Black Iron

 
• False Straps for use with butt style hinges
 
• Dummy straps are made from steel except for SKU 778264 and SKU 778266 which are made from cast aluminum. All have a smooth black iron finish.
• Spear shape at one end
 
• Complete with matching wood screws
 
• Be sure to see our other matching black iron hardware in the "Gate Latches & Handles" and the "Other Gate Hardware" sections.

 
• Smooth Black Iron

 
• Bean style strap hinge with a pintle end
 
• Pintle end fastens to wood or masonry (with masonry anchor not included)
 
• Comes complete with black wood screws to attach to gate side
 
• This hinge can be used on a gate weighing up to 175lbs (per pair of hinges).
 
• Pintle style mounting allows gate to be removed by lifting off pintle
• With "pintle style mounting" your gate can be installed so it can swing both ways (in and out) or it can be installed so that it opens only one way (either in or out).
 
• Normal installation requires two hinges per gate
• "Hook Size" refers to the dimensions of the threaded portion.
 
• Be sure to see our section "OTHER GATE ITEMS" for gate latches, handles and cane bolts in the same style

 
• Black Iron

 
• Heavy duty strap hinge, door or gate can be lifted off after installation.
 
• Available in two finishes; powder coated black or heavy galvanized (true galvanizing not zinc plated). Galvanized models are suitable for sea coast use.
 
• Traditional British Hardware styling.
 
• Made from 3/16" thick steel.
 
• Vertical mounting plate sizes; For SKU 215130 and 215110, it measures 1.5" x 5-3/8". For SKU 215132 and 215112, it measures 2" x 6.5". For SKU 215134 and 215114, it measures 2-3/16" by 6.5". SKU 215136 vertical plate measures 8" by 2-3/16".
 
• Matching wood screws are included. One galvanized through bolt is included per hinge(carriage bolt; 3/8" x 4"). Through bolt is mounted in square hole.

 
• Powder Coated Black
 
• Galvanized

 
• Heavy duty strap hinge with Traditional British Hardware styling.
 
• Strap is approximately 3/16" thick and 2" wide. Hinge pin is 5/8" in diameter.
 
• Hardware as it is installed on post side of hinge measures approximately 6.5" tall by 2-1/4" wide.
 
• Black finish is a heavy black powder coating. Galvanized finish is a true heavy galvanizing suitable for outdoor use near a seacoast.
• Matching wood screws are included. One galvanized through bolt is included per hinge. Through bolt is mounted in square hole.

 
• Black Powder Coat
 
• Galvanized

 
• Strap angle is adjustable to fit gates and doors with curved edges.
 
• Hinge has a true galvanized finish (not zinc chromate plated), suitable for use around a sea coast.
 
• Hinge strap is approximately 2-1/4" wide by 3/16" thick.
 
• Vertical wing measures approximately 8" tall by 2-1/2" wide.
 
• Angle of strap may be set at any angle from horizontal to 90 degrees up or down.
 
• Made from steel base material.
 
• Wood screws are provided for the vertical wing and 9/16" x 4" carriage bolts are provided for the strap.

 
• Galvanized

 
• Ornamental strap hinge is meant to be surface mounted.
 
• Strap measures 15" long and 6" at its widest point.
 
• Hinge leaf measures 4" tall by 1-3/8".
 
• Matching flat head wood screws are included.
 
• Made from steel base material.

 
• Black Powder Coated

 
• Ornamental strap hinge is meant to be surface mounted (door and frame are flush with each other).
 
• Available in two lengths; an 11" strap length and an 18" strap length (measured from tip to center of hinge pin).
 
• Hinge leaf measures 4" tall.
 
• Matching flat head wood screws are included.
 
• Made from steel base material and powder coated black to resist corrosion.

 
• Black Powder Coated

• steel base material
• coated with a durable black finish
• reversible pin provides for right or left hand applications
• post leaf is 4”
• strap length is 7-11/16”
• complete with lag screws

• Black Coated

• steel base material
• coated with a durable black finish
• reversible pin provides for right or left hand installations
• post leaf is 4-7/16”
• strap length is 8”
• complete with lag screws

• Black Coated

 
• Hinge features a decorative scalloped design.
 
• Made from steel base material.
 
• Hinge is coated with a durable black finish.
 
• Features a special bearing to give extended service.
 
• Complete with screws.
 
• PLEASE NOTE: The "Size" refers to the length of one hinge leaf. The "Size Open" dimension is the tip-to-tip" measurement when the hinge is in the open position as shown in the photo.

 
• Black Coated

• heavy duty construction minimizes gate sag
• durable black finish
• reversible pin provides for right or left hand applications
• steel base material
• complete with lag screws

• Black Coated

 
• These extra heavy duty ball bearing strap hinges can hold up to a 3800 lb. gate or door. Hinge choice is based on gate width and weight. See chart at link below to assist in hinge choice and number of hinges to use.
 
• These are the best quality and heaviest weight strap hinges that we know of.
 
• Offset pintle can be set back on face of jamb or wall to allow swing clear application.
 
• Strap and pintle painted off-white. User can repaint with a different color if desired.
 
• Pintle pin & bearings are zinc plated for rust resistance.
 
• These hinges are made in USA.
 
• Pintle uses 1/2” lag screw, strap uses 3/8” lag screw.
 
• Click on the link below for a table that gives the weight ratings for these hinges.

 
• Painted off-white

 
• Strap side of hinge measures 3" wide and 5/32" thick and is made of plated steel
 
• Plate side of hinge measures 6-1/8" by 2-1/2" by 1/2" thick and is made of cast aluminum
 
• Hinge swings on bronze bearings
 
• For doors where the frame and the door are flush
 
• Plate side of hinge uses #14 flat head screws (not included)
 
• Strap side of hinge uses 3/8" bolts (not included)
• The 12", 18" and 24" dimensions are measured from the end of the strap to the pivot point of the strap

Weight Ratings are for two hinges per door

SKU 902002 and 902010 are rated at 250lbs for up to a 36" door and 200lbs for a 36" to 40" door

SKU 902004 and 902012 are rated at 300lbs for a 36" to 40" door and 250lbs for a 42" to 46" door

SKU 902006 and 902014 are rated at 300lbs for up to a 48" door

 
• Chrome plated, highly polished
 
• Black Coated

 
• Strap side of hinge measures 2-1/2" wide by 9" long by 5/8" thick cast aluminum
 
• Plate side of hinge measures 4-5/8" high by 2-3/4" wide by 3/8" thick
 
• Hinge swings on bronze bearings
 
• Each hinges uses 8 each #14 flat head screws (not included)
 
• For doors where the frame and door are flush with each other
 
• The hinges are rated at 200 lbs for a pair of hinges on a door up to 36" wide

 
• Polished aluminum
 
• Flat Black

 
• Combine with a butt hinge to create the strength of a butt hinge and the look of a strap hinge
 
• Features decorative curls along edges
 
• Steel base material
 
• Screws are included
 
• Thickness of material is 5/32"
 

 
• Flat black

 
• False strap for use with butt hinges.
 
• Available in two lengths; 16" and 12". Actual lengths may vary by 1/4".
 
• The 12" is approximately 2-5/16" wide at the widest point.
 
• The 16" is approximately 4-3/8" wide at the widest point
 
• Made of rough iron with a flat black iron finish (Powder coated black)
 
• Matching fasteners are included.

 
• Black iron

 
• false straps for use with butt hinges.
 
• made of rough iron with a hammered flat black finish.
• strap is 3.5" wide at the widest point.
• uses a #7 flat or oval head screw (not included).

• flat black, hammered

 
• Combine with a butt hinge to create the strength of a butt hinge and the look of a strap hinge
 
• Overall length is 27-1/2"
 
• Pad end width is 1-9/16"
 
• Thickness is 7/32"
 
• Comes with decorative pyramid head screws (3/4" square head)

 
• smooth flat black

 
• Antique style strap hinge made for surface mounting (door and frame are flush with each other).
 
• Strap leaf measures 11-3/4" by 2-3/8" at widest point.
 
• Vertical leaf measures 4-5/16" by 1-1/8".
 
• Measurements are to center of hinge pin.
 
• Hinges are weight rated at 15 lbs. per hinge.
 
• Made from steel base material. Matching wood screws are included.

 
• Black Powder Coated

 
• This very high quality solid bronze strap hinge is made for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• This product is sold in components. The components consist of 2 items; a strap which attaches to the gate surface and a pintle which attaches to the post. The pintle is available as either a "Plate Pintle" or a "Screw-in Pintle".
 
• Lag screws are included. The Lag Screws are made from stainless steel and coated black. Lag Screws are available in two lengths (1.5" or 2.5"). Please specify which length you prefer in the "Comment" section when you checkout.
 
• Two hinges will support a 150 lb. gate or door. Three hinges will support a 250 lb. gate or door.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Natural Solid Bronze

 
• Antique style shutter hinge made for surface mounting.
 
• Strap leaf measures 12-1/4" by 2-3/4" at widest point.
 
• Vertical leaf measures 5-1/4" by 1-3/8".
 
• Width measurements are to center of hinge pin.
 
• Hinges are weight rated at 15 lbs per hinge.
 
• Made from steel base material. Matching wood screws are included.

 
• Black powder coated

 
• Dummy straps install on the face of any door or gate to give the look of a decorative strap hinge. They are normally used in combination with full mortise butt hinges.
 
• Dummy straps made of solid bronze are for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Matching wood screws are included.
 
• These beautiful dummy straps are available in 6 lengths.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid Natural Bronze

 
• Solid bronze dummy strap hinge for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Dummy straps provide a decorative strap look to a gate or door hinged with full mortise butt hinges.
 
• Available in two lengths. Both sizes are made from 1/4" thick material. Both sizes are 2" wide and measure 4" at the widest part.
 
• Wood screws are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid Natural Bronze

 
• Dummy strap has a unique hammered black finish
 
• Measures 14" long, 3-3/8" at wide end, 1-3/8" at narrow end and 7/32" thick
 
• This product is sold in pairs only
 
• Steel base material
 
• Matching wood screws included
 

 
• Hammered black finish

 
• False Strap for use with butt hinges
 
• Black square head screws are included
 
• 24 inches in length
 
• 10-1/2 inches at widest point
 
• made of 7/64" thick steel

 
• Black Iron

 
• English style dummy strap is available in two lengths; 12" and 16".
 
• The 12" strap measures 4.5" at its widest point.
 
• The 16" strap measures 6.25" at its widest point.
 
• Both are made from approximately 7/32" steel.
 
• Wood screws are included.

 
• Black Powder Coated

 
• Ornamental dummy strap is meant to be used with a butt type hinge.
 
• Strap measures 10" long by 2-1/4" at its widest point. Thickness is 3/16".
 
• Made of steel with rough texture to simulate wrought iron.
 
• Matching wood screws are included.

 
• Black Powder Coated

 
• Ornamental dummy strap is meant to be used with a butt type hinge.
 
• Strap measures 8.5" long by 2-3/8" at its widest point. Thickness is 1/4".
 
• Made of steel with rough texture to simulate wrought iron.
 
• Matching wood screws are included.

 
• Black Powder Coated

 
• Flat end dummy strap is used with a butt hinge to give the strap hinge appearance.
 
• Dummy strap is available in 4 lengths. All dummy straps are 1/4" thick and 1-1/2" in width.
 
• Made from steel.
 
• Includes wood screws for installation and round 1-3/8" clavos to cover up the wood screw heads and for additional detail.

 
• Flat Black Wrought Iron

 
• Dummy straps install on the face of any door, gate or shutter to give the look of decorative strap hinges.
 
• These dummy straps feature a black hammered or wrought iron look with an arrowhead style.
 
• Available in 4 lengths. They are 2" wide and 1/4" thick.
 
• Round decorative clavos (1-1/4" diameter) are included to cover up the attachment screws (which are included also).
 
• Made from steel base material.

 
• Hammered Black Iron

 
• Heavy duty strap hinge for gates, truck doors, or anywhere a large stainless steel strap hinge is needed.
 
• Made for surface mounted flush installation. A 270 degree opening is possible with proper installation. Hinge pin is removable.
 
• Made from 0.157" thick type 304 stainless steel.
 
• Horizonal strap measures 2-5/8" tall by 8-3/4" wide (measured from center of hinge pin).
 
• Vertical strap measures 4-3/4" tall by 1-1/4" wide.
 
• Hinge pin rides on a black nylon bushing to eliminate binding and for ease of operation.
 
• Each hinge uses 6 each 5/16" stainless lag screws (not included but offered for purchase during checkout).

 
• Polished Stainless Steel

 
• Stainless steel strap hinge made for surface mounted installations.
 
• Hinge measures 3-1/8" tall by 5" wide.
 
• Made from type 304 stainless steel.
 
• Each hinge uses 4 each #14 pan head screws (not included but offered for purchase during checkout).

 
• Natural Stainless Steel

 
• Heavy duty strap hinge for gates, truck doors or anywhere a heavy duty stainless steel strap hinge is needed.
 
• Made for surface mounted flush installation.
 
• Made from 0.197" thick stainless steel.
 
• Horizontal strap measures 2.5" tall by 7-3/8" wide (measured from center of hinge pin).
 
• Vertical strap measures 4-1/8" tall by 2-1/4" wide (measured from center of hinge pin).
 
• Hinge pin is removable (held in place by a circlip). Hinge pin features a zerk fitting to allow lubrication.
 
• Each hinge uses 6 each 5/16" lag screws (not included but offered for purchase during checkout).

 
• Polished Stainless

 
• Beautifully polished stainless steel strap hinge, made from Type 304 stainless steel.
 
• Horizontal strap measures 3.5" from center of hinge pin to end of strap.
 
• Vertical strap measures 2-1/4" tall by 1-3/8" from center of hinge pin to edge of strap.
 
• Thickness is 0.135".
 
• Hinge is designed for flush installation (surface mounted).
 
• Each hinge uses 4 each #14 pan head screws (not included but offered for purchase during checkout).

 
• Polished Stainless Steel

 
• Decorative Tee strap for gates, large cabinets and full size doors.
 
• Tee strap measures 6" wide by 6" tall by 3/4" wide by 5/32" thick.
 
• Made from steel base material.
 
• Matching wood screws are included.

 
• Hammered Black

 
• Decorative "L" strap for gates, large cabinets and full size doors.
 
• Each leg of the "L" strap measures 6" by 3/4" wide by 5/32" thick.
 
• Made from steel base material.
 
• Matching wood screws are included.

 
• Hammered Black

 
• Decorative angled "L" strap for gates, large cabinets and full size doors.
 
• Each leg of the "L" strap measures 6" by 3/4" wide by 5/32" thick.
 
• Made from steel base material.
 
• Matching wood screws are included.

 
• Hammered Black

 
• Decorative arch strap for gates, large cabinets and full size doors.
 
• Strap measures 17" by 3/4" wide by 5/32" thick.
 
• Made from steel base material.
 
• Matching wood screws are included.

 
• Hammered Black

 
• Click on the link below to go to our main Strap Hinge section where you will find our complete selection of Strap Hinges.

 
• Heavy duty ornamental style Tee hinges, available in 2 sizes, a 10" model and a 12" model.
 
• The 10" model is made from 1/8" thick steel. The 12" model is made from 3/16" steel.
 
• The pad dimensions refer to the vertical leaf of the hinge. The strap dimensions refer to the horizontal leaf of the hinge.
• The "Open Width" is the total overall width of the hinge as shown in the photo measuring from left to right.
 
• Hinge pin is non-removeable.
 
• Weight ratings listed are for a pair of hinges.
 
• Durable powder coating, made from steel base material, matching lag screws are included.

 
• Flat Black

 
• decorative style
 
• special bearing for extended life
 
• great for use on ornamental gates and mini-barns
 
• strap length measured to center of knuckle
 
• complete with screws
 
• steel base material

 
• Black Coated

 
• For wood, metal or vinyl gates
 
• Adjustable self closing gate hinge
 
• Made from glass fiber reinforced polymer (UV stabilized)
 
• Will not rust and never needs lubrication
 
• Internal stainless steel torsion spring
 
• Spring tension is incrementally adjustable with a screwdriver
• Hinge measures 7-3/4" tall by 9" wide
 
• Sheet metal screws are included
 
• Self closes light to medium weight gates up to 55lbs per pair of hinges
 
• Weight rating is based on a maximum gate size of 5' tall by 3' wide.

 
• Flat Black

 
• Light duty.
 
• Can be used indoors or outdoors.
 
• Ideal for small shed doors, tool boxes, and storage chests.
 
• Base material is steel, zinc plated for corrosion resistance.
 
• Strap length measured to center of knuckle.
 
• Uses flat head screws (not included). Screw size and quantity are listed below.
 
• Flat head screws are offered for purchase during checkout

 
• Heavy duty tee hinges.
 
• Special bearing increases life expectancy.
 
• Base material is steel, zinc plated for corrosion resistance.
 
• Strap length measured to center of knuckle
 
• Uses flat head screws (not included). Screw size and quantity are listed below.
 
• Flat head screws are offered for purchase during checkout

 
• zinc plated

• steel base material
• durable black finish
• self closing
• fully adjustable
• non-handed
• complete with lag screws

• Black Coated

 
• Stainless steel is recommended for vinyl, redwood, cedar and ACQ (treated) lumber.
 
• Excellent for use anywhere corrosion is a problem or the look of stainless steel is desired.
 
• Heavy duty construction.
• Made from solid stainless steel (Type 304)
 
• Strap length is measured from the tip of the strap to the far end of the hinge pin barrel.
 
• Pad width is measured from the edge of the pad to the inside edge of the hinge pin barrel.
 
• Strap width means widest part of strap.
 
• Stainless steel screws are included.

 
• Satin Stainless Steel

• steel base material
• durable black finish
• reversible pin for right or left hand applications
• complete with lag screws

• Black Coated

• steel base material
• durable black finish
• reversible pin for right or left hand applications
• complete with lag screws

• Black Coated

• steel base material
• durable black finish
• self-closing
• fully adjustable
• extra heavy gauge steel
• reversible
• complete with lag screws

• Black Coated

 
• solid cast brass hinge with a natural rough finish
 
• hinge should be used where it’s rough look is appropriate
 
• strap length is 6” to center of knuckle
 
• thickness of the strap starts at 3/16" and tapers to 1/8" at its end
 
• uses #12 screws not included - screws are offered for purchase during checkout

 
• Natural

 
• heavy duty cast brass hinge
 
• 3 knuckle construction
 
• brass pin
 
• beautifully polished
 
• best quality
 
• made in USA
 
• complete with screws

 
• 605(US3)Polished Brass

 
• Tee hinge is made from solid brass.
 
• Three knuckle construction and made with a solid brass hinge pin.
 
• The "Open Width" is the total overall width of the hinge as shown in the photo measuring from left to right.
 
• The pad length is the top to bottom measurement of the left hand hinge leaf as shown in the photo.
 
• The pad width is the width of the left hand hinge leaf as shown in the photo.
 
• Uses flat head screws (not included but offered for purchase during checkout). The screw size used is listed next to the SKU number of the hinge.
 
• PLEASE NOTE; the photo to the left shows the hinge in a polished brass finish. The polished brass finish is no longer available. We have limited availability on the polished chrome finish hinge.

 
• Polished Chrome

 
• Decorative tee hinge has flat black powder coating.
 
• Made from 1/8" thick steel.
 
• Hinge pin is reversible for left hand or right hand installation.
 
• Pad length and width dimensions refer to the vertical leaf shown in the photo. Strap dimensions refer to the horizonal leaf.
 
• Comes complete with black lag screws.

 
• Flat Black

 
• Hinge measures 5" wide in the open position.
 
• Narrow leaf measures 4.5" tall by 2" wide.
 
• Wide leaf measures 3-1/4" tall by 3" wide.
 
• Joint length is 4-3/4".
 
• Weight rating is 50lbs per hinge.
 
• Uses #10 wood screws. Not included but offered for purchase during checkout.
 
• SKU 215422 is a heavy galvanized finish, excellent for use on a sea coast or with redwood or treated lumber. The galvanized model has a solid brass hinge pin for extra corrosion resistance.
 
• Steel base material.

 
• Black coated
 
• Galvanized
 
• Zinc Chromate

 
• Beautifully finished tee hinges with heavy black powder coating.
 
• Made from 1/8" thick steel.
 
• Strap length is measured to the center of the hinge pin.
 
• Matching flat head screws are included.

 
• Black Powder Coated

 
• Hinge measures 5" wide in the open position.
 
• Narrow leaf measures 4.5" tall by 2" wide.
 
• Wide leaf measures 3-1/4" tall by 3" wide.
 
• Joint length is 4-3/4".
 
• Weight rating is 50lbs per hinge.
 
• Uses #10 wood screws. Not included but offered for purchase during checkout.
• Steel base material.
 
• PLEASE NOTE: This hinge is sold in a package of 10 hinges at a discounted price over buying them individually. It is the same hinge as our SKU 215421.

 
• Zinc Chromate

 
• These hinges are sold by the pair. A pair includes one spring hinge and one non-spring hinge.
 
• Hinge measures 5.5" wide by 4" tall. Narrow leaf is 2" wide and wide leaf is 3.5" wide.
 
• For gates up to 50lbs in weight.
 
• Spring tension is adjustable with allen wrench (included).
 
• Matching screws are included.

 
• Black
 
• Zinc Chromate

 
• Stainless steel hinge for use near marine environments or anywhere the look of stainless steel is desired.
 
• Stainless steel is recommended for vinyl, redwood, cedar and ACQ (treated) lumber.
 
• Hinge measures approximately 4.25" tall by 5" wide.
 
• Short leaf is 1-9/16" wide. Long leaf is 3-3/8" wide.
 
• Stainless steel fasteners are included.

 
• Satin Stainless Steel

 
• Click on the link below to go to our main Tee Hinge section where you will find our complete selection of Tee Hinges.

   
• J-Bolt pivot hinge is a very heavy duty hinge specially made for heavy gates and doors.
 
• This hinge will swing a full 180 degrees if installed without a stop.
 
• Hinge is made up of a mounting plate (flange)which attaches to the wall or post and the J-Bolt arm which attaches to the gate.
 
• Hinge pivots on a steel ball bearing and includes a grease fitting to keep the bearing lubricated.
 
• Mounts with 3/8" lag screws or bolts (not included).
 
• The minimum gap between the post and edge of gate frame is 1-7/8" for SKU 783000 and 2-1/2" for SKU 783002.
 
• The maximum spread between the two nuts on the threaded part is as follows; for the 783000 it is 3", for the 783002 it is 4".
 
• The thread size on our SKU 783000 is 5/8 x 11. The thread size on our SKU 783002is 3/4 x 10.
 
• Weight rating is for 2 hinges.

 
• Black Coated

 
• Super heavy duty weld-on pivot hinge for very heavy gates.
 
• Hinge measures 7" tall by 2.5" in diameter. Each weld-on plate measures 2.75" tall by 2" wide.
 
• The hinge pin is made from stainless steel, is 1.25" in diameter and rides on a 1" diameter ball bearing.
• Barrels are made from cold rolled carbon steel.
 
• Maximum gate weight is 3000 lbs per pair of hinges.
• Includes a "zerk" type fitting so that the hinge may be lubricated with a grease gun.
 
• Hinges are made in the U.S.A.
 
• These hinges are sold by the pair which means two hinges. A pair is normally what you need to hang one gate. A pair of these hinges weighs about 22 lbs.

 
• Painted Black

 
• Pivot type welding hinge with roller bearings.
 
• Available in a 3" or a 4" size.
 
• The 3" size has a sealed roller bearing that measures 1-3/8" outside diameter by .622" inside diameter by .43" thick. Uses a 1/2" x 4" pivot bolt. Post side welding plate measures 1.5" x 3.5". Gate side welding plate measures 1.5" x 2.75". The spacing between the gate and post is 2.71".
 
• The 4" size has a sealed roller bearing that measures 1.849" outside diameter by .786" inside diameter by .55" thick. Uses a 5/8" x 5" pivot bolt. Post side welding plate measures 2" x 4.25". Gate side welding plate measures 2" x 3.25". The spacing between the gate and post is 4.25".
 
• Both hinges feature a 220 degree swing range. Both hinges use a nylon locking nut on the bottom of the pivot bolt.
 
• Made from steel base material.
 
• These hinges are sold by the pair which means two hinges. A pair is normally what you need to hang one gate.
• Weight ratings are based on using a pair of hinges.
 
• Hinges are made in the U.S.A.

 
• Painted Black

 
• Weld-on barrel hinge is a lift off pivot hinge.
 
• Features a round barrel body.
 
• Made from steel base material.
 
• Hinge pin is made from stainless steel.
 
• Hinge pin pivots on a ball bearing.
 
• Features a "zerc" type grease fitting.
 
• The hinge pin is fixed in one of the barrels. In the photo to the left the barrel with the fixed hinge pin is the barrel on top.
 
• The "Hinge Gap" is the distance between the post and the gate after the hinge is installed.
 
• Each hinge has 2 weldable plates. Each plate measures as follows; SKU 782000 measures 1" x 2" x 3/8" and SKU 782002 measures 1-1/2" x 3" x 3/8".
 
• SKU #782000 use for gates up to 8-10 feet wide
 
• SKU #782002 use for gates up to 15-17 feet wide

 
• Spring gate pivot hinge is a double acting hinge.  Hinge swings both directions and returns to center.
 
• Spring tension is adjustable.
 
• Hinge is not handed, works on both right and left hand doors.
 
• Hinge does not have the "hold open" feature.
 
• Maximum door width is 36”.
 
• Maximum door thickness is 2-1/2".
 
• Maximum door weight is 75 lbs.
 
• This hinge requires a minimum clearance of 4.5" from the bottom of the door to the floor and a minimum clearance of 1/2" from the top of the door to the door jamb.
 
• Picture to left shows one set (top and bottom pivot).
 
• Base material is malleable iron base.
 
• Screws are included.

 
• Primed for painting  600 (USP)
 
• Satin brass 633 (US4)
 
• Satin chrome 652 (US26D)

 
• Click on the link below to go to our Bolt, Screw, Strap & Pintle Hinge section where you will find more pivot type hinges for gates.

 
• Tru-Close heavy duty round post hinges are designed to fit a wide range of common round-posted gates and fences.
 
• Creates a self-closing gate where no gate closer is necessary. The spring tension is easily adjustable.
 
• Fits post diameters of 1-7/8" to 2" and 2-3/8" and 2-7/8".
 
• Fits gate frame diameters of 1-3/8" and 1-5/8".
 
• Made from a high tech polymer (UV stabilized) for excellent weather resistance. Springs and internal parts are stainless steel. Hinge is self lubricating.
 
• Hinge accomodates a gap between the fence and post from 3/4" to 1-3/8".
 
• Hinge measures approximately 5" tall by 4" wide.
 
• Each pair of hinges is packaged as a kit which includes shims, adapters, instructions and fastening screws.
 
• These hinges have been independently tested to comply with strict safety standards, especially those relating to stringent swimming pool safety codes (always check with your building department for your local building code requirements)

 
• Flat black

 
• Tru-Close heavy duty round post hinges are designed to fit a wide range of common round-posted gates and fences.
 
• Creates a self-closing gate where no gate closer is necessary. The spring tension is easily adjustable.
 
• Fits post diameters of 1-7/8" to 2" and 2-7/8".
 
• Fits gate frame diameters of 1-7/8" to 2".
 
• Made from a high tech polymer (UV stabilized) for excellent weather resistance. Springs and internal parts are stainless steel. Hinge is self lubricating.
 
• Hinge accomodates a gap between the fence and post from 3/4" to 1-3/8".
 
• Hinge measures approximately 5" tall by 4-1/2" wide.
 
• Each pair of hinges is packaged as a kit which includes shims, adapters, instructions and fastening screws.
 
• These hinges have been independently tested to comply with strict safety standards, especially those relating to stringent swimming pool safety codes (always check with your building department for your local building code requirements)

 
• Flat black

 
• TruClose heavy duty spring gate hinge, designed for wood or vinyl gates.
 
• For gate weights up to 132 lbs.
 
• Spring loaded for self closing gates. Hinge spring is adjustable.
 
• Hinge measures approximately 7" wide by 5" tall.
 
• Features 3-way adjustability; spring tension, vertical adjustment and horizontal adjustment. Both vertical and horizontal adjustment is up to 3/4".
 
• The ideal gap between the fence and post is 1", but the hinge will work with gaps that range from 5/8" to 1-3/8".
 
• Features side fixing legs for a more secure attachment.
 
• Features tough molded polymer construction with stainless steel torsion spring.
 
• All fasteners are included.

 
• Flat Black

 
• For wood or vinyl gates
 
• Adjustable self-closing gate hinge
 
• Made from glass-fiber reinforced polymer (UV stablilized)
 
• Will not rust and never needs lubrication
 
• Internal stainless steel spring
 
• Spring tension is incrementally adjustable with a screwdriver
• Hinge measures 3-3/4" tall by 5-1/4" wide
 
• Self closes light to medium weight gates up to 55lbs per pair of hinges
 
• Weight rating is based on gate maximum size of 5' high by 3' wide
 
• Uses #10 Round head wood screws (not included). Round head stainless steel screws are offered for purchase during checkout.
 
• These hinges have been independently tested to comply with strict safety standards, especially those relating to stringent swimming pool safety codes (always check with your building department for your local building code requirements)

 
• Flat Black

 
• For gates made from metal square tubing
 
• Hinge is adjustable and self closing
 
• Made from glass-fiber reinforced polymer (UV stabilized)
 
• Will not rust and never needs lubrication
 
• Internal stainless steel spring
 
• Spring tension is incrementally adjustable with a screwdriver
• Hinge measures 3-3/4" tall by 2-1/2" wide
 
• Self closes light to medium gates up to 55lbs per pair of hinges
 
• Weight rating is based on gate maximum size of 5' high by 3' wide
 
• Uses #10 Round head screws (not included). Stainless steel screws are offered for purchase during checkout.
 
• These hinges have been independently tested to comply with strict safety standards, especially those relating to stringent swimming pool safety codes (always check with your building department for your local building code requirements)

 
• Flat Black

 
• For wood, metal or vinyl gates
 
• Adjustable self closing gate hinge
 
• Made from glass fiber reinforced polymer (UV stabilized)
 
• Will not rust and never needs lubrication
 
• Internal stainless steel torsion spring
 
• Spring tension is incrementally adjustable with a screwdriver
• Hinge measures 7-3/4" tall by 9" wide
 
• Sheet metal screws are included
 
• Self closes light to medium weight gates up to 55lbs per pair of hinges
 
• Weight rating is based on a maximum gate size of 5' tall by 3' wide.

 
• Flat Black

 
• Self closing hinge for heavy or high traffic metal gates.
 
• Tough polymer molded construction with stainless steel torsion spring. Spring tension is adjustable with a screwdriver.
 
• Hinge measures 5" tall by 3-1/2" wide.
 
• Hinge is weight rated for a maximum gate weight of 132lbs per pair of hinges
 
• Weight rating is based on a maximum gate size of 6' high by 4' wide
 
• Uses #12 Round head screws (not included). Stainless steel screws are offered for purchase during checkout.
 
• This model hinge has side legs which wrap around the fence post and edge of gate 1" for added strength

 
• Flat Black

 
• Hinge is adjustable vertically, horizontally and for spring tension.
 
• Hinge measures 3-3/4" high by 4" wide
 
• Will work for gates with a gap of up to 2"
 
• Self closing hinge for gates weighing up to 55lb
 
• Weight rating is based on gate maximum size of 5' high by 3' wide (per pair of hinges)
• Molded polymer construction with stainless steel torsion spring
 
• Spring tension is easily adjustable with a screwdriver
• Hinge has side legs which wrap around the fence post and edge of gate 1" for added strength
 
• Instructions and mounting screws are included

 
• Flat Black

 
• For wood, metal or vinyl gates.
 
• Adjustable self-closing gate hinge.
 
• Made from glass-fiber reinforced polymer (UV stablilized).
 
• Will not rust and never needs lubrication.
 
• Internal stainless steel spring.
 
• Spring tension is incrementally adjustable with a screwdriver.
• Hinge measures 5" tall by 5" wide.
 
• Self closes heavy gates up to 132lbs per pair of hinges
 
• Available in two models. SKU 928110 has alignment legs which fix the gap between the post and gate at 3/4". The alignment legs are 1-1/4" in depth and are attached at right angles to the hinge leaves. SKU 928115 has no alignment legs so the gap is variable.
 
• Weight rating is based on gate maximum size of 6' high by 4' wide
 
• Uses #12 Pan head wood screws (not included). Pan head stainless steel screws are offered for purchase during checkout.
 
• These hinges have been independently tested to comply with strict safety standards, especially those relating to stringent swimming pool safety codes (always check with your building department for your local building code requirements)

 
• Flat Black

 
• Spring tension is adjustable.
 
• Made from glass-fiber reinforced polymer (UV stabilized).
 
• Hinge pin and spring is made from stainless steel.
 
• For lightweight gates weighing a maximum of 26lbs.
 
• Hinge measures 4-3/8" tall by 3-1/4" wide.
 
• Hinge has 2 attachment legs (1" and 1.5") which create a fixed gap of 3/4" between the gate post and the gate.
 
• Uses #12 Pan head screws (20 screws per pair). Screws are not included but are offered for purchase during checkout.

 
• Flat Black

 
• surface applied to gate and jamb
 
• non-adjustable tension
 
• steel
 
• domestic
 
• complete with wood screws (#7 x 3/4”)

*Maximum door weight (lbs.)

 
• 601 (US1B) bright black japanned
 
• 633 (US4) satin brass plated
 
• 600 (USP) prime coated

 
• non-handed
 
• steel material
 
• easily adjusted spring tension
 
• screw hole pattern conforms to ANSI specifications for template hinges
 
• pivot point aligns with non-spring hinges of the same size
 
• screws are included

Maximum door weight using three spring hinges

 
• 3-1/2” - 90 lbs.
 
• 4” - 110 lbs.
 
• 4-1/2” - 150 lbs.

 
• 632 (US3) bright brass plated
 
• 633 (US4) satin brass plated
 
• 600 (USP) primed for painting
 
• 640 (US10B) oil rubbed bronze
 
• 646 (US15) satin nickel plated
 
• 652 (US26D) satin chromium plated
 
• 651 (US26) bright chromium plated
 
• 643 (US11) satin bronze plated, blackened, satin relieved, clear coated (similar to oil rubbed bronze, but on steel)

 
• These hinges allow door to open 180 degrees in either direction and spring action returns door to center closed position.
 
• These hinges are also known as "Saloon Door Hinges".
• Spring tension is adjustable.
• The satin brass finish is the most popular finish. The photo to the left shows the zinc chromate finish.
• The manufacturer recommends using three hinges per door. The center hinge should be installed as close as possible to the top hinge for maximum support.
 
• Steel base material.
 
• All are domestic products except those with a SKU number that starts with 814.
 
• Complete with wood screws.
 
• #814036 through #814040 are imported and are not weight rated.
 
• "Size" is the height of the plate that mounts on the door and jamb.

*Maximum door weight (lbs.) using three spring hinges

 
• 633 (US4) satin brass plated.
 
• 603 (US2G) zinc chromate plated.
 
• 600 (USP) primed for painting.

 
• Combination corner hinge: one leaf has square corners, one leaf has 5/8" radius corners
 
• steel base material
 
• easily adjusted spring tension
 
• pivot point of hinge aligns with non-spring hinges of the same size
 
• matching wood and machine screws are included

 
• 633 (US4) Satin Brass
 
• 600 (USP) Prime Coated
 
• 646 (US15) Satin Nickel
 
• 640 (US10B) Oil Rubbed Bronze

 
• Non-template hinge, for wood doors. Hinges have screwholes but are also weldable for metal gates.
 
• Pivot points do not align with standard full mortise hinges. These hinges cannot be mixed with other types of hinges on the same door.
 
• Large diameter barrel matches older style single acting pivot hinges.
 
• Steel base material.
 
• The 3” hinge comes with wood screws.
 
• The 6” and 7" size come with machine screws.
 
• The "Size" dimension is the height of the plate that mounts on the door and jamb.
 
• The 3" hinge maximum door weight is 45lbs using 2 hinges and 65lbs using 3 hinges.
 
• The 6" hinge maximum door weight is 125lbs using 2 hinges and 155lbs using 3 hinges.
 
• The 7" hinge maximum door weight is 130lbs using 2 hinges and 175lbs using 3 hinges.

 
• 601 (US1B) bright black japanned
 
• 600 (USP) primed for painting.

 
• This hinge has a reverse action spring which means that the spring action works to open the door rather than close the door.
 
• Non-template hinge, for wood doors. Hinges have screwholes but are also weldable for metal gates.
 
• Pivot points do not align with standard full mortise hinges. These hinges cannot be mixed with other types of hinges on the same door.
 
• Steel base material.
 
• Wood screws are included on the 3" size.
 
• Machine screws are included on the 6" size.
 
• The "Size" dimension is the height of the plate that mounts on the door and jamb.
 
• The 3" hinge maximum door weight is 45lbs using 2 hinges and 65lbs using 3 hinges.
 
• The 6" hinge maximum door weight is 125lbs using 2 hinges and 155lbs using 3 hinges.

 
• 652(US26D) Satin Chrome
 
• 601(US1B) Bright Black Japanned

 
• Spring hinges made from stainless steel.
 
• Spring tension is adjustable.
 
• Screw hole patterns conform to ANSI specifications for template hinges.
 
• Pivot point aligns with non-spring hinges of the same size.
 
• Screws are included.
 
• Photo to left shows hinge with the Bronze finish.
 
• PLEASE NOTE: Some of the models have a stainless steel spring and some of the models have a steel spring. The steel spring is coated with laquer which will offer protection  but will eventually rust.

Maximum door weight using three spring hinges

 
• 3-1/2” - 90 lbs.
 
• 4” - 110 lbs.
 
• 4-1/2” - 150 lbs.

 
• Bronze
 
• Satin Stainless Steel

 
• steel base material
 
• durable black finish
 
• self closing
 
• fully adjustable
 
• non-handed
 
• complete with lag screws

 
• Black Coated

 
• These hinges are sold by the pair. A pair includes one spring hinge and one non-spring hinge.
 
• Hinge measures 5.5" wide by 4" tall. Narrow leaf is 2" wide and wide leaf is 3.5" wide.
 
• For gates up to 50lbs in weight.
 
• Spring tension is adjustable with allen wrench (included).
 
• Matching screws are included.

 
• Black
 
• Zinc Chromate

 
• Black decorative heavy duty spring tee hinge for gates.
 
• Horizontal strap measures approximately 2" wide by 8" long.
 
• Vertical strap measures approximately 1-3/8" by 7-3/8" tall.
 
• Hinge is sold by the pair which is normally what you need to hang one gate.
 
• Both hinges in the pair are spring loaded and the spring tension is adjustable.
 
• Steel base material and matching hex head lag screws are included.

 
• Black coated

 
• A cane bolt can be used to secure one of the gates when you have a double gate. Once the first gate is secured, the second gate can be latched to the first gate with a gate latch.
 
• A cane bolt can also be used to secure any gate in the open position.
 
• Made from 1/2" steel and available in powder coated black or galvanized.
 
• Our galvanized coating is a true heavy galvanized coating, not the typical light zinc chromate plating.
 
• Comes with two hanging guides and a strike plate.
 
• Fasteners are included.

 
• Black
 
• Galvanized

 
• Heavy duty cane bolt.
 
• Made from 5/8" diameter steel.
 
• Coated with a durable black powder coating.
 
• The 24" size comes with matching wood screws, two hanging guides, a round strike and a hanger for holding the cane bolt in the "up" position.
 
• The 36" and 48" size comes with matching wood screws, four hanging guides, a flat rectangular strike and a hanger for holding the cane bolt in the "up" position.

 
• Black

 
• Heavy duty cane bolt for all metal, wood or vinyl gates. Ideal for double driveway gates.
 
• Lokk Bolt is made by D & D Technologies.
• "Metal Model" is for metal gates. "Wood/Vinyl Model" is for wood or vinyl gates.
• Made from tough polymer construction
• Built in keyed lock. Can be re-keyed by a locksmith to any Kwikset type key.
• Rod is 24" in length, 1/2" in diameter and made from 316 grade stainless steel
• Bolt retention groove keeps the bottom of the cane bolt from dragging across your driveway.
 
• Cane bolts are not handed. They will work on both left hand and right hand opening gates.
• Comes complete with all fasteners and 2 keys.

 
• Flat Black

 
• For gates or doors around a pool, in a marine or corrosive environment, or for a satin nickel or stainless steel look.
 
• Made from 18-8 stainless steel
 
• Bolt is 24" in length and 5/8" in diameter.
 
• Supplied with two guides and a hanger made from 11 gauge stainless.
 
• Uses 6 each #14 Pan head screws (not included). Stainless steel screws are offered for purchase during checkout.

 
• Mill finish

 
• Solid bronze cane bolt for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Cane bolt measures 20" tall. Mounting plates measure 2" by 4".
 
• Cane bolt features a large diameter 5/8" bolt.
 
• Wood screws and a keeper for the bottom of the bolt are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. This means that it changes over time in a way that most people find desirable. When bronze is exposed to air it will tarnish quickly and turn brown. When bronze is exposed to exterior elements it will turn green. This condition is known as "patina". This is also considered desirable by most people. These conditions are not considered "defects" but are part of the natural beauty of bronze.

 
• Solid Natural Bronze

 
• Heavy duty cane bolt (gate anchor) for livestock and other gates.
 
• Cane bolt features a spring loaded brake which will hold the cane bolt in any position. This can be used to keep the gate from swinging or sagging. To release the bolt simply push down on the lever.
 
• Bolt measures 17" tall by 1" diameter.
 
• Mounting plate measures 4-3/4" tall by 3-1/2" wide. Will mount to flat gate frame or 2" diameter round gate frame.
 
• U-bolts, nuts and washers are included for mounting to round gate frame. Fasteners for mounting to a flat gate frame are not included.
 
• Made from steel base material.
 
• PLEASE NOTE: green gate tubing shown in photo is for illustrative purposes and is not included with cane bolt.

 
• Zinc Chromate (plate) and Yellow Zinc (bolt)

 
• Cane bolt is used to secure gates and doors in closed position
 
• Matches our black iron hardware
 
• Comes with 3 different strikes for mounting on edge, surface or jamb
 
• Throw of bolt is 1-1/2"
 
• Cane bolt mounting plate measures 6" x 1-1/2"
 
• Overall length of cane bolt is 14"
 
• Matching black screws are included

 
• Black Iron

 
• Cane bolt is used to secure gates and doors in closed position
 
• Cane bolt is 18" long (22" including handle)
 
• Matches our other black iron and heart design hardware
 
• Installs with two black screw eyes and six black wood screws (included)
 
• Comes with a cup type strike
 
• The throw of the cane bolt is determined by where you install the top heart

 
• Black Iron

 
• Cane bolt is used to secure gates and doors in closed position
 
• Matches our black iron hardware
 
• Comes with four different strikes for mounting on edge, surface, jamb or floor
 
• Throw of bolt can be varied depending on installation
 
• Matching black wood screws are included
 
• Overall length of cane bolt is 22-3/4"
 
• Mounting plates are 4" x 1-1/2"

 
• Black Iron

 
• Gate wheel helps support unhinged end of gate.
 
• Wheel is 2-3/4" diameter and made of hard plastic. Wheel width is 1-1/4".
 
• Overall top to bottom measurement is 16".
 
• Wheel is attached to a ball bearing swivel for ease in rolling.
 
• Approximate 50 lbs capacity.
 
• Mounting plate is undrilled. Holes may be added by installer or it may be welded in place. Mounting plate measures 1-3/8" by 9-3/8" by 1/8".
 
• Maximum spring travel is 1".
 
• Made from steel and unfinished. Should be painted after installation.
 
• If installing on a wood gate, 5/16" lag screws are recommended and offered for purchase during checkout.

 
• Unfinished

 
• Gate wheel helps support the unhinged end of larger gates.
 
• Mounts to either the front or back side of the gate.
 
• Spring loaded to help absorb bumps in surface under gate.
 
• Features ball bearings, hard rubber wheel and a heavy duty spring.
 
• Mounting plate measures 2" wide by 5" high.
 
• Made from steel base material.
 
• Wheel diameter is 2-1/2". Overall height of product is 10-1/2".
 
• Wheel is attached to a swivel for ease of rolling.
 
• 75lbs load capacity
 
• Maximum spring travel is 1-1/2"
 
• This product uses 5/16 lag screws (not included). Lag screws are offered for purchase during checkout. Order 4 screws per gate wheel.

 
• Zinc Chromate plated

 
• Gate wheel helps support unhinged end of large gates.
 
• Thick galvanized finish (true galvanizing not a thin zinc plating).
 
• Non-swiveling for extra strength.
 
• Made from steel base material.
 
• Approximate 88lb load capacity.
 
• Wheel diameter is 4". Width is 1-1/8".
 
• Top to bottom measurement is 14.5".
 
• Mounting plate measures 1.5" x 6.5"
 
• Maximum spring travel is 2.5"
 
• Includes 2 each 3/8" x 4" galvanized carriage bolts, nuts and washers.

 
• Galvanized

 
• Gate wheel attaches to gates that have a round gate frame.
 
• Fits gate tubing sizes 1-5/8" to 2" (outside diameter).
 
• Wheel diameter is 8". Wheel width is approximately 1-3/4". Wheel has a steel center and is made from solid rubber.
 
• Includes U-shaped attachment plate for 2" O.D. tubing with adapters for 1-5/8" O.D. tubing. Also included are carriage bolts and nuts.
 
• The addition of this gate wheel to your gate will add approximately 2.5" to the end of your gate.
 
• PLEASE NOTE; green gate tubing shown in photo is for illustrative purposes and is not included with gate wheel.

 
• Zinc Chromate Plated

 
• Stainless steel spring gate closer. For use in marine environments or anywhere the look of stainless steel is desired.
 
• Safe for use on redwood, cedar, vinyl and treated lumber (ACQ Lumber).
 
• Works for both right hand and left hand opening gates.
 
• Torque is adjustable.
 
• Installs on the same side of the gate as the hinges. In the case of full mortise butt hinges it installs on the same side of the gate as the hinge pins.
 
• Stainless steel screws are included.

 
• Stainless Steel

 
• Ornamental gate spring closes gate automatically
 
• Works for both right or left hand opening gates
 
• Torque is adjustable
 
• Matching wood screws are included
 
• Spring closer installs on the same side of the gate as the hinges (or hinge pin for full mortise hinges)
 
• Steel base material

 
• Black coated
 
• White coated

 
• Kant Slam Manufacturing Company.
 
• Closes large or small gates up to 150 lbs, easily, gently, smoothly
 
• Will not slam your gate
 
• Complies with most pool gate legislation restrictions (check your local ordinance)
 
• Adjusting screw regulates closing speed
 
• Installs on side, top, middle or bottom of right or left hand gate
 
• Mounts on opening side of door
 
• Kant Slam closer has a maximum opening angle of 90 degrees. The manufacturer recommends the use of a stop at 90 degrees to prevent damage to the Kant Slam closer.
 
• Hydraulic action gives ample closing force at the latching point
 
• Overall dimensions 7-1/2" high, 13" wide, 2-1/2" deep
 
• Mounting bracket measures 3-1/4" by 1-3/4"
 
• Steel base material
 
• Screws are included

 
• Black coated

 
• GC-2000 Gate Closer for gates up to 120 lbs and maximum gate width of 3'3".
 
• The GC-2000 offers a small profile compared to most gate closers.
 
• Easy installation. Closer has long service life. Tested to over 100,000 operations.
 
• Designed for metal gates but also works well on wooden gates.
 
• Two speed closing slows gate speed as gate approaches post.
 
• Maximum gate opening is 90 degrees. IMPORTANT; A gate stop must be installed to limit gate swing to 90 degrees.
 
• Made for use on gates which are hinged by butt hinges or surface mounted strap hinges.
 
• Installation fasteners are included.

 
• Black semi-gloss coating.

 
• Three head types available: Flat Head (countersunk) and Pyramid Head and Oval Head (countersunk)
 
• Flat black finish matches Forged Iron Hardware
 
• Made of steel base material

 
• Black

 
• Gate grille covers up a speakeasy opening on your gate or door.
 
• Grille measures 12" wide by 14-1/2" tall. Projects 4-1/2" from surface of gate or door.
 
• Made from steel base material.
 
• Fasteners are included.
 
• PLEASE NOTE: These grilles are handmade and dimensions may vary slightly from those listed

 
• Black wrought iron

 
• Gate grille covers up a speakeasy opening on your gate or door.
 
• Grille measures 12" wide by 14-1/4" tall. Projects 2" from surface of gate or door.
 
• Made from steel base material.
 
• Fasteners are included.
 
• PLEASE NOTE: These grilles are handmade and dimensions may vary slightly from those listed

 
• Black wrought iron

 
• Solid bronze pull for gates and doors for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Available in two lengths; 12.5" and 17.5".
 
• The 12.5" size has a screw hole center to center dimension of 11.5".
 
• The 17.5" size has a screw hole center to center dimension of 16.5".
 
• Attachment screws are included (Stainless steel flat head 5/16" diameter machine screws). Please specify in the comment section when you check out whether you would like your attachment screws 1-3/4" in length or 2-1/2" in length.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. This means that it changes over time in a way that most people find desirable. When bronze is exposed to air it will tarnish quickly and turn brown. When bronze is exposed to exterior elements it will turn green. This condition is known as "patina". This is also considered desirable by most people. These conditions are not considered "defects" but are part of the natural beauty of bronze.
 
• PLEASE NOTE: We can special order these pulls so that you can mount one on each side of your door with no mounting hardware or screws visible (known as "back-to-back mounting").  Please call if you wish to order "back-to-back" mounting. We will need to know your door thickness.  There is an additional charge of $30.00 for two pulls set up for "back-to-back mounting".

 
• Solid Natural Bronze

 
• Gate grille covers up a speakeasy opening on your gate or door.
 
• Grille measures 12" wide by 15-5/8" tall. Projects 2" from surface of gate or door.
 
• Made from steel base material.
 
• Fasteners are included.
 
• PLEASE NOTE: These grilles are handmade and dimensions may vary slightly from those listed

 
• Black wrought iron

 
• Solid Bronze lever turn for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Lever turn can be combined with a spring latch (our SKU 634014) and spindle (our SKU 634004) to create a gate latch.
 
• To create a gate latch purchase a Right Hand lever turn and a Left Hand lever turn (one for the front and one for the back of the gate or door), one spindle and one spring latch per gate or door.
 
• Lever turn shown in photo is Left Hand model.
 
• Lever turn back plate measures 9-3/4" tall and 2-3/4" wide. Lever projection is 3-1/4".
 
• Spring latch fits into a 1" diameter hole drilled into the edge of the door. Spring latch backset (distance from the edge of the door to the center of the spindle hole) is 2-3/4".
 
• Spring latch bolt protrudes a maximum of 7/16" (similiar to the spring latch on a typical front door). Spring latch includes a solid brass trim piece for the edge of the door and a solid brass strike plate, both pieces are oil rubbed bronze finish. Also included with spring latch are fasteners, paper installation template and a dust box. Spring latch contains some steel internal parts.
 
• Spindle is 5" long by 5/16" square. Can be used on a maximum 3" thick door. For narrower doors it can easily be cut down with a hacksaw. Spindle is made from steel with a yellow zinc plating.
 
• Mounting screws are included with the lever turn.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. This means that it changes over time in a way that most people find desirable. When bronze is exposed to air it will tarnish quickly and turn brown. When bronze is exposed to exterior elements it will turn green. This condition is known as "patina". This is also considered desirable by most people. These conditions are not considered "defects" but are part of the natural beauty of bronze.

 
• Natural Bronze

 
• Solid bronze barrel bolt is lockable with a padlock (padlock not included).
 
• Bolt measures 8" long by 5/8" diameter.
 
• Handle measures 4".
 
• Mounting brackets are 1-3/4" by 3/4".
 
• Barrel bolt surface mounts to gate or door.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. This means that it changes over time in a way that most people find desirable. When bronze is exposed to air it will tarnish quickly and turn brown. When bronze is exposed to exterior elements it will turn green. This condition is known as "patina". This is also considered desirable by most people. These conditions are not considered "defects" but are part of the natural beauty of bronze.

 
• Natural Bronze

 
• Gate grille covers up a speakeasy opening on your gate or door.
 
• Grille measures 10-1/4" wide by 12-1/8" tall. Projects 1-1/2" from surface of gate or door.
• Made from steel base material.
 
• Fasteners are included.
 
• PLEASE NOTE: These grilles are handmade and dimensions may vary slightly from those listed

 
• Black wrought iron

 
• Gate grille covers up a speakeasy opening on your gate or door.
 
• Grille measures 10" wide by 10-1/8" tall. Projects 2" from surface of gate or door.
• Made from steel base material.
 
• Fasteners are included.
 
• PLEASE NOTE: These grilles are handmade and dimensions may vary slightly from those listed

 
• Black wrought iron

 
• Gate grille covers up a speakeasy opening on your gate or door.
 
• Grille measures 10-1/2" wide by 10-1/4" tall. Projects 2-1/4" from surface of gate or door.
• Made from steel base material.
 
• Fasteners are included.
 
• PLEASE NOTE: These grilles are handmade and dimensions may vary slightly from those listed

 
• Black wrought iron

 
• Gate grille covers up a speakeasy opening on your gate or door.
 
• Solid bronze gate and door grill for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Grill measures 14-1/4" by 14-1/4" and is made from 1/2" square solid bronze.
 
• Gate grille covers up a speakeasy opening on your gate or door.
 
• Wood screws are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. This means that it changes over time in a way that most people find desirable. When bronze is exposed to air it will tarnish quickly and turn brown. When bronze is exposed to exterior elements it will turn green. This condition is known as "patina". This is also considered desirable by most people. These conditions are not considered "defects" but are part of the natural beauty of bronze.

 
• Solid Natural Bronze

 
• Door and gate pull with grapevine styling. Features a vine like handle with a cluster of grapes at each end and a grape leaf at each end that acts as the mounting plates.
 
• Available in two sizes; medium and large.
 
• The large size measures 19" from tip to tip. The handle diameter is 1". Each grape leaf mounting plate is about 5" tall by 4" wide.
 
• The medium size measures 15.5" from tip to tip. The handle diameter is 3/4". Each grape leaf mounting plate is about 4" tall by 3-1/4" wide.
 
• Made from steel.
 
• Wood screws are included.

 
• Flat Black

 
• Forged Iron base material
 
• Measures 9" from tip to tip
 
• Stands 1-1/2" in relief
 
• Matching wood screws included
 
• This handle is a match and works as a dummy handle for our 9" Double Heart Thumb Latch (SKU 778140).
 
• This high quality product matches our other "Forged Iron" Strap hinges and Dummy Straps

 
• Rough Black Iron Finish

 
• Large door pull with a heart at each end
 
• Measures 11 inches tall
 
• Stands 2-3/8" in relief
 
• Forged Iron base material
 
• Matching wood screws are included
 
• This high quality product matches our other "Forged Iron" Strap Hinges and Dummy Straps
 
• If you need a dummy handle to match our SKU 778013 (11" Rim Gate Latch) this handle is an exact match.

 
• Rough black iron finish

 
• Heavy Iron handle for gates or doors.
 
• Installs with 1-1/2" matching wood screws (included).
 
• Made from solid steel and powder coated to resist corrosion.
 
• Mounting plates measure 1-7/8" by 2-1/2"
 
• Grip is 1-1/8" in diameter at thickest point.

 
• Black Powder Coated

 
• Gate pull is approximately 12" tall by 1-3/8" wide at its widest point.
 
• Made from steel that is 1/4" to 5/16" thick.
 
• Has the look of hammered or pounded wrought iron.
 
• Matching screws are included.

 
• Flat Black

 
• Decorative gate pull with square mounting plates and twisted bar grip.
 
• Pull measures 9" from top to bottom.
 
• Square mounting plates measure 2" by 2".
 
• Handle projection is 3-1/4".
 
• Diameter of twisted bar is 11/16".
 
• Matching wood screws are included.
 
• Made from steel base material.

 
• Rust Finish

 
• Decorative gate or door pull with diamond style mounting plates and twisted bar grip.
 
• Pull measures 9-1/2" from top to bottom including mounting plates.
 
• Mounting plates measure 1-1/2" wide by 2" tall.
 
• Handle projection is 2-3/4".
 
• Diameter of twisted bar is 3/4".
 
• Made from steel base material. Wood screws are included.

 
• Flat Black Powder Coated

 
• Stainless steel gate handle measures 10.5" by 1.25" at widest point and 1/16" thick.
 
• Great for use in marine environments or anywhere the look of stainless steel is desired.
 
• Stainless steel is recommended for redwood, cedar, vinyl and ACQ (treated) lumber.
• Made from solid stainless steel (Type 304)
 
• Stainless steel lag screws are included.

 
• Satin Stainless Steel

 
• Large drop ring pull for gates or doors.
 
• Available in two models; a twisted ring model as shown in photo to left and a smooth ring model (to view click on link below).
 
• Diameter of ring is 5-1/4". It is made out of 5/8" diameter material.
 
• Attachment plate measures 3.5" high by 1.5" wide. Pull projects 1.25" from surface it is mounted to.
 
• Made of steel base material.
 
• Wood screws are included.

 
• Flat Black

 
• Small drop ring pull for gates or doors.
 
• Available in two models; a twisted ring model as shown in photo to left and a smooth ring model (to view click on link below).
 
• Diameter of ring is approximately 3". It is made out of 1/2" diameter material.
 
• Attachment plate measures 3.5" high by 1.5" wide. Pull projects 1.25" from surface it is mounted to.
 
• Made of steel base material.
 
• Wood screws are included.

 
• Flat Black

 
• Decorative ring for gates.
 
• Ring diameter is 3 inches.
 
• Made from steel base material.
 
• Matching wood screws are included.

 
• Black Powder Coated

 
• Decorative ring pull for gates.
 
• Ring diameter is 4 inches.
 
• Made from steel base material.
 
• Matching wood screws are included.

 
• Black Powder Coated

 
• Fits all types of gates and materials.
 
• Fits right and left hand opening gates.
 
• Requires a minimum 5/32" gap between gate and gate post.
 
• Made from tough molded polymers, will not rust or stain.
 
• Fasteners are included.

 
• Flat Black

 
• Gate stop acts to stop gate properly and helps keep gate from slamming shut.
 
• Integrated rubber buffer softens gate slam and reduces noise.
 
• Requires a minimum of 5/16" gap between gate and post.
 
• Molded reinforced polymer construction.
 
• For gates higher than 4 feet use two Gate Stops (located near top and bottom of gate).
 
• Uses 3 each #8 pan head sheet metal screws (not included). Stainless steel screws are offered for purchase during checkout.

 
• Flat Black

 
• Gate stop acts to stop gate properly and helps keep gate from slamming shut. Made for gates made of wood or vinyl.
 
• Integrated rubber buffer softens gate slam and reduces noise.
 
• Requires a minimum of 7/16" gap between gate and post.
 
• Molded reinforced polymer construction.
 
• For gates higher than 4 feet use two Gate Stops (located near top and bottom of gate).
 
• Uses 5 each #12 round head wood screws (not included). Stainless steel screws are offered for purchase during checkout.

 
• Flat Black

 
• Solid bronze gate stop will stop gate in the closed position. The installation of a gate stop prevents damage to your gate latch by stopping the gate before it hits the latch bar. Bronze latch bars will become weakened and eventually break if gates are allowed to slam against them.
 
• Gate stop measures 2" tall by 2" wide with a 1.5" projection.
 
• Mounting screws are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Natural Solid Bronze

 
• Dummy straps install on the face of any door or gate to give the look of a decorative strap hinge. They are normally used in combination with full mortise butt hinges.
 
• Dummy straps made of solid bronze are for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Matching wood screws are included.
 
• These beautiful dummy straps are available in 6 lengths.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid Natural Bronze

 
• Solid bronze dummy strap hinge for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Dummy straps provide a decorative strap look to a gate or door hinged with full mortise butt hinges.
 
• Available in two lengths. Both sizes are made from 1/4" thick material. Both sizes are 2" wide and measure 4" at the widest part.
 
• Wood screws are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid Natural Bronze

 
• This very high quality solid bronze strap hinge is made for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• This product is sold in components. The components consist of 2 items; a strap which attaches to the gate surface and a pintle which attaches to the post. The pintle is available as either a "Plate Pintle" or a "Screw-in Pintle".
 
• Lag screws are included. The Lag Screws are made from stainless steel and coated black. Lag Screws are available in two lengths (1.5" or 2.5"). Please specify which length you prefer in the "Comment" section when you checkout.
 
• Two hinges will support a 150 lb. gate or door. Three hinges will support a 250 lb. gate or door.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Natural Solid Bronze

 
• This very high quality solid bronze strap hinge is made for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• This product is sold in components. The components consist of 2 items; a strap hinge which attaches to the gate surface and a masonary pintle which is cemented into a masonary wall (for example block or stone) or post.
• Lag screws are included with the strap hinge. The Lag Screws are made from stainless steel and coated black. Lag Screws are available in two lengths (1.5" or 2.5"). Please specify which length you prefer in the "Comment" section when you checkout.
 
• The masonary pintle measures approximately 13.5" long by 1-1/8" in diameter. The pintle is 2.25" tall by 11/16" in diameter. The masonary pintle is made of solid brass and may be cut down in length by the end user if necessary.
 
• Two hinges will support a 150 lb. gate or door. Three hinges will support a 250 lb. gate or door.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Straps are Natural Solid Bronze
 
• Masonary Pintle is solid brass

• These solid bronze Architectural Grade hinges are an alternative to surface mounted strap hinges. Architectural Grade butt hinges are thicker and of much higher quality than Residential Grade butt hinges.
• These hinges are installed on gates as "full mortise butt hinges" just as hinges are installed on the typical front door of a house. For a more decorative look, surface mount "dummy strap" hinges on the front of your gate.
 
• The 3” & 3-1/2” hinges come with wood screws.
• The 4” and larger hinges come with wood screws and machine screws.
• They are made of solid bronze base material with a stainless steel pin.
• Optional finials are available for most hinges, check our "Finials & Ball Tips for Door Hinges" section for either Type A or Type B finials.

*NRP HINGES (non-removable pin) have a set screw in the barrel that is accessible only when door is swung open. This security feature deters someone from removing the hinge pin and the door. NRP hinges are normally used for exterior doors that open out.

PAIR or EACH. Please note the UNIT when ordering hinges. We sell the hinges depending on how the manufacturer sells them to us. In this section if a hinge is sold by the PAIR you may order by the half pair. For example if you want 3 hinges order 1.5 pair when you check out. If the hinge is sold by the EACH and you need 3 hinges then order 3 EACH.

• 613 (US10B) oil rubbed bronze

 
• Solid bronze non-working handle for gates and doors. From our "Solid Bronze Collection".
 
• This handle matches our Solid Bronze Thumb Latch and is ideal for use on double doors or gates.
 
• Wood screws are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid Natural Bronze

 
• Solid bronze "dummy" thumb latch handle for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• This dummy handle is non-operative. It is meant for use as a match for our 10" solid bronze "operable" thumb latch (SKU 850048). Normally used as the non-operable handle when you have double gates or double doors.
 
• Wood screws are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid Natural Bronze

 
• Solid bronze thumb latch for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• This thumb latch is made up of two components; a thumb latch (available in 8" or 10" and a drop bar (available with or without a knob). The thumb latch installs on the outside of the gate and the drop bar installs on the inside of the gate.
 
• The drop bar with knob (SKU 850060)measures 7.5" by 3.75".
 
• The drop bar without knob (SKU 850064) measures 6.5" by 4".
 
• For gate thicknesses up to 2-3/4".
 
• If you have a gate thickness more than the above dimensions order our Extension Kit (SKU 850044). Fits gate thickness up to 4". PLEASE NOTE; The Extension Kit (SKU 850044) will ship to you already installed in the thumb latch.
 
• Wood screws are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.
 
• The use of a gate stop with this product is strongly recommended to protect the drop bar. A gate that slams in a strong wind can damage a bronze drop bar. The installation of a gate stop will protect the drop bar. Gate stop is offered for purchase during checkout.

 
• Solid Natural Bronze

 
• Solid bronze thumb latch for "Back-to-Back" gate or door installations. A "Back-to-Back" installation is one in which each thumb latch is installed exactly opposite each other, one on the inside of the gate and one on the outside of the gate.
 
• Our solid bronze hardware is for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• This latch is made up of 3 components; an inside thumb latch, an outside thumb latch and a drop bar (latching mechanism). Each thumb latch measures 8-5/8" tall by approximately 1-7/8" wide at the widest point. The drop bar measures approximately 8" wide by 4" tall at the tallest point.
 
• There are 3 SKU's available depending on your gate thickness. SKU number 850110 fits for gate thicknesses of 1.5" to 2". SKU number 850111 for gate thicknesses of 2" to 2.5". SKU number 850112 for gate thicknesses of 2.5" to 3".
 
• Wood screws are included.
 
• The use of a gate stop with this product is strongly recommended to protect the drop bar. A gate that slams in a strong wind can damage a bronze drop bar. The installation of a gate stop will protect the drop bar. Gate stop is offered for purchase during checkout.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid Natural Bronze

 
• Solid bronze gate stop will stop gate in the closed position. The installation of a gate stop prevents damage to your gate latch by stopping the gate before it hits the latch bar. Bronze latch bars will become weakened and eventually break if gates are allowed to slam against them.
 
• Gate stop measures 2" tall by 2" wide with a 1.5" projection.
 
• Mounting screws are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Natural Solid Bronze

 
• Gate grille covers up a speakeasy opening on your gate or door.
 
• Solid bronze gate and door grill for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Grill measures 14-1/4" by 14-1/4" and is made from 1/2" square solid bronze.
 
• Gate grille covers up a speakeasy opening on your gate or door.
 
• Wood screws are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid Natural Bronze

 
• Solid Bronze ring turn for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Ring turn may be used as a "pull" or may be combined with a spring latch (our SKU 634014) and spindle (our SKU 634004) to create a gate latch.
 
• To create a gate latch purchase 2 ring turns (one for the front and one for the back of the gate or door), one spindle and one spring latch per gate or door.
 
• Ring turn back plate measures 4-1/2" tall and 2-3/4" wide. Diameter of ring is 3-1/2".
 
• Spring latch fits into a 1" diameter hole drilled into the edge of the door. Spring latch backset (distance from the edge of the door to the center of the spindle hole) is 2-3/4".
 
• Spring latch bolt protrudes a maximum of 7/16" (similiar to the spring latch on a typical front door). Spring latch includes a solid brass trim piece for the edge of the door and a solid brass strike plate, both pieces are oil rubbed bronze finish. Also included with spring latch are fasteners, paper installation template and a dust box. Spring latch contains some steel internal parts.
 
• Spindle is 5" long by 5/16" square. Can be used on a maximum 3" thick door. For narrower doors it can easily be cut down with a hacksaw. Spindle is made from steel with a yellow zinc plating.
 
• Mounting screws are included with the ring turn.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid Natural Bronze

 
• Solid Bronze ring turn for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Ring turn may be used as a "pull" or may be combined with a spring latch (our SKU 634014) and spindle (our SKU 634004) to create a gate latch.
 
• To create a gate latch purchase 2 ring turns (one for the front and one for the back of the gate or door), one spindle and one spring latch per gate or door.
 
• Ring turn back plate measures 4-1/2" tall and 2-3/4" wide. Diameter of ring is 4-3/4".
 
• Spring latch fits into a 1" diameter hole drilled into the edge of the door. Spring latch backset (distance from the edge of the door to the center of the spindle hole) is 2-3/4".
 
• Spring latch bolt protrudes a maximum of 7/16" (similiar to the spring latch on a typical front door). Spring latch includes a solid brass trim piece for the edge of the door and a solid brass strike plate, both pieces are oil rubbed bronze finish. Also included with spring latch are fasteners, paper installation template and a dust box. Spring latch contains some steel internal parts.
 
• Spindle is 5" long by 5/16" square. Can be used on a maximum 3" thick door. For narrower doors it can easily be cut down with a hacksaw. Spindle is made from steel with a yellow zinc plating.
 
• Mounting screws are included with the ring turn.
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid Natural Bronze

 
• Solid Bronze lever turn for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Lever turn can be combined with a spring latch (our SKU 634014) and spindle (our SKU 634004) to create a gate latch.
 
• To create a gate latch purchase a Right Hand lever turn and a Left Hand lever turn (one for the front and one for the back of the gate or door), one spindle and one spring latch per gate or door.
 
• Lever turn shown in photo is Left Hand model.
 
• Lever turn back plate measures 9-3/4" tall and 2-3/4" wide. Lever projection is 3-1/4".
 
• Spring latch fits into a 1" diameter hole drilled into the edge of the door. Spring latch backset (distance from the edge of the door to the center of the spindle hole) is 2-3/4".
 
• Spring latch bolt protrudes a maximum of 7/16" (similiar to the spring latch on a typical front door). Spring latch includes a solid brass trim piece for the edge of the door and a solid brass strike plate, both pieces are oil rubbed bronze finish. Also included with spring latch are fasteners, paper installation template and a dust box. Spring latch contains some steel internal parts.
 
• Spindle is 5" long by 5/16" square. Can be used on a maximum 3" thick door. For narrower doors it can easily be cut down with a hacksaw. Spindle is made from steel with a yellow zinc plating.
 
• Mounting screws are included with the lever turn.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Natural Bronze

 
• Solid bronze pull for gates and doors for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Available in two lengths; 12.5" and 17.5".
 
• The 12.5" size has a screw hole center to center dimension of 11.5".
 
• The 17.5" size has a screw hole center to center dimension of 16.5".
 
• Attachment screws are included (Stainless steel flat head 5/16" diameter machine screws). Please specify in the comment section when you check out whether you would like your attachment screws 1-3/4" in length or 2-1/2" in length.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.
 
• PLEASE NOTE: We can special order these pulls so that you can mount one on each side of your door with no mounting hardware or screws visible (known as "back-to-back mounting").  Please call if you wish to order "back-to-back" mounting. We will need to know your door thickness.  There is an additional charge of $30.00 for two pulls set up for "back-to-back mounting".

 
• Solid Natural Bronze

 
• Very high quality Ring Turn Bar Latch for gates and doors.
 
• Latch operates from both sides of the gate.
 
• Made from solid bronze and is made for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Available in a "Right Hand" or "Left Hand" model. Model shown in photo is the "Right Hand" model.
 
• Drop Bar measures 7". Back Plates measure 2-3/4" by 4-1/2". Ring diameter is 3-1/2".
 
• Fits gate thicknesses of 3/4" to 2.5". The spindle that connects the front and back piece is a 5/16" square steel rod.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.
 
• The use of a gate stop with this product is strongly recommended to protect the drop bar. A gate that slams in a strong wind can damage a bronze drop bar. The installation of a gate stop will protect the drop bar. Gate stop is offered for purchase during checkout.

 
• Natural Solid Bronze

 
• Solid bronze barrel bolt is lockable with a padlock (padlock not included).
 
• Bolt measures 8" long by 5/8" diameter.
 
• Handle measures 4".
 
• Mounting brackets are 1-3/4" by 3/4".
 
• Barrel bolt surface mounts to gate or door.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Natural Bronze

 
• Solid bronze cane bolt for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Cane bolt measures 20" tall. Mounting plates measure 2" by 4".
 
• Cane bolt features a large diameter 5/8" bolt.
 
• Wood screws and a keeper for the bottom of the bolt are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid Natural Bronze

 
• Very high quality Lever Bar Latch for gates and doors. Made from solid bronze.
 
• Latch operates from both sides of the gate.
 
• Made from solid bronze and is made for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Available in a "Right Hand" or "Left Hand" model. Model shown in photo is the "Left Hand" model.
 
• Drop Bar measures 7". Back Plates measure 2-3/4" by 4-1/2". Lever is 6" with a 3-1/4" projection.
 
• Fits gate thicknesses of 3/4" to 2.5". The spindle that connects the front and back piece is a 5/16" square steel rod.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.
 
• The use of a gate stop with this product is strongly recommended to protect the drop bar. A gate that slams in a strong wind can damage a bronze drop bar. The installation of a gate stop will protect the drop bar. Gate stop is offered for purchase during checkout.

 
• Natural Solid Bronze

 
• Solid bronze surface bolt for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• Surface bolt measures 8" long by 1-3/4" wide.
 
• Wood screws are included.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Natural Bronze

 
• Solid bronze door studs (also known as "Clavos" are a decorative item used to dress up doors or gates.
 
• They are made from solid bronze and will age like the other bronze items shown on our website.
 
• These door studs are available in two shapes; round and square. And they are available in two sizes; 1" and 2".
 
• Door studs install by gently taping into a pre-drilled hole in the door or gate.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid Natural Bronze

 
• Solid bronze shutter dog for use in coastal areas or anywhere a rustic old world design is desired. From our "Solid Bronze Collection".
 
• For both working and non-working shutters.
   
• These shutter dogs are handed (Right Hand or Left Hand). As you are standing outside the house looking at your pair of shutters, the right hand shutter dog goes on the shutter on your right and the left hand shutter dog goes on the shutter on your left. The shutter dog in the photo is a Right Hand model. If you are ordering two shutter dogs for a window that has a shutter on each side, order one left hand and one right hand.
 
• The Shutter Dog measures 7" tall and 2-1/2" wide. Included is a 4.5" lag bolt. Please note; lag bolt is made from stainless steel.
 
• These shutter dogs are sold by the each. Order one shutter dog per shutter.
 
• Bronze is an old world material that does not deteriorate in coastal or other regions. The Bronze finish, however, is a "living" finish. Please read more about this by clicking on the link.

 
• Solid Natural Bronze