| |
|
 | | |
- - WHAT IS A PAIR OF HINGES?
DOOR HINGES
Baldwin Hinges
Plain Bearing Butt Hinges
Ball Bearing Butt Hinges
Spring Hinges - Double Acting Hinges
Pivot Hinges - Pivot Sets
Screen Door Hinges - Screen Door Locks
Wide Throw Hinges - Swing Clear Hinges
Special Purpose Hinges
Invisible Hinges and Soss Hinges
Door Hardware
CABINET HINGES
Semi Concealed Cabinet Hinges
Surface Mounted Cabinet Hinges
Overlay Hinges - Inset Hinges
Demountable Hinges
Youngdale Hinges
European Hinges - Blum Hinges
Pivot Hinges for Cabinets
Pivot Door Slides - Flipper Door Slides
Entertainment Center Cabinet Hinges
Small Ball Tip Cabinet Hinge
Tray Hinges - Other Cabinet Hardware
FURNITURE HINGES
Table Hinges - Shelf Hinges
Butler Tray Table Hinge
Finial Tipped Hinges
Desk Hinges - Sewing Machine Hinges
Concealed Hinges - Hidden Hinges
Special Purpose Furniture Hinges
Lift-off Hinges - Loose Joint Hinges
Glass Door Hinges
GATE HINGES AND HARDWARE
Gate Latches - Gate Locks
Bolt, Screw, Strap & Pintle Hinges
Gate Strap Hinges
Gate Tee Hinges
Gate Pivot Hinges
Swimming Pool Gate Hinges - Latches
Gate Spring Hinges
Cane Bolts - Gate Wheels - Gate Closers
Gate Grills -Gate Handles -Gate Pulls -Gate Stops
Solid Bronze Gate Hardware
SPECIALTY HINGES
Small Butt Hinges
Piano Hinges - Continuous Hinges
Soss Hinges & Other Invisible Hinges
Strap Hinge - Dummy Strap Hinges
No Mortise Hinges - Bi-Fold Door Hinge
Tee Hinges
Chest Hinges - Box Hinges - Lid Supports
Garage Door Hinges
Folding Screen Hinges
Refrigerator Hinges - Ice Box Hinges
Weld-on Hinges - Welding Hinges
Shower Door Hinges
SHUTTER & WINDOW
Shutter Hinges, Interior
Shutter Hinges, Exterior
Shutter Dogs, Exterior
Shutter Hardware, Exterior
Window Hinges
Window Hardware
Truth Window Hardware
SCREWS
STAINLESS STEEL HINGES & HARDWARE
Butt, Strap & Tee Hinges, Stainless
Gate Hardware & Hinges, Stainless
Cabinet & Furniture Hardware & Hinges, Stainless
Window & Shutter Hardware & Hinges, Stainless
Industrial Hinges, Stainless
Screws, Stainless Steel
| | |
Recent Customer Feedback:
I have to say that I am not only
impressed by the stock that you
offer but that I am thrilled by the
fact that you have delivered what
I ordered when I asked that it be
delivered. With all of the "big box"
home improvement centers
replacing the older hardware
stores it has become increasingly
tougher to find repair parts. After
surfing your site a bit it is obvious
that you folks are a place that I will
recommend to my buddies for their
cabinet repair and construction
needs. Thanks so much for taking
such excellent care of me. - Joe
How fast and helpful you have
been in helping me, not only to
get info on your product but also
the web site to help me build the
door/bookshelf I wanted to
achieve. Thank you for your quick
and accurate help. -Jill O'Brien
Thank you for the prompt response.
If I can't find 'em, I'll be back for
the bigger hinges and just recut the
doors. Thanks again. Your customer
service makes you stand out from
your competitors. -Dennis Fitch
|
|
|
SPECIALTY HINGES
 Solid Brass Hinges
|
Description:
|
|
|
7 styles of hinges in 5 finishes |
Solid Brass Hinges with Ball tips
|
Description:
|
|
|
3 styles of hinges in 5 finishes |
Loose Joint Hinges
|
Description:
|
|
|
8 styles of hinges in 4 finishes |
Stainless Steel Hinges
|
Description:
|
|
|
|
Finial Tipped Hinges
|
Description:
|
|
|
13 styles of hinges in 15 finishes |
Brass Utility Hinges
|
Description:
|
|
|
4 styles of hinges in 2 finishes |
Steel Utility Hinges
|
Description:
|
|
|
7 styles of hinges in 4 finishes |
Plated Steel Hinges
|
Description:
|
|
|
1 style of hinge in 4 finishes |
Plastic Hinges
|
Description:
|
|
|
|
Small Spring Hinges
|
Description:
|
|
|
Small hinges with springs. |
|
Piano Hinge, Stainless Steel
|
Description:
|
|
|
Stainless steel piano hinge with screw holes and without screw holes. Also known as continuous hinges. |
Piano Hinges, Plain Steel
|
Description:
|
|
|
Plain steel piano hinge with screw holes, without screw holes and heavy duty with a 3/8" pin. Also known as continuous hinge. |
Piano Hinge, Aluminum
|
Description:
|
|
|
Aluminum piano hinge with screw holes and without screw holes. Also known as continuous hinge. |
Piano Hinge, Solid Brass
|
Description:
|
|
|
Solid Brass piano hinge with screw holes and small brass piano hinge. Also known as continous hinge. |
Piano Hinge, Brass Plated Steel
|
Description:
|
|
|
Brass plated steel piano hinge with screw holes. Also known as continous hinge. |
Piano Hinge, Nickel Plated Steel
|
Description:
|
|
|
Nickel plated steel piano hinge with screw holes. Also known as continous hinge. |
Piano Hinge, Wrap Around
|
Description:
|
|
|
Double wrap-around and single wrap-around piano hinges. Also known as continous hinge. |
|
Soss Extra Light Duty Concealed Hinges
|
Description:
|
Finishes: |
|
- For 11/16" minimum door thickness
- hinge is completely concealed when door is closed
- opens 180 degrees
- hinge shown in photo is SKU 900016
- steel base material
- screws included
|
- Satin Brass
- Satin Chrome
- Black Epoxy
|
Soss Light Duty Concealed Hinges
|
Description:
|
Finishes: |
|
- For 1/2" and 3/4" minimum door thickness
- hinge is completely concealed when door is closed
- opens 180 degrees
- hinge shown in photo is SKU 900020
- made from high strength plated steel and heavy duty zinc alloy castings
- matching screws are included
|
- Satin Brass
- Satin Chrome
- Black Epoxy
|
Soss Solid Stainless Steel Hinges, Light Duty
|
Description:
|
Finishes: |
|
- Solid stainless steel hinges made by Soss. Suitable for marine environments, yachts, etc.
- For doors with a minimum door thickness of 1/2" or 3/4".
- Hinge is completely concealed when door is closed.
- Hinge opens a maximum of 180 degrees.
- Made from solid stainless steel.
- Matching stainless steel screws are included.
- Hinge shown in photo shows the polished stainless finish.
- PLEASE NOTE; Soss stainless steel hinges are sold by the each. You would normally need to order 2 or 3 hinges per door.
|
- Satin Stainless Steel
- Polished Stainless Steel
|
Soss Solid Stainless Steel Hinges, Medium Duty
|
Description:
|
Finishes: |
|
- Solid stainless steel hinges made by Soss. Suitable for marine environments, yachts, etc.
- For doors with a minimum door thickness of 1-3/8".
- Hinge is completely concealed when door is closed.
- Hinge opens a maximum of 180 degrees.
- Made from solid stainless steel.
- Matching stainless steel screws are included.
- Hinge shown in photo shows the satin stainless finish.
- The Soss #416SS hinges were previously numbered Soss #216SS.
- PLEASE NOTE; Soss stainless steel hinges are sold by the each. You would normally need to order 2 or 3 hinges per door.
|
- Satin Stainless Steel
- Polished Stainless Steel
|
Soss Medium Duty Concealed Hinges,
|
Description:
|
Finishes: |
|
- For 1", 1-1/8" and 1-3/8" minimum door thickness.
- Hinge is completely concealed when door is closed.
- Hinge opens a maximum of 180 degrees.
- Made from high strength plated steel and heavy duty zinc alloy castings.
- Hinge shown in photo is SKU 900024.
- Matching screws are included.
- PLEASE NOTE: THESE HINGES ARE NOW SOLD BY THE EACH (FORMERLY SOLD BY THE PAIR). FOR A TYPICAL DOOR YOU WOULD NORMALLY ORDER 2 OR 3 EACH.
|
- Satin Brass
- Satin Chrome
- Black Epoxy
|
Soss Heavy Duty Concealed Hinges,
|
Description:
|
Finishes: |
|
- For 1-3/4" and 2" minimum door thickness.
- Hinge is completely concealed when door is closed.
- Hinge opens a maximum of 180 degrees.
- Made form high strength plated steel and heavy duty zinc alloy castings.
- For full size doors.
- Reinforced nylon at wear points for long life.
- Matching screws are included.
- Hinge shown in photo is SKU 900028.
- PLEASE NOTE: THESE HINGES ARE NOW SOLD BY THE EACH (FORMERLY SOLD BY THE PAIR). FOR A TYPICAL DOOR YOU WOULD NORMALLY ORDER 2 OR 3 EACH.
|
- Satin Brass
- Satin Chrome
- Black Epoxy
|
Soss Invisible Closer Hinge
|
Description:
|
Finishes: |
|
- The Soss invisible spring closer gives you a spring closer that is totally invisible from either side of the door when the door is closed. This closer is meant to be used with regular Soss hinges of the same size (Use them in combination with regular Soss #216, #218 or #220 hinges).
- Closure rate is adjustable
- The spring can be installed either inside the door or inside the door jamb.
- Allow one spring closer for every 75lbs of door weight
- These Soss invisible closer hinges match the Soss regular invisible hinges (Soss #216, 218 and 220)
- Made of high strength plated steel and heavy duty zinc alloy castings.
- Click on link below for dimension chart and sizing chart for door thicknesses.
|
- Satin Brass
- Satin Chrome
- Black Epoxy
|
Router Guides for Soss Hinges
|
Description:
|
|
|
- A Soss router guide template makes the job easier and faster and will give you a perfect installation every time.
- A Soss router guide template allows you to cut both the shallow and the deep mortise required for installation.
- There is a Soss router guide template for each size Soss hinge.
- The template is held on the door and jamb with nails and removable guide pins locate the deep mortise.
- Made from hardwood
- You must have a Porter-Cable router guide bushing (Porter-Cable #42024) and locknut (Porter-Cable #42237) to use the Soss Router Guides. Order our SKU #900110 for the guide bushing and locknut. Router bit not included.
|
Router Guide Bushing and Locknut for Soss Router Guide
|
Description:
|
|
|
- This guide bushing and locknut is necessary to use any of our Soss Router Guides
- It is the same as a Porter Cable #42024 bushing and a Porter Cable #42237 locknut.
- Fits most routers
- Guide bushing I.D. measures 21/32"; O.D. measures 3/4"; distance past base is 9/16".
|
Soss Mulitple Router Guide System
|
Description:
|
|
|
- The Soss Multiple Router Guide System allows you to set up a rounter guide for an entire door.
- It is especially efficient if you have a number of doors to mortise that will be using the same size hinge
- Includes router guides, aluminum channel rails, connecting angle rail, guide pins, locator pins and fasteners and a 4-page instruction booklet
- You must have a Porter-Cable router guide bushing (Porter-Cable #42024) and locknut (Porter-Cable #42237) to use the Soss Router Guides. Order our SKU #900110 for the guide bushing and locknut. Router bit not included.
- Router template guides are made from hardwood
- The Soss Multiple Router Guide System is available in 3 hinge sizes (Soss 216, 218, and 220) and it is available in either the 3 hinge model or the 4 hinge model. The 3 hinge model is shown in photo to left.
|
Stainless Steel Concealed Hinge
|
Description:
|
Finishes: |
|
- Hinge is completely concealed when door is closed
- Maximum door opening is 180 degrees
- Click on specification link below for detailed dimensions
- Hinge is sold by the each. Usually two each are needed per door.
- Made entirely of type 304 stainless steel
- Flat head stainless wood screws are included
- Maximum door size is 17-23/32" wide by 27-9/16" tall with a 7/8" door thickness. Maximum door weight for a pair of hinges is 5.72 lbs.
|
|
Light Duty Nylon Concealed Hinge
|
Description:
|
Finishes: |
|
- Light duty nylon hinge with steel linkages
- Affordable price
- Measures 1-1/4" by 1-1/4" by 15/32" thick (with hinge in closed position)
- Incorporated set screws expand wedge locks to secure in wood. No wood screws are necessary.
- For wood up to 13/16" thick
- Make mortise with a 12mm drill bit
- Sold by the each. Order 2 hinges per door.
|
|
Medium White Poly Concealed Hinge
|
Description:
|
Finishes: |
|
- Large (approx 3.25" tall) concealed hinge.
- Body is made of white polyamide, hinge face and linkage is made from Type 304 stainless steel.
- Excellent hinge for marine applications.
- Load capacity is 66lbs per pair of hinges and 110lbs for 3 hinges.
- Maximum door opening of 180 degrees.
- Uses 4 each #10 flat head screws per hinge (Not included but offered for purchase during checkout).
|
- White Polyamide with Stainless Face
|
Large Brown Poly Concealed Hinge
|
Description:
|
Finishes: |
|
- Large (approx 3.5" tall) concealed hinge.
- Body is made of brown polyamide, hinge face and linkage is made from Type 304 stainless steel.
- Excellent hinge for marine applications.
- Load capacity is 88lbs per pair of hinges and 132lbs for 3 hinges.
- Maximum door opening of 180 degrees.
- Uses 4 each #12 flat head screws per hinge (Not included but offered for purchase during checkout).
|
- Brown Polyamide with Stainless Face
|
Concealed Hinge, Barrel Type
|
Description:
|
|
|
- for right or left hand installations
- completely invisible from either side of the door when closed
- easy installation
- for light applications
- adjustable tensioning screw
- accurate drilling essential
- solid brass base material with brass links
- no screws needed
- PLEASE NOTE: these hinges are not recommended for vertical or load bearing applications. The manufacturer does not provide weight ratings on this product.
|
No-Bore Concealed Hinge for Back-to-Back Doors
|
Description:
|
Finishes: |
|
- Self-closing, concealed hinge.
- Made for cabinets whose doors open back-to-back. Both doors will open without interfering with each other.
- Made for use on frameless cabinets
- Opening angle is 90 degrees.
- Approximate size of hinge is 1-3/4" x 4-1/8".
- No hole boring or mounting plates required.
- For full-overlay, half-overlay, or inset doors.
- When open, the door is offset 1/2".
- Maximum full overlay is 25/32".
- When used on inset doors the maximum door thickness is 3/4".
- Steel base material.
- Uses 6 each #6 pan head screws per hinge(not included but offered for purchase during checkout).
|
|
No-Bore Concealed Hinge
|
Description:
|
Finishes: |
|
- Opens to 90 degrees.
- Made for use with frameless cabinets.
- Approximate size of hinge is 1-7/8" x 4-1/2".
- For full-overlay, half-overlay, or inset doors.
- When open, inside of door is flush cabinet style.
- No hole boring or mounting plates required.
- Maximum full overlay is 25/32”.
- For door thicknesses 5/8" to 3/4" and side panel thicknesses of 5/8" to 7/8"
- Available in free swinging or self closing models.
- Steel base material
- Uses 8 each #6 pan head screws (not included. Screws are offered for purchase during checkout)
- For hinges with bronze finish, order 8 each #286-252 per hinge (#6 x 5/8” pan head bronze screws).
|
- Bronze plated
- Nickel plated
|
175 Degree Concealed Hinge
|
Description:
|
Finishes: |
|
- This heavy duty hinge allows smooth, silent, sag-free opening to 175 degrees
- Hinge surface mounts to the inside of your frameless cabinet. Small screw holes are the only holes you need to drill.
- Hinge works on 5 different applications: full overlay doors, half-overlay doors, full inset doors, and mitered corner doors (click on link below for illustrations) It also works on 3/8" inset doors with a 3/8" lip (no illustration available)
- For normal use the hinge can be used on door thicknesses up to 1"
- If used on "back-to-back" cabinets a maximum of 13/16" is recommended
- Hardened steel construction (.082 gauge steel)
- Features spring closing mechanism so cabinet latches are not necessary
- Cabinet must have at least a 4-1/8" depth. Hinge measures approximately 4" long by 1-5/8" by 2".
- Screws are not included but are offered for purchase during checkout. Each hinge uses 10 each #6 pan head screws.
|
|
30mm All Metal Flap Hinge
|
Description:
|
Finishes: |
|
- Flap opens 90 degrees flush with inside shelf
- Fits flush in door & shelf surfaces, concealed from exterior
- Click on link below for more install information
- Uses #4 Flat head screws (not included)
- Hinge is 3-way adjustable and detachable
|
- Dark Bronze plated
- Nickel plated
|
Drop Flap Hinge, Metal
|
Description:
|
Finishes: |
|
- Allows panel to fold down and hold at 90 degrees
- Fits a 35mm (1-3/8") hole
- Hinge is detachable and adjustable
- Zinc die cast material
- Hinge thickness is 15/32"
- Screws are not included
|
|
Drop Flap Hinge, Nylon
|
Description:
|
Finishes: |
|
- flap opens 90 degrees, flush with inside shelf
- fits flush in door & shelf surfaces, concealed from exterior
- 30mm Forstner or flat boring bit needed to install
- for 3/4” thick doors
- linkage is brass and steel
- #4 x 5/8” oval head wood screws are included
|
|
Drop Flap Hinge, All metal
|
Description:
|
Finishes: |
|
- Allows drop panel to fold down and hold at 90 degrees
- Fits a 35mm (1-3/8") hole
- Hinge thickness is 1/2"
- Hinge is detachable and adjustable
- Zinc die cast material
- Screws are not included
|
- Dark bronze
- Satin Brass
- Nickel
|
30mm Plastic & Metal Flap Hinge
|
Description:
|
Finishes: |
|
- Flap opens 90 degree flush with inside shelf
- Fits flush in door & shelf surfaces, concealed from exterior
- Click on link below for more install information
- Uses #3 Flat head screws (not included)
- Hinge is 3-way adjustable and detachable
|
- White plastic and Chrome plated
|
|
Dummy Strap Hinges
|
Description:
|
|
|
Dummy strap hinges are non-functional straps that give your gate or door a decorative look. There are over 50 different dummy straps in this section for you to choose from, all in stock and ready to ship the next working day. |
Ornamental Strap Hinges
|
Description:
|
|
|
Ornamental strap hinges in all styles and sizes, from heavy duty to light duty. In this section there are over 50 different ornamental strap hinges for your door or gate, all in stock and ready to ship the next working day. |
Stainless Steel Strap Hinges
|
Description:
|
|
|
Stainless steel strap hinges are great for corrosive areas like marine environments. Stainless steel is also great if you like the look of stainless steel. All of our hinges are in stock in our own warehouse and will ship out to you the next working day. |
Light Duty Strap Hinges
|
Description:
|
|
|
Light duty strap hinges are great for boxes and crates or any light duty use. All of our hinges are in stock in our own warehouse. |
Heavy Duty Strap Hinges
|
Description:
|
|
|
Heavy duty strap hinges for large gates and doors. Some of these hinges can hold a gate that weighs several thousand pounds. There are over 50 heavy duty strap hinges in this section, all in stock and ready to ship out the next working day. |
Pintle, Screw Hook & Strap
|
Description:
|
|
|
Pintle type strap hinges allow you to install a gate or door that can be lifted off after installion if you wish. Various styles are available from decorative to basic. Like all of our hinges they are in stock in our own warehouse and ready to ship. |
Solid Brass Strap Hinges
|
Description:
|
|
|
Solid brass strap hinges are great if you need a strap hinge that will not rust. Brass also has a rustic look that many people prize. These hinges are in stock and ready to ship. |
|
No-Mortise Hinge, Satin Brass
|
Description:
|
Finishes: |
|
- The advantage of a "no-mortise" hinge is that because the one leaf is set inside the other installation of the hinge leaves only a small gap between the door and frame .
- For connecting doors, panels, or screens.
- No-mortise hinges are a good choice for bi-fold doors.
- This hinge will leave only a 1/16" gap between the door and frame or in the case of bi-fold doors between the two doors.
- Made from steel base material.
- Uses #5 x 3/4” flat head screws which are included.
|
|
No Mortise Hinge
|
Description:
|
Finishes: |
|
- No-mortise (also known as a non-mortise hinge) hinge, great for use on interior shutters, bi-fold doors, cabinets or screens.
- Installs like a full mortise butt hinge however no mortising (cutting of door edge or frame edge) is required. Leaves only a 1/16" gap between door and frame.
- Hinge measures 3" tall by 1-1/4" wide.
- Fits door thicknesses from 7/8" to 1-1/4".
- Made from steel base material and available in 6 different finishes.
- Hinge pin is removable.
- Uses #6 flat head screws. Screws are not included but are offered for purchase during checkout.
|
- Brass Plated
- White
- Antique Brass
- Brushed Chrome
- Bright Nickel
- Polished Chrome
|
Stainless Steel Lift off No Mortise Hinges
|
Description:
|
Finishes: |
|
- No mortise style hinge. Hinge installs as a normal full mortise butt hinge but no mortising is required.
- Leaves only a 1/8" gap after installation.
- Top leaf rides on a ball bearing located on the top of the hinge pin.
- Hinge is not handed, may be used on left or right opening doors.
- Hinge shown in photo is shown in the "door open" position.
- Hinge is a lift off hinge, door may be lifted off after hinge is installed without removing any screws.
- Made from solid type 304 stainless steel.
- Available in two sizes, a 4" high hinge and a 5" high hinge.
- The 4" hinge leaf is 1-5/8" wide not including the hinge barrel. The hinge barrel diameter is 5/8".
- The 5" hinge leaf is 1-3/8" wide not including the hinge barrel. The hinge barrel diameter is 3/4".
- Weight ratings listed below are for a pair of hinges.
- Stainless steel flat head screws are included.
|
|
No-Mortise Hinge, Flag Style
|
Description:
|
Finishes: |
|
- No Mortise hinge for bi-fold doors, interior shutters or other doors where a no mortise hinge is desired.
- Available in two sizes; 3" tall or 2" tall.
- Leaves only a 1/16" gap between the door and frame or between doors.
- Steel base material.
- Wood screws are included.
- PLEASE NOTE; the screw hole pattern shown in the photo does not represent the actual screw hole pattern of the hinge.
- Sold by the pair. A pair means two hinges. The photo to the left is one hinge or 1/2 pair.
|
|
No-Mortise Hinges With Finial Tip
|
Description:
|
Finishes: |
|
- Hinge requires no mortising to install.
- Leaves only a 1/16” gap.
- Tight pins with decorative finial tip.
- Steel base material.
- Joint length means distance along hinge pin. Does not include finials.
- SKU 816561 includes screws.
- Use flat head screws (not included but offered for purchase during checkout).
- For the #4 screw order SKU 286253.
- For the #5 screw order SKU 286254.
|
- Light Antique Brass
- Bronze plated
|
No-Mortise Hinge with Finial Tips, Bronze
|
Description:
|
Finishes: |
|
- Steel base material.
- 2" tall (not including tips).
- 7/8" wide.
- Fits door thicknesses of 5/8" to 3/4".
- Screws are included.
- requires no mortising to install and leaves only a 1/16" gap.
|
|
No-Mortise Hinge, Brass Plated
|
Description:
|
Finishes: |
|
- Steel base material.
- 3-1/2" tall by 1-1/4" wide (in closed position).
- Fast pin.
- Nylon spacers.
- Screws are included.
- Fits door thickness of 1" to 1-1/4".
|
|
Antique Brass No-Mortise Hinge
|
Description:
|
Finishes: |
|
- Beautiful no-mortise style hinge is made from solid brass base material.
- Hinge is 2-1/2" tall by 15/16" wide.
- Made to fit a 3/4" thick door.
- Decorative ball tips.
- Screws are included.
|
|
No-Mortise Hinges
|
Description:
|
Finishes: |
|
- Beautiful No-Mortise style hinge.
- Hinge is 2-1/2" tall (not including tips).
- Tip-to-tip measurement is 3-1/8".
- Width of hinge is 1".
- Matching wood screws are included.
- Requires no mortising to install and leaves only a 1/16" gap.
- Made to fit a door thickness of 3/4".
- When ordering, please notice the material of the hinge.
|
- Satin Nickel
- Oil Rubbed Bronze
- Polished Brass
|
No Mortise Hinge
|
Description:
|
Finishes: |
|
- Made to fit a 3/4" to 7/8" door.
- Requires no mortising to install and leaves only a 1/16" gap.
- 3-1/8" tip-to-tip measurement.
- 2-1/2" tall not including tips.
- 1" wide.
- Made from steel or brass base material. Please note material listed with SKU number before ordering.
- Matching wood screws are included.
|
- Antique Brass
- Polished Nickel
- Weathered Copper
- Antique Nickel
|
Steeple Tipped No-Mortise Hinges
|
Description:
|
Finishes: |
|
- Beautiful solid brass hinges require no mortising to install.
- Tight pins with a decorative finial tip (steeple tip).
- Installs with only a 1/16" gap between door and door frame.
- Uses #5 x 5/8 inch flat head screws. (Screws are included).
- Made from solid brass base material.
- Hinge is made for 3/4" thick door.
- Tip-to-tip measurement is 2-7/8".
- The large leaf measures 3/4" by 2" (not including the barrel).
- The barrel measures 1/4".
- Available in 13 different finishes. Click on link to view finish chart.
- PLEASE NOTE: the manufacturer of the "Satin Nickel, Matt" hinge calls it "Silver Satin". We believe that the term "Satin Nickel, Matt" is more in line with industry wide descriptions. The finish is a Satin Nickel finish that is slightly duller than a typical Satin Nickel finish.
|
- Satin Brass
- Gloss Oil Rubbed Bronze
- Black Nickel
- Flat Black
- Oil Rubbed Bronze
- Antique Copper
- Antique Nickel
- Polished Brass
- Polished Chrome
- Satin Nickel, Matt
- Polished Nickel
- Iron/Pewter
- Venetian Bronze
|
Ball Tipped No-Mortise Hinges
|
Description:
|
Finishes: |
|
- Beautiful solid brass hinges require no mortising to install.
- Tight pin with a decorative ball tip.
- Installs with only a 1/16" gap between door and door frame.
- Uses #5 x 5/8 inch flat head screws. (Screws are included).
- Made from solid brass base material.
- Hinge is made for 3/4" to 7/8" thick door.
- Tip-to-tip measurement is 2-5/8".
- The large leaf measures 11/16" by 2" (not including the barrel).
- The barrel measures 1/4".
- Available in 10 different finishes. Click on link to view finish chart.
- PLEASE NOTE: the manufacturer of the "Satin Nickel, Matt" hinge calls it "Silver Satin". We believe that the term "Satin Nickel, Matt" is more in line with industry wide descriptions. The finish is a Satin Nickel finish that is slightly duller than a typical Satin Nickel finish.
|
- Satin Nickel, Matt (similiar to Stainless Steel finish)
- Oil Rubbed Bronze
- Polished Nickel
- Old Copper
- Flat Black
- Polished Brass
- Iron/Pewter
- Venetian Bronze
- Gloss Oil Rubbed Bronze
- Polished Chrome
|
No-Mortise Hinges-
|
Description:
|
Finishes: |
|
|
|
Shutter Hinge, Interior, No-Mortise, 3 Inch
|
Description:
|
Finishes: |
|
- No-mortise shutter hinge for interior shutters.
- Hinge is 3" tall and is made for shutters that are from 1" to 1-1/8" thick.
- Wrap around part of hinge leaf measures 7/8".
- Hinge pin is removeable so that hinge will work as a left hand or right hand hinge.
- Uses #6 flat head screws, not included but offered for purchase during checkout.
- Made from steel base material.
|
|
No Mortise Lid Hinge
|
Description:
|
Finishes: |
|
- For lift lids on stereos, toy chests, piano benches, etc.
- Steel base material
- Hinge measures 2" tall along hinge pin. Lid leaf measures 1-5/8" by 1"
- Opens approximately 195 degrees
- In the "Size" column below the size refers to the thickness of the back wall of the box.
- For the bronze model order our SKU #286253 (#4 x 5/8") bronze screws. Screws are not included but are offered for purchase during checkout.
- For the brass model use #4 flat head brass screws. Screws are not included but are offered for purchase during checkout.
|
|
Locking Bi-Fold Door Hinge
|
Description:
|
Finishes: |
|
- This hinge locks in open and closed position (and also at 30 degrees and 90 degrees)
- It is good for bi-fold doors because it automatically locks flat in the open position
- The door will remain straight and can engage magnetic catches
- Size of hinge is 2-3/8" tall and 2-9/16" wide
- Uses #6 flat head screws (not included)
- Click on links below for more information on hinge
- Die cast metal base material
- For doors with a minimum stile width of 1-1/8"
|
|
Johnson Hardware Bi-Fold Door Hinge
|
Description:
|
Finishes: |
|
- Hinge replaces bi-fold door hinges made by Johnson Hardware.
- Hinge measures 2-1/8" tall by 1-1/2" wide. Vertical screwhole spacing is 1-1/2" center to center. Legs on back of hinge project 1/2".
- Made from steel base material.
- Sheet metal screws are included.
|
|
|
Heavy Duty Tee Hinge
Light Duty Tee Hinge
Ornamental Tee Hinge
Brass Tee Hinge
4" Gate Spring Tee Hinge Set
|
Finishes: |
|
|
3-1/2 Gate Tee Hinge
|
Description:
|
Finishes: |
|
- Hinge measures 5" wide in the open position.
- Narrow leaf measures 4.5" tall by 2" wide.
- Wide leaf measures 3-1/4" tall by 3" wide.
- Joint length is 4-3/4".
- Weight rating is 50lbs per hinge.
- Uses #10 wood screws. Not included but offered for purchase during checkout.
- SKU 215422 is a heavy galvanized finish, excellent for use on a sea coast or with redwood or treated lumber. The galvanized model has a solid brass hinge pin for extra corrosion resistance.
- Steel base material.
|
- Black coated
- Galvanized
- Zinc Chromate
|
3-1/2 Tee Hinge (Contractors 10 Pack)
|
Description:
|
Finishes: |
|
- Hinge measures 5" wide in the open position.
- Narrow leaf measures 4.5" tall by 2" wide.
- Wide leaf measures 3-1/4" tall by 3" wide.
- Joint length is 4-3/4".
- Weight rating is 50lbs per hinge.
- Uses #10 wood screws. Not included but offered for purchase during checkout.
- Steel base material.
- PLEASE NOTE: This hinge is sold in a package of 10 hinges at a discounted price over buying them individually. It is the same hinge as our SKU 215421.
|
|
|
Toy Box Lid Supports
|
Description:
|
|
|
Weight-rated lid supports for toy boxes and chests. Use the formula to help you choose the proper lid support for your toy box or chest. Also in this section are cedar chest hinges, box hinges, swing-up hinges, bench seat hinges, and various lid supports. |
Chest & Box Lid Hinges
|
Description:
|
|
|
This section has hinges for chest lids and box lids, bench seats and cedar chests tops. |
Take-apart Hinges
|
Description:
|
|
|
Take-apart hinges allow a lid or small door to be lifted off or removed after the lid has been installed. |
Ornamental Small Box Hinges
|
Description:
|
|
|
Small ornamental hinges for boxes and chests and other uses. Lots of styles to choose from. |
Spring Hinge
|
Description:
|
|
|
Small spring hinges for small boxes or anywhere a very light weight spring hinge is needed. |
|
Heavy Duty Garage Door Roller Ball Bearing
|
Description:
|
Finishes: |
|
- For most overhead sectional wood and steel garage doors
- Designed to use on a 2" track
- Shaft diameter is 7/16"
- Heavy duty 10 ball bearing steel rollers for extended life
- Shaft length is 3-1/4"
- Works with our #1, #2 and #3 garage door hinges
- Wheel diameter is 1-13/16"
- Sold by the pack. A pack contains 2 rollers.
- PLEASE NOTE: BEFORE YOU PURCHASE THIS PRODUCT, READ THE WARNING AT THE SPECIFICATION LINK BELOW.
|
|
#1 Garage Door Hinge
|
Description:
|
Finishes: |
|
- For most overhead garage doors equiped with extension springs
- This hinge replaces hinges stamped with the #1 on the surface
- The #1 hinge is is located between the first and second door panel sections
- Hinge barrel accepts 7/16" roller shaft
- Made from 14 gauge steel
- Carriage bolts and nuts are included for attaching to wood doors. For metal doors use sheet metal screws (not included).
- Hinge measures 7-1/2" by 2-3/4" and projects out from surface 1-1/8"
- PLEASE NOTE: BEFORE YOU PURCHASE THIS PRODUCT, READ THE WARNING AT THE SPECIFICATION LINK BELOW.
|
|
#2 Garage Door Hinge
|
Description:
|
Finishes: |
|
- For most overhead garage doors equiped with extension springs
- This hinge replaces hinges stamped with the #2 on the surface
- The #2 hinge is is located between the second and third door panel sections
- Hinge barrel accepts 7/16" roller shaft
- Made from 14 gauge steel
- Carriage bolts and nuts are included for attaching to wood doors. For metal doors use sheet metal screws (not included).
- Hinge measures 7-1/2" by 2-3/4" and projects out from surface 1-1/2"
- PLEASE NOTE: BEFORE YOU PURCHASE THIS PRODUCT, READ THE WARNING AT THE SPECIFICATION LINK BELOW.
|
|
#3 Garage Door Hinge
|
Description:
|
Finishes: |
|
- For most overhead garage doors equiped with extension springs
- This hinge replaces hinges stamped with the #3 on the surface
- The #3 hinge is is located between the third and fourth door panel sections
- Hinge barrel accepts 7/16" roller shaft
- Made from 14 gauge steel
- Carriage bolts and nuts are included for attaching to wood doors. For metal doors use sheet metal screws (not included).
- Hinge measures 7-1/2" by 2-3/4" and projects out from surface 1-3/4"
- PLEASE NOTE: BEFORE YOU PURCHASE THIS PRODUCT, READ THE WARNING AT THE SPECIFICATION LINK BELOW.
|
|
|
Folding Screen Hinges-
|
Description:
|
Finishes: |
|
- Double acting
- For folding screens that fold in and out
- Steel base material
- Screws are included for hinges with Statuary Bronze finish. Screws are not included for hinges with Brass finish
- For brass finish hinges screws are offered for purchase during checkout. Order 4 screws per hinge.
|
- Brass plated
- Statuary bronze plated
|
Folding Screen Hinges - Stainless Steel
|
Description:
|
Finishes: |
|
- Double acting.
- For folding screens that fold in and out.
- Hinge allows folding screen doors to swing 180 degrees both left and right.
- Uses flat head screws (not included but offered for purchase during checkout).
- Stainless steel base material (type 304 stainless).
- Each hinge uses up to 10 screws per hinge.
|
|
|
9" Cast Aluminum Strap Hinge
|
Description:
|
Finishes: |
|
- Strap side of hinge measures 2-1/2" wide by 9" long by 5/8" thick cast aluminum
- Plate side of hinge measures 4-5/8" high by 2-3/4" wide by 3/8" thick
- Hinge swings on bronze bearings
- Each hinges uses 8 each #14 flat head screws (not included)
- For doors where the frame and door are flush with each other
- The hinges are rated at 200 lbs for a pair of hinges on a door up to 36" wide
|
- Polished aluminum
- Flat Black
|
12 Inch, 18 Inch and 24 Inch Strap Hinge
|
Description:
|
Finishes: |
|
- Strap side of hinge measures 3" wide and 5/32" thick and is made of plated steel
- Plate side of hinge measures 6-1/8" by 2-1/2" by 1/2" thick and is made of cast aluminum
- Hinge swings on bronze bearings
- For doors where the frame and the door are flush
- Plate side of hinge uses #14 flat head screws (not included)
- Strap side of hinge uses 3/8" bolts (not included)
- The 12", 18" and 24" dimensions are measured from the end of the strap to the pivot point of the strap
Weight Ratings are for two hinges per door
SKU 902002 and 902010 are rated at 250lbs for up to a 36" door and 200lbs for a 36" to 40" door
SKU 902004 and 902012 are rated at 300lbs for a 36" to 40" door and 250lbs for a 42" to 46" door
SKU 902006 and 902014 are rated at 300lbs for up to a 48" door
|
- Chrome plated, highly polished
- Black Coated
|
Die Cast Refrigerator Hinge
|
Description:
|
Finishes: |
|
- Surface mounted hinge.
- Stainless steel pin.
- Made from high pressure zinc die cast base material.
- Highly polished chrome plated.
- Screws are not included but are offered for purchase during checkout.
- SKU # 818002 uses 6 each #8 flat head screws and 8 each #10 flat head screws per pair of hinges.
- SKU # 818004 and SKU # 818006 use 14 each #8 flat head screws per pair of hinges.
|
|
Die Cast Refrigerator Hinge, Narrow Flange
|
Description:
|
Finishes: |
|
- Surface mounted refrigerator hinge, available in two offset models and a flush model. Classic styled refrigerator hinge for smaller service doors.
- The offset measurement is the distance between the surface of the door and the surface that the door is mounted to.
- Made from high pressure die cast zinc chromate with a stainless steel pin.
- Hinge measures approximately 4-1/4" wide by 3-1/16" tall. Click on link below for dimensional diagram.
- Sold by the pair. A pair is two complete hinges.
- Screws are not included but are offered for purchase during checkout. Uses #8 flat head screws. Order 12 screws per pair of hinges.
|
|
Die Cast Refrigerator Latch
|
Description:
|
Finishes: |
|
- Refrigerator Latch matches our die cast refrigerator hinges.
- Handle is high pressure zinc die cast base material, latching mechanism is steel.
- Highly polished chrome plated.
- Surface mounts for offset door.
- Strike accepts variable offsets (from 3/4" to 1-1/4").
- Handle is 6" long. Handle mounting plate measures 2-1/8" wide by 2-5/16" long. Handle projects 2-1/8". Handle width is 1-1/8".
- Strike mounting plate measures 2-1/8" by 1". Strike projection is 1-3/4".
- Each latch uses 6 each #8 flat head screws (not included but offered for purchase during checkout).
|
|
Icebox and Hoosier Hinge
|
Description:
|
Finishes: |
|
- For flush mounted, 180 degree opening doors.
- Overall length is 3-1/2”.
- Solid brass.
- #5 x 1/2” flat head screws are included.
|
|
Icebox and Hoosier Hinge, Oval
|
Description:
|
Finishes: |
|
- 3/8” offset for offset doors.
- Overall length is 4”.
- Solid brass.
- #6 x 3/4” flat head screws are included.
|
|
|
Weld-On Hinges, Roller Bearing
|
Description:
|
Finishes: |
|
- Pivot type welding hinge with roller bearings.
- Available in a 3" or a 4" size.
- The 3" size has a sealed roller bearing that measures 1-3/8" outside diameter by .622" inside diameter by .43" thick. Uses a 1/2" x 4" pivot bolt. Post side welding plate measures 1.5" x 3.5". Gate side welding plate measures 1.5" x 2.75". The spacing between the gate and post is 2.71".
- The 4" size has a sealed roller bearing that measures 1.849" outside diameter by .786" inside diameter by .55" thick. Uses a 5/8" x 5" pivot bolt. Post side welding plate measures 2" x 4.25". Gate side welding plate measures 2" x 3.25". The spacing between the gate and post is 4.25".
- Both hinges feature a 220 degree swing range. Both hinges use a nylon locking nut on the bottom of the pivot bolt.
- Made from steel base material.
- These hinges are sold by the pair which means two hinges. A pair is normally what you need to hang one gate.
- Weight ratings are based on using a pair of hinges.
- Hinges are made in the U.S.A.
|
|
Barrel Hinges Weld-On
|
Description:
|
|
|
- Weld-on barrel hinge is a lift off pivot hinge.
- Features a round barrel body.
- Made from steel base material.
- Hinge pin is made from stainless steel.
- Hinge pin pivots on a ball bearing.
- Features a "zerc" type grease fitting.
- The hinge pin is fixed in one of the barrels. In the photo to the left the barrel with the fixed hinge pin is the barrel on top.
- The "Hinge Gap" is the distance between the post and the gate after the hinge is installed.
- Each hinge has 2 weldable plates. Each plate measures as follows; SKU 782000 measures 1" x 2" x 3/8" and SKU 782002 measures 1-1/2" x 3" x 3/8".
- SKU #782000 use for gates up to 8-10 feet wide
- SKU #782002 use for gates up to 15-17 feet wide
|
Welding Hinge, Two Piece Steel
|
Description:
|
|
|
- This 2-piece weld-on hinge is extremely popular because of its high weight load capacity as well as it professional appearance.
- Ideal for gates, machinery doors, barbeque pits, electrical boxes, and trailers.
- It can be welded on as a lift-off hinge or it can be permanently mounted.
- Made from mild steel (1015) with a case hardened fixed steel pin and a brass washer.
- Weight rating shown is for a pair of hinges. A pair of hinges is two hinges.
- The "S-dimension" is the diameter plus the welding area.
|
Welding Hinge, Two Piece Stainless Steel
|
Description:
|
|
|
- This 2-piece weld-on hinge is extremely popular because of its high weight load capacity as well as it professional appearance.
- Ideal for gates, machinery doors, barbeque pits, electrical boxes, and trailers.
- It can be welded on as a lift-off hinge or it can be permanently mounted.
- Made from stainless steel (Type 304) with a case hardened fixed stainless steel pin and a stainless steel washer.
- Weight rating shown is for a pair of hinges. A pair of hinges is two hinges.
- The "S-dimension" is the diameter plus the welding area.
|
Barrel Weld-On Hinge, Ball Bearing
|
Description:
|
Finishes: |
|
- Super heavy duty weld-on pivot hinge for very heavy gates.
- Hinge measures 7" tall by 2.5" in diameter. Each weld-on plate measures 2.75" tall by 2" wide.
- The hinge pin is made from stainless steel, is 1.25" in diameter and rides on a 1" diameter ball bearing.
- Barrels are made from cold rolled carbon steel.
- Maximum gate weight is 3000 lbs per pair of hinges.
- Includes a "zerk" type fitting so that the hinge may be lubricated with a grease gun.
- Hinges are made in the U.S.A.
- These hinges are sold by the pair which means two hinges. A pair is normally what you need to hang one gate. A pair of these hinges weighs about 22 lbs.
|
|
Weld-On Hinges Heavy Duty
|
Description:
|
|
|
- heavy duty weld-on hinges
- fast spun pin
- for heavy duty applications
- not swaged for mortising
- no holes
- hinge widths are approximately 1/8” less than nominal sizes shown
- all sizes have five knuckles
|
Single Acting Spring Hinge (Weldable)
|
Description:
|
Finishes: |
|
- Non-template hinge, for wood doors. Hinges have screwholes but are also weldable for metal gates.
- Pivot points do not align with standard full mortise hinges. These hinges cannot be mixed with other types of hinges on the same door.
- Large diameter barrel matches older style single acting pivot hinges.
- Steel base material.
- The 3” hinge comes with wood screws.
- The 6” and 7" size come with machine screws.
- The "Size" dimension is the height of the plate that mounts on the door and jamb.
- The 3" hinge maximum door weight is 45lbs using 2 hinges and 65lbs using 3 hinges.
- The 6" hinge maximum door weight is 125lbs using 2 hinges and 155lbs using 3 hinges.
- The 7" hinge maximum door weight is 130lbs using 2 hinges and 175lbs using 3 hinges.
|
- 601 (US1B) bright black japanned
- 600 (USP) primed for painting.
|
Single Acting Spring Hinge, Reverse Action (Weldable)
|
Description:
|
Finishes: |
|
- This hinge has a reverse action spring which means that the spring action works to open the door.
- Non-template hinge, for wood doors. Hinges have screwholes but are also weldable for metal gates.
- Pivot points do not align with standard full mortise hinges. These hinges cannot be mixed with other types of hinges on the same door.
- Steel base material.
- Wood screws are included on the 3" size.
- Machine screws are included on the 6" size.
- The "Size" dimension is the height of the plate that mounts on the door and jamb.
- The 3" hinge maximum door weight is 45lbs using 2 hinges and 65lbs using 3 hinges.
- The 6" hinge maximum door weight is 125lbs using 2 hinges and 155lbs using 3 hinges.
|
- 652(US26D) Satin Chrome
- 601(US1B) Bright Black Japanned
|
Welding Hinges, Heavy Duty, Tight Pin
|
Description:
|
|
|
- Heavy duty blank weld-on hinges.
- Fast-spun pin, non-removeable.
- Non-swagged heavy hinge is designed for surface application by welding on metal.
- Made from cold rolled steel, not plated.
- All sizes have 5 knuckles.
- Weight rating applies to the use of 1, 2 or 3 hinges per hinged device. For example if the weight rating for one hinge is 40 lbs then the weight rating for 3 hinges is 120lbs. The weight ratings are do not apply to the use of more than 3 hinges.
|
Welding Hinges, Heavy Duty, Removable Pin
|
Description:
|
|
|
- Heavy duty blank weld-on hinges.
- Hinge pin is removable.
- Non-swagged heavy hinge is designed for surface application by welding on metal.
- Made from cold rolled steel, not plated.
- All sizes have 5 knuckles.
- Weight rating applies to the use of 1, 2 or 3 hinges per hinged device. For example if the weight rating for one hinge is 40 lbs then the weight rating for 3 hinges is 120lbs. The weight ratings are do not apply to the use of more than 3 hinges.
|
Stainless Steel Weld-On Hinge, 4" Flag
|
Description:
|
Finishes: |
|
- Stainless steel flag hinge for welding.
- Made from type 304 stainless steel.
- Hinge is 4" tall by 2.5" wide. Click on link below for more dimensions.
- Hinge pin is fixed in bottom leaf. Top leaf will "lift off" bottom leaf.
- Top leaf rides on a ball bearing fixed to the top of the hinge pin.
- A pair of these hinges has a weight rating of 88 lbs.
- These hinges are available in either a Left Hand or Right Hand model as shown in photo.
- These hinges are sold by the "each". You would normally order 2 hinges per door you are hinging.
|
|
Stainless Steel Weld-On Hinge, 6" Flag
|
Description:
|
Finishes: |
|
- Stainless steel flag hinge for welding.
- Made from type 304 stainless steel.
- Hinge is 6" tall by 2.5" wide. Click on link below for more dimensions.
- Hinge pin is fixed in bottom leaf. Top leaf will "lift off" bottom leaf.
- Top leaf rides on a ball bearing fixed to the top of the hinge pin.
- A pair of these hinges has a weight rating of 198 lbs.
- These hinges are available in either a Left Hand or Right Hand model as shown in photo.
- These hinges are sold by the "each". You would normally order 2 hinges per door you are hinging.
|
|
|
Shower Door Hinge, Glass to Wall
|
Finishes: |
|
- Bright Chrome
- Brushed Nickel
|
Shower Door Hinges, 180 Degree, Glass to Glass
|
Finishes: |
|
- Brushed Nickel
- Oil Rubbed Bronze
|
Shower Door Hinges, 135 Degree, Glass to Glass
|
Finishes: |
|
- Bright Chrome
- Brushed Nickel
- Polished Brass
- Oil Rubbed Bronze
|
Shower Door Hinges, 90 Degree, Glass to Glass
|
Finishes: |
|
- Bright Chrome
- Brushed Nickel
- Polished Brass
|
|
|
|
