| |
|
 | | |
- - WHAT IS A PAIR OF HINGES?
DOOR HINGES
Baldwin Hinges
Plain Bearing Butt Hinges
Ball Bearing Butt Hinges
Spring Hinges - Double Acting Hinges
Pivot Hinges - Pivot Sets
Screen Door Hinges - Screen Door Locks
Wide Throw Hinges - Swing Clear Hinges
Special Purpose Hinges
Invisible Hinges and Soss Hinges
Door Hardware
CABINET HINGES
Semi Concealed Cabinet Hinges
Surface Mounted Cabinet Hinges
Overlay Hinges - Inset Hinges
Demountable Hinges
Youngdale Hinges
European Hinges - Blum Hinges
Pivot Hinges for Cabinets
Pivot Door Slides - Flipper Door Slides
Entertainment Center Cabinet Hinges
Small Ball Tip Cabinet Hinge
Tray Hinges - Other Cabinet Hardware
FURNITURE HINGES
Table Hinges - Shelf Hinges
Butler Tray Table Hinge
Finial Tipped Hinges
Desk Hinges - Sewing Machine Hinges
Concealed Hinges - Hidden Hinges
Special Purpose Furniture Hinges
Lift-off Hinges - Loose Joint Hinges
Glass Door Hinges
GATE HINGES AND HARDWARE
Gate Latches - Gate Locks
Bolt, Screw, Strap & Pintle Hinges
Gate Strap Hinges
Gate Tee Hinges
Gate Pivot Hinges
Swimming Pool Gate Hinges - Latches
Gate Spring Hinges
Cane Bolts - Gate Wheels - Gate Closers
Gate Grills -Gate Handles -Gate Pulls -Gate Stops
Solid Bronze Gate Hardware
SPECIALTY HINGES
Small Butt Hinges
Piano Hinges - Continuous Hinges
Soss Hinges & Other Invisible Hinges
Strap Hinge - Dummy Strap Hinges
No Mortise Hinges - Bi-Fold Door Hinge
Tee Hinges
Chest Hinges - Box Hinges - Lid Supports
Garage Door Hinges
Folding Screen Hinges
Refrigerator Hinges - Ice Box Hinges
Weld-on Hinges - Welding Hinges
Shower Door Hinges
SHUTTER & WINDOW
Shutter Hinges, Interior
Shutter Hinges, Exterior
Shutter Dogs, Exterior
Shutter Hardware, Exterior
Window Hinges
Window Hardware
Truth Window Hardware
SCREWS
STAINLESS STEEL HINGES & HARDWARE
Butt, Strap & Tee Hinges, Stainless
Gate Hardware & Hinges, Stainless
Cabinet & Furniture Hardware & Hinges, Stainless
Window & Shutter Hardware & Hinges, Stainless
Industrial Hinges, Stainless
Screws, Stainless Steel
| | |
Recent Customer Feedback:
I have to say that I am not only
impressed by the stock that you
offer but that I am thrilled by the
fact that you have delivered what
I ordered when I asked that it be
delivered. With all of the "big box"
home improvement centers
replacing the older hardware
stores it has become increasingly
tougher to find repair parts. After
surfing your site a bit it is obvious
that you folks are a place that I will
recommend to my buddies for their
cabinet repair and construction
needs. Thanks so much for taking
such excellent care of me. - Joe
How fast and helpful you have
been in helping me, not only to
get info on your product but also
the web site to help me build the
door/bookshelf I wanted to
achieve. Thank you for your quick
and accurate help. -Jill O'Brien
Thank you for the prompt response.
If I can't find 'em, I'll be back for
the bigger hinges and just recut the
doors. Thanks again. Your customer
service makes you stand out from
your competitors. -Dennis Fitch
|
|
|
CABINET HINGES
 Reverse Bevel, Variable Overlay Hinge
3/8 Inch Inset Self-Closing
|
Description:
|
|
|
14 Styles and 13 Different Finishes |
3/8 Inch Inset Non-Self Closing
|
Description:
|
|
|
7 Styles and 8 Different Finishes |
1/2 Inch Inset Hinges
|
Finishes: |
|
- Satin Nickel
- Brass Plated
- Chrome Plated
- Antique Brass
- Oil Rubbed Bronze
|
5/8 Inch Inset Hinges
|
Finishes: |
|
- Satin Nickel
- Brass Plated
- Chrome Plated
- Antique Brass
- Oil Rubbed Bronze
|
3/4 Inch Inset Hinges
|
Finishes: |
|
- Satin Nickel
- Brass Plated
- Chrome Plated
- Antique Brass
- Oil Rubbed Bronze
|
Variable Overlay Self Closing
|
Description:
|
|
|
19 Styles and 21 Different Finishes |
Variable Overlay Non-Self Closing
|
Description:
|
|
|
4 Styles and 5 Different Finishes |
|
H Hinges and HL Hinges (both flush and offset)
|
Description:
|
|
|
20 Styles and 8 Different Finishes |
3/8" Offset Hinges
|
Description:
|
|
|
|
Ornamental Hinges
|
Description:
|
|
|
|
No-Bore Concealed Hinges
|
Description:
|
|
|
|
|
Overlay Hinges, Partial Wrap
|
Description:
|
|
|
|
Inset Hinges, Partial Wrap
|
Description:
|
|
|
|
|
Single Demountable 1/4" Overlay Hinge
|
Description:
|
Finishes: |
|
- Self Closing Hinge
- 1/4" Overlay
- Hinge measures 2-1/4" tall
- Joint length is 1-7/8"
- Screws are included for the face frame wing of the hinge.
- Steel base material
- Single demountable hinges use an insert that slides into a slot that is cut into the edge of the door. They are held in place by tightening a machine screw.
- Single demountable hinges attach to the face frame of the cabinet with two wood screws in the normal way.
|
- Nickel
- Brass
- Oil Rubbed Bronze
|
Single Demountable 1/2" Overlay Hinge
|
Description:
|
Finishes: |
|
- Self Closing Hinge
- 1/2" Overlay
- Screws are included
- Hinge measures 2-1/4" tall
- Joint length is 1-7/8"
- Steel base material
- Single demountable hinges use an insert that slides into a slot that is cut into the edge of the door. They are held in place by tightening a machine screw.
- Single demountable hinges attach to the face frame of the cabinet with two wood screws in the normal way.
|
- Nickel
- Burnished Brass
- Brass plated
- Oil Rubbed Bronze
|
Double Demountable 1/4" Overlay Hinge
|
Description:
|
Finishes: |
|
- Double demountable hinges mount with two inserts, one in a slot on the edge of the face frame and the other in a slot on the edge of the door.
- Self closing hinge
- 1/4" overlay
- No screws needed
- Hinge measures 2-1/4" tall
- Joint length is 1-7/8"
- Steel base material
- for information on how to measure your overlay, click on the link below.
|
- Satin Nickel
- Brass plated
- Oil Rubbed Bronze
|
Double Demountable 1/2" Overlay Hinge
|
Description:
|
Finishes: |
|
- Double demountable hinges mount with two inserts, one in a slot on the edge of the face frame and the other in a slot on the edge of the door.
- Self Closing Hinge
- 1/2" Overlay
- No screws are needed
- Hinge measures 2-1/4" tall
- Joint length is 1-7/8"
- Steel base material
|
- Brass plated
- White
- Antique English
- Burnished Brass
- Polished Chrome
- Wrought Iron
- Oil Rubbed Bronze
- Satin Nickel
|
Double Demountable 5/8" Overlay Hinge
|
Description:
|
Finishes: |
|
- Double demountable hinges mount with two inserts, one in a slot on the edge of the face frame and the other in a slot on the edge of the door.
- Overlay dimension is 5/8".
- No screws are needed
- Hinge measures 2-1/4" tall
- Hinge pin length is 1-7/8"
- Steel base material
- PLEASE NOTE: THIS HINGE HAS BEEN DISCONTINUED BY THE MANUFACTURER. WE ARE CURRENTLY SEARCHING FOR A REPLACEMENT.
|
|
3/8" Inset Hinge, Double Demountable
|
Description:
|
Finishes: |
|
- Double demountable hinges mount with two inserts, one in a slot on the edge of the face frame and the other in a slot on the edge of the door.
- Self Closing Hinge
- 3/8" Inset
- No screws are needed for double demountable hinges
- Hinge measures 2-1/4" tall
- Joint length is 1-7/8"
- Steel base material
- PLEASE NOTE: this hinge is made for partial inset doors. Partial inset doors have a rabbet (or cutout) around the entire edge of the door. This rabbet allows the door, when closed, to fit partially into the door opening and creates a "lip" which partially overlays the door opening.
|
- Satin Nickel
- Burnished Brass
- Brass plated
- Oil Rubbed Bronze
|
3/8" Inset Hinge, Single Demountable
|
Description:
|
Finishes: |
|
- Self Closing Hinge.
- 3/8" Inset.
- Screws are included.
- Hinge measures 2-1/4" tall
- Joint length is 1-7/8"
- Steel base material
- Single demountable hinges use an insert that slides into a slot that is cut into the edge of the door. They are held in place by tightening a machine screw.
- Single demountable hinges attach to the face frame of the cabinet with two wood screws in the normal way.
- PLEASE NOTE: this hinge is made for partial inset doors. Partial inset doors have a rabbet (or cutout) around the entire edge of the door. This rabbet allows the door, when closed, to fit partially into the door opening and creates a "lip" which partially overlays the door opening.
|
- Satin Nickel
- Brass plated
- Oil Rubbed Bronze
|
Single Demountable, Reverse Bevel, Hinge
|
Description:
|
Finishes: |
|
- This hinge is made for "30 Degree Reverse Bevel" Doors attached with a single demountable hinge.
- Single demountable hinges mount with an "insert" in the door and a single screw on the edge of the cabinet opening.
- Hinge is self-closing.
- These hinges are sold by the pair (2 hinges). One wood screw is included with each hinge.
- Hinge measures 2-1/4" tall and approximately 1-3/4" wide. Made from steel base material.
- The overlay dimension is 13/32".
|
|
Variable Overlay, Single Demountable Hinge
|
Description:
|
Finishes: |
|
- Variable overlay self-closing hinge.
- Hinge attaches to face frame with screws and to door with demountable insert.
- Face frame screw holes are 2-1/8" center-to-center.
- Hinge measures 2-3/4" tall by 1-5/8" wide.
- Made from steel base material.
- Uses 4 each #5 flat head screws per pair of hinges. Screws are not included but are offered for purchase during checkout. Use our SKU #400997 screws.
|
|
|
Youngdale Hinges
|
Description:
|
Finishes: |
|
- Youngdale Hinge Company hinges are made in the USA. They are an excellent alternative to European style hinges if you want an almost concealed hinge look. New installations are much easier than European style hinges. A table saw and some moderate wood working skills are all that is required.
- If you are replacing hinges, your hinge style will be stamped on the body of your hinge. Simply match the style number and finish with our listing below.
- Styles #3, #5, #65, #6 and #8 are for use on overlay doors. Click on links below to see various installation examples.
- Style #4 is for use on lip type doors incorporating a 3/8" inset. This type of door is also known as a 3/8" partial inset door. Click on link below to see installation examples.
- Youngdale hinges require a sawcut in the edge of the cabinet door which is only slightly visible from the side view. The hinge is completely hidden in frontal view.
- Youngdale hinges work for both cabinets with face frames and for frameless cabinets (non-face frame). Click on links below to see install info.
- With the exception of the #65 hinge, Youngdale hinges are not handed. The same hinge will work on either a left hand or right hand door. They are self-closing. The #65 is available in a non-handed version (found in this section) or in a handed version (Left Hand and Right Hand) found in the section below.
- Steel base material.
- Matching screws are included (8 screws per pair of hinges). Nickel plated screws are included with the white hinges.
|
- Nickel Plated
- Antique Brass
- Brass Plated
- White (powder coated)
|
Youngdale #65 Hinges, Handed Version
|
Description:
|
Finishes: |
|
- The #65 Youngdale hinge is available in a Left Hand model and a Right Hand model.
- Both hinges are a "Wrap Around" type hinge made for a face frame that is 3/4" thick.
- If you are replacing your hinges you will notice that the hinge plate that is fastened to the inside of your door is stamped with the model number.
- The Right Hand model will be stamped with a "65" and an "R".
- The Left Hand model will be stamped with "65" and a "L".
- Matching screws are included (8 screws per pair of hinges).
- PLEASE NOTE; these hinges are sold by the pair which means two complete hinges. For example, when you order a pair of "Left Hand" hinges you get two "Left Hand" hinges.
|
|
|
Blum "Compact 33" Hinges
|
Description:
|
|
|
Blum Compact 33 hinges are the most popular choice of hinges for American style face frame cabinets. |
Blum Compact 38 Hinges
|
Description:
|
|
|
Blum Compact 38 hinges are a one-piece (hinge and mounting plate are combined) compact European hinge made for face frame cabinets. |
European Compact Hinges (One Piece), Generic
|
Description:
|
|
|
European hinges, compact style for face frame cabinets. These hinges are for specific overlays from 1/2" to 1-3/8". These hinges are a one piece hinge, the hinge and mounting plate are combined. |
.jpg)
European Compact Hinges (Two Piece), Generic
|
Description:
|
|
|
European hinges, compact style for face frame cabinets. These hinges are for specific overlays of 1/2" and 3/4". These hinges are a two piece hinge, the hinge and mounting plate are separate pieces (they are not able to be disassembled however). |
European Overlay Hinges, Generic
|
Description:
|
|
|
European long arm hinges for overlay doors. Available in 3 opening angles (110, 125 and 170 degrees). For both full overlay and half overlay doors on cabinets without a face frame. |
European Inset Hinges, Generic
|
Description:
|
|
|
European long arm hinges for inset doors. Available in 2 opening angles (110 and 170 degrees). For full overlay doors on cabinets without a face frame. |
European Face Frame Hinges, Generic
|
Description:
|
|
|
European long arm hinges for overlay doors on cabinets with a face frame. Available in 110 degree and 170 degree opening hinges. |
Blum "Clip Top" Hinges
|
Description:
|
|
|
Blum European style hinges are available for "face frame" or "frameless" style cabinets in a 120 degree opening or a 170 degree opening hinge. |
Blum "Clip Top" Hinges for Thick Doors
|
Description:
|
|
|
Blum European hinges for doors that are thicker than normal. Minimum door thickness is 3/4" (19mm). Maximum door thickness is 1-1/8" (30mm). |
Blumotion Soft Close for Cabinets
|
Description:
|
|
|
When used with Blum hinges the Blumotion Soft Close device allows for a smooth, silent close, no matter how hard the door is closed.
|
Grass European Hinges
|
Description:
|
|
|
Grass 830 and 831 are no longer available. They can be replaced by our Compact 33 hinges. Click here to find out more. |
Corner Hinges - Pie Cut Corner Hinges
|
Description:
|
|
|
Hinges designed for kitchen corner cabinets. Also known as "Pie Cut Corner" hinges.
|
European Hinge for Face-Frame Cabinets with Inset Doors
|
Description:
|
|
|
If you have face-frame cabinets you can use European hinges on "inset" doors with our hinges and adapter plates. |
Stainless Steel European Hinges
|
Description:
|
|
|
Stainless steel European hinges are great for marine use, outdoor use or any area that has a corrosive environment. |
Mini European Hinges, 1 Inch (26mm) Cup
|
Description:
|
|
|
Most European hinges fit into a 1-3/8" cup drilled in the back of the door. These miniature European hinges fit into a 26 mm or 1" cup. Available in Full Overlay, Half Overlay and Inset Versions. |
Blum European Glass Door Hinges
|
Description:
|
|
|
European style glass door hinges for inset, overlay and twin overlay glass doors. Made by Blum.
|
Aximat Hinges
|
Description:
|
|
|
Aximat hinges are available in two types; one type is for wood doors; another type is for glass doors. |
35mm Forstner Bit for Euro Hinges
|
Description:
|
|
|
- High speed steel forstner bit for cutting 35mm (1-3/8") cup for European hinges.
- Fits 3/8" drill chuck.
- Product works best with a drill press however it is possible to use it with a portable power drill.
- Made by Bosch.
- PLEASE NOTE: This product is meant for use on hardwoods and softwoods. It is not meant for use on particle board or MDF materials. It is actually sized as a 1-3/8" cutter. This size works perfectly for a 35mm European hinge.
- For Amerock, Belwith, Blum, Grass, Liberty, Mepla, Hafele and other hinges
- PLEASE NOTE: Our normal return policy does not apply to this item. This item is NOT returnable.
|
40mm Bit for European Hinges
|
Description:
|
|
|
- Carbide tipped drill bit for cutting 40mm holes for European hinges.
- Fits 3/8" drill chuck.
- Bit is 2-3/16" in length.
- PLEASE NOTE; Our normal return policy does not apply to this item. This item is NOT returnable.
|
|
Heavy Duty Reversible Pivot Hinge
|
Description:
|
Finishes: |
|
- For 1-1/8" to 1-3/8" thick doors
- Reversible (non-handed) for Right Hand or Left Hand installations
- For doors up to 60" high (75lb maximum weight)
- For overlay type installations
- Made from 0.125" steel
- Wood screws are included
- Horizontal piece (as shown in photo) measures 2-1/2" x 1"
- Vertical flat piece (which mounts to wall) measures 3" x 7/8"
- Rounded piece projects from wall 2-1/2"
- Sold by the pair. A pair is what is required to install one door.
|
- Satin Chrome
- Polished Brass
|
Heavy Duty Pivot Hinge
|
Description:
|
Finishes: |
|
- For 1-1/8" to 1-3/8" thick door.
- Heavy duty pivot hinge can be used for flush, recessed, or overlay type installations.
- These pivot hinges are handed (Right Hand or Left Hand). Hinge in photo shows Left Hand set.
- Made from 0.127" steel
- Wood screws are included
- Approximate measurements for top pivot: 2-1/2" long, 2-3/8" wide and 1" tall.
- Approximate measurements for bottom pivot; 2-1/2" long, 2-5/16" wide and 1-1/2" tall.
- Complete instructions are included.
- Sold by the pair. A pair is what is needed to install one door.
|
- Satin Chrome
- Polished Brass
|
Heavy Duty Pivot Hinge w/Legs
|
Description:
|
Finishes: |
|
- For 1-1/8" to 1-3/8" thick door.
- Heavy duty pivot hinge can be used for flush or recessed type installations.
- These pivot hinges are handed (Right Hand or Left Hand). The hinge in the photo shows a Left Hand hinge.
- Made from 0.125" steel.
- Wood screws are included.
- Approximate measurements for top pivot; 2-1/2" long by 2-1/8" wide.
- Approximate measurements for bottom pivot; 2-1/2" long by 3" tall by 2-1/8" wide.
- Complete instructions are included.
- Sold by the pair. A pair is what is needed to install one door.
|
- Satin Chrome
- Polished Brass
|
Extra Heavy Duty Reversible Pivot Hinge
|
Description:
|
Finishes: |
|
- For doors up to 159 lbs
- For overlay doors 1-3/8" to 1-3/4" thick
- Doors can be installed floor to ceiling
- Full 180 degree opening
- Made from 0.182" steel
- Extra long screws are included
- Horizontal piece (as shown in photo)measures 3" by 1-1/2"
- Vertical flat piece (which mounts to wall) measures 3" x 1-1/8"
- Rounded piece projects from wall 3"
- Sold by the pair. A pair is what is needed to install one door.
|
- Satin Chrome Plated (US26D)
|
Light Duty Pivot Hinges-
|
Description:
|
Finishes: |
|
- variable overlay
- for 3/4” doors
- for left- or right-hand doors
- flat head wood screws (#6 x 5/8”) included
- elongated screw holes for adjustment during installation
- steel base material
|
- Zinc Plated
- Burnished Brass
|
Light Duty Pivot Hinges
|
Description:
|
Finishes: |
|
- 23/32” overlay
- for 3/4” doors
- for left- or right-hand doors
- flat head wood screws (#6 x 5/8”) included
- elongated screw holes for adjustment during installation
- steel base material
|
- Zinc Plated
- Burnished Brass
|
Right Angle Pivot Hinge
|
Description:
|
Finishes: |
|
- Right angle or "L" type pivot hinge.
- Allows doors to be set back and swing clear of corner posts.
- Hinge is handed and sold by the pair. You will receive one "left hand" and one "right hand" hinge for each pair ordered.
- Steel base material.
- Uses #4 flat head wood screws (not included but offered for purchase during checkout). Order our SKU 286253 for #4 x 5/8 bronze flat head wood screws. Order 8 screws for each pair of hinges ordered.
- For dimensions click on link below
|
|
Center Pivot Hinge
|
Description:
|
Finishes: |
|
- Pivot hinge has two parts a leaf and pivot pin and a metal cup which holds the pivot pin.
- The leaf measures 2" by 3/8" by 1/8" thick.
- The cup is 3/8" tall by 3/8" in diameter.
- Steel base material.
- Uses a #5 flat head wood screw (not included but offered for purchase during checkout)
- Order our SKU #286254 #5 x 5/8" bronze wood screw for this hinge. Each hinge takes 2 wood screws.
|
|
Rear Pivot Hinge
|
Description:
|
Finishes: |
|
- Rear pivot hinge is made up of a wrap around leaf with a pivot pin and a knurled metal cup that holds the pivot pin.
- The wrap around leaf measures 2" by 7/16" with a about a 1/2" distance to the wrap around.
- The knurled metal cup is about 3/8" in diameter and fits in a 1/4" deep drilled hole.
- The wrap around leaf mounts to the back of the door.
- This hinge uses 2 each #6 x 5/8" Round Head Bronze plated screws per hinge (not included but offered for purchase during checkout). Order our SKU 286252 if you need screws.
- Steel base material.
|
|
Knife Type Pivot Hinge
|
Description:
|
Finishes: |
|
- Steel base material.
- Size of each hinge is 1/8" thick, 3/8" wide, 2-1/4" long.
- Each hinge uses 6 each #4 flat head screws (not included but offered for purchase during checkout). Order our SKU #286253.
|
|
Pivot Hinge 270 Degree
|
Description:
|
Finishes: |
|
- Made for overlay cabinet doors up to 1” thick
- Hinge pivots 270 degrees
- The plate that attaches to the cabinet measures 1-1/4" x 1". The plate that attaches to the door measures 1-3/8" x 7/8". The pivot point projects out 1-7/16" from the cabinet surface
- Steel base material
- Screws not included
- Uses 12 each #6 screws per pair of hinges(not included). We have not been able to find an exact finish match for the screws. We offer solid brass screws upon checkout which is fairly good match for the finish but not an exact match.
|
|
Pivot Hinges, Corner Type, Stainless Steel
|
Description:
|
|
|
- Pivot hinge is made for use with 3/4” or 7/8” material.
- Made from Type 430 stainless steel.
- Natural finish.
- Uses #5 flat head wood screws (not included)
- Picture shown is right hand model.
- When ordering hinges for your door order either 2 left hand hinges for the same door or two right hand hinges for the same door.
|
Wood Door Pivot Hinge
|
Description:
|
Finishes: |
|
- Hinge can be used for trash receptical doors, pet doors or any small pivot door.
- Made from steel base material.
- Concealed pivot hinge is for inset doors with a maximum door thickness of 1".
- Drill 7mm (9/32") hole for plastic bushing.
- Pan head wood screws are included.
|
|
Large Pivot Hinges
|
Description:
|
Finishes: |
|
- For large cabinet doors and full size doors
- Made of solid brass with steel pins
- Flat head wood screws are included
- For SKU numbers 838198 to 838242 the pivot screw is flush with the hinge (as shown in photo to left).
- For SKU numbers 838250 to 838252, the pivot screw has a raised slotted head which measures about 3/4" in diameter and is 3/16" above the hinge surface. This large pivot hinge pivots on roller bearings. A pivot base is available for these 3 SKU numbers only. It is offered for purchase during checkout.
- For tall doors an intermediate pivot hinge is recommended to keep the middle part of the door in alignment. Our SKU's 838204 through 838206 will work with any of the pivot hinges in this section. Intermediate pivots are offered for purchase during checkout.
- The listed weight ratings are for a pair of hinges.
|
- Polished Brass
- Satin Nickel
- Oil Rubbed Bronze
|
Pivot Base for Large Pivot Hinges
|
Description:
|
Finishes: |
|
- This pivot base is used with our Large Pivot Hinges (SKU numbers 838250, 838251 and 838252 only).
- The pivot base replaces one leg of the pivot hinge (the non-door leg) to allow an easier installation if installing in concrete, marble, stone or any other material where a smaller cutout is desired.
- Pivot base measures approximately 1.25" in height by 1" in diameter at the top and 3/4" in diameter at the bottom.
- Made from solid brass.
|
- Polished Brass
- Oil Rubbed Bronze
- Satin Nickel
|
Intermediate Pivot Hinge
|
Description:
|
Finishes: |
|
- These intermediate pivots work only with our pivot hinges in the SKU range from 838198 to 838252.
- An intermediate pivot hinge is used for taller doors to keep the middle part of the door in alignment with the pivot hinges at the top and bottom of the door.
- Made from solid brass material.
- Includes matching wood screws.
- Each hinge leaf measures 2-1/2" tall by 1-1/4" wide by 5/16" thick. Total width of hinge including hinge barrel is 2-1/2".
|
- Satin Nickel
- Polished Brass
- Oil Rubbed Bronze
|
Small Spring Loaded Pivot Hinge
|
Description:
|
Finishes: |
|
- Small spring loaded pivot hinge for inset doors
- The hinge is made of two parts; a spring loaded pin housing and a plastic bushing (pin receiver)
- Both hinge parts install by drilling a hole and press fitting them in place
- The spring loaded pin housing measures 1-3/8" long by 1/4" diameter. The pin diameter is 5/32" and projects 1/4"
- The plastic bushing is 7/16" in outside diameter
- Maximum door opening is approximately 140 degrees
- This hinge will work on door thicknesses ranging from 1/2" to 13/16"
- This hinge is made of plastic with a steel pin and spring.
- Hinge is sold by the pair. Order 1 pair per door.
- Tab adjustment screw is not included.
- PLEASE NOTE: This hinge is not a "self-closing" hinge. The spring is in the pin receiver and is meant only to keep the pin in place after installation.
|
|
Semi-Concealed Pivot Hinge
|
Description:
|
Finishes: |
|
- Semi-concealed pivot hinge, only the tip shows through from the cabinet front.
- To install cut an angled 7/32" slot through the edge of the door.
- For door thickness of 5/8" to 3/4"
- Door opens 270 degrees when installed on a 5/8" door.
- Door opens 255 degrees when installed on a 3/4" door.
- Hinges measures approximately 1-3/4" tall and 2" wide as shown in photo.
- This hinge is sold by the pair. A pair includes a top hinge (as shown in photo) and a bottom hinge. The hinges are not handed, they will work on both a left hand and right hand door.
- Steel base material.
- Uses #6 Oval Head wood screws (not included). Order our SKU #400993 for a screw in an oil rubbed bronze finish that is a good match. Order 12 screws per pair of hinges. Screws are offered for purchase during checkout.
|
|
Pivot Hinge, Wrap Around
|
Description:
|
Finishes: |
|
- This hinge is for a full overlay door with no cabinet face frame.
- Works on door thicknesses up to 3/4"
- Wrap around feature assures that all screws go into solid wood rather than end grain
- Small leaf measures 2" by 3/8"
- Large leaf measures approximately 1-7/8" by 1-1/8".
- Hinge is sold by the pair. A pair includes a top pivot and a bottom pivot.
- Photo shows the top pivot
- Product uses 12 each #5 Flat Head wood screws per pair of hinges(not included but offered for purchase during checkout). Order our #5 x 5/8" Bronze plated flat head wood screw SKU # 286254.
- Steel base material.
|
|
Face Frame Pivot Hinge
|
Description:
|
Finishes: |
|
- For cabinets with a face frame
- Steel base material with plastic spring mechanism
- Matching wood screws are included
- SKU number 399955 is for a 3/8" partial inset door
- SKU numbers 399950, 399960 and 399965 are for overlay doors
- These hinges are not handed
- If you are trying to match an existing hinge look for the style number stamped on your hinge.
|
|
Overlay Pivot Hinge, Stainless Steel
|
Description:
|
Finishes: |
|
- Overlay door pivot hinge, made from Type 430 stainless steel.
- IMPORTANT, PLEASE NOTE; These hinges are "handed". Order one left hand (SKU 658003)and one right hand hinge (SKU 658017) for each door you are installing.
- PLEASE NOTE; the handing refers to where the hinge is located not whether the door is a left hand or right hand door. If you order a left hand hinge and a right hand hinge you can hinge either a right hand door or a left hand door.
- Made for 3/4" thick doors.
- May be used as a 270 degree hinge if the pivot point is located just outside of the cabinet corner.
- Each hinge uses 6 each #8 flat head screws. Not included but offered for purchase during checkout.
|
|
Pivot Hinge, 3/8" Partial Inset Doors
|
Description:
|
Finishes: |
|
- Pivot hinge is made for 3/8" partial inset doors (also known as 3/8" inset doors with a 3/8" lip)
- Made for use on 3/4" thick doors.
- Sold as a pair which includes a left hand hinge (marked with a "L") and a right hand hinge (marked with a "R")
- If the hinges are used on horizontally swinging doors the left hand hinge is used as the top pivot and the right hand hinge is used as the bottom pivot.
- The photo to the left shows the "Left Hand" hinge. The bottom leaf attaches to the edge of the face frame. The top leaf attaches to the back of the door.
- The pivot point of the hinge installs in a 1/4" slot cut in the lip of the door from the backside of the door.
- If you are replacing old hinges your hinge should have the number "1247" stamped on it (usually not visible when the hinge is installed).
- Matching wood screws are included (8 screws per pair). Made from steel base material.
|
|
Large Center Pivot Hinge
|
Description:
|
Finishes: |
|
- Pivot hinge for windows and cabinet doors allows door to pivot up to 360 degrees depending on installation of door in frame.
- Hinge is 4-5/8" long by 7/8" wide.
- Hinge is 9/16" thick at thickest point.
- The gap between the two leaves is 1/16". Hinge may be mortised into the bottom of the door and the frame for a minimum gap.
- Made from 1/8" thick material.
- Hinge pivots on an oilite, self-lubricating bearing.
- Flat head wood screws are included.
- Available in two models; solid brass or steel.
- These hinges are sold by the pair (2 hinges) which is normally what you need to hinge one door.
|
- Steel, yellow zinc chromate plated
- Solid Brass, natural, unfinished.
|
Pivot Hinges, Stainless Steel
|
Description:
|
Finishes: |
|
- Pivot hinges made from Type 430 stainless steel.
- These pivot hinges are available in both Left Hand and Right Hand models and are available in two sizes.
- May be used as 270 degree hinges if the pivot point is located just outside of the cabinet corner.
- Available in two sizes; the small size fits up to a 11/16" thick door, the large size fits up to a 7/8" thick door.
- For each door you are hinging order one left hand hinge and one right hand hinge.
- Each hinge uses 4 to 6 each #4 flat head screws, not included but offered for purchase during checkout.
|
|
|
Pivot Door Slides
|
Description:
|
|
|
- For entertainment centers, armoires and kitchen cabinets. Allows the door to open to 90 degrees and slide back into the inside of the cabinet
- For door heights up to 42" tall
- For door thickness of 5/8" to 13/16"
- Maximum door weight is 30 lbs.
- For "inset" cabinets without a face frame or "overlay" cabinets with a face frame.
- For "non-face frame overlay" applications add a Non-Face Frame Overlay Hinge Kit (order our number 268119)
- Sold by the set. Purchase one set for each door.
- Can be used for vertical or horizontal doors
- complete with all hardware
- To see the instruction sheets for this product click on Page 1, 2 and 3 below.
|
Non-face Frame Overlay Hinge Kit
|
Description:
|
|
|
- This hinge kit works with our Pivot Door Slides for "Overlay Applications" where there is no face frame.
- For more information on this item see our "Pivot Door Slides" and click on the Technical Info link
- These items require a 40mm cup drilled in the door to install.
- A set includes 2 hinges. One set is needed per door.
|
Heavy Duty Pivot Door Slides
|
Description:
|
|
|
- For entertainment centers, armoires, and kitchen cabinets. Allows the door to open to 90 degrees and then slide back into the inside of the cabinet.
- This hardware works on frameless (no face frame) cabinets only.
- Hardware includes "AntiRak Cable System"
- For door heights from 36" to 78"
- This product will work for 3 different installation types;
- Type 1 is an "overlay" door (no face frame) with a 3/4" door thickness. Order our Type 1 hinge kit (SKU 268173) for this installation type.
- Type 2 is a "flush inset" door (no face frame) with a door thickness from 3/4" to 13/16". Order our Type 2 hinge kit (SKU 268171) for this installation type.
- Type 3 is a a "flush inset" door (no face frame) with a door thickness from 15/16" to 1-1/4". Order our Type 3 hinge kit (SKU 268172) for this installation type.
- Maximum door weight is 75 lbs.
- Can be used for vertical or horizontal doors.
- A 2" to 2-1/2" wide pocket is required. The pocket is the area that the door slides into.
- An 8 page instruction booklet is included with purchase.
- This product is sold by the pair. Order one pair for each door that you are hanging.
- PLEASE NOTE: THE FOLLOWING ADDITIONAL HARDWARE IS REQUIRED;
- HINGE CARRIER STRIP KITS
- HINGE KITS (Type 1, 2 or 3)
- SEE THOSE ITEMS FOR MORE INFORMATION
|
Type 1 Hinge Kit for Heavy Duty Pivot Door Slides
|
Description:
|
Finishes: |
|
- This hinge kit works with our Heavy Duty Pivot Door Slides.
- It is used for "overlay" doors (no face frame) with a 3/4" door thickness.
- These hinges require a 40mm cup to be drilled in the door.
- They are sold by the set. A set includes 2 hinges, 2 mounting plates, mounting plate spacers, all necessary screws and mounting plate covers.
- Use 3 hinges per door for door heights from 36" to 47".
- Use 4 hinges per door for door heights from 47" to 59".
- Use 5 hinges per door for door heights from 59" to 71".
- Use 6 hinges per door for door heights over 71".
|
|
Type 2 Hinge Kit (Black) for Heavy Duty Pivot Door Slides
|
Description:
|
|
|
- This hinge kit works with our Heavy Duty Pivot Door Slides.
- It is used for "flush inset" doors (no face frame) with a door thickness from 3/4" to 13/16".
- For overlay doors or doors thicker than 13/16" use our Type 3 Hinge Kit (SKU 268172).
- These hinges require a 35mm cup to be drilled in the door.
- They are sold by the set. A set includes 2 hinges, 2 mounting plates, mounting plate spacers, all necessary screws and mounting plate covers.
- Use 3 hinges per door for door heights from 36" to 47".
- Use 4 hinges per door for door heights over 47" to 59".
- Use 5 hinges per door for door heights over 59" to 71".
- Use 6 hinges per door for door heights over 71".
|
Type 3 Hinge Kit for Heavy Duty Pivot Door Slides
|
Description:
|
|
|
- This hinge kit works with our Heavy Duty Pivot Door Slides.
- It is used for "flush inset" doors (no face frame) with a door thickness from 15/16" to 1-1/4".
- These hinges require a 40mm cup to be drilled in the door.
- They are sold by the set. A set includes 2 hinges, 2 mounting plates, mounting plate spacers, all necessary screws and mounting plate covers.
- Use 3 hinges per door for door heights from 36" to 47".
- Use 4 hinges per door for door heights over 47" to 59".
- Use 5 hinges per door for door heights over 59" to 71".
- Use 6 hinges per door for door heights over 71".
|
Hinge Carrier Strip for Heavy Duty Pivot Door Slides
|
Description:
|
|
|
- This hinge carrier strip kit works with our Heavy Duty Pivot Door Slides
- Each carrier strip measures approximately 29" by 4"
- They are sold by the set. A set includes 2 carrier strips, 3 connector clips, and all necessary screws.
- Use 2 strips per door for door heights from 36" to 56"
- Use 3 strips per door for door heights over 56"
|
35mm Forstner Bit for Euro Hinges
|
Description:
|
|
|
- High speed steel forstner bit for cutting 35mm (1-3/8") cup for European hinges.
- Fits 3/8" drill chuck.
- Product works best with a drill press however it is possible to use it with a portable power drill.
- Made by Bosch.
- PLEASE NOTE: This product is meant for use on hardwoods and softwoods. It is not meant for use on particle board or MDF materials. It is actually sized as a 1-3/8" cutter. This size works perfectly for a 35mm European hinge.
- For Amerock, Belwith, Blum, Grass, Liberty, Mepla, Hafele and other hinges
- PLEASE NOTE: Our normal return policy does not apply to this item. This item is NOT returnable.
|
40mm Bit for European Hinges
|
Description:
|
|
|
- Carbide tipped drill bit for cutting 40mm holes for European hinges.
- Fits 3/8" drill chuck.
- Bit is 2-3/16" in length.
- PLEASE NOTE; Our normal return policy does not apply to this item. This item is NOT returnable.
|
|
2 Inch 270 Degree Hinge
|
Description:
|
Finishes: |
|
- Entertainment center hinge for overlay doors.
- Allows doors to open 270 degrees when installed in the "full overlay" position.
- Hinge measures 2" tall (joint length). Wrap around for back of door is 1.5". Wrap around for side panel is 15/16".
- Hinge is made for 3/4" thick door and 3/4" side panels.
- Steel base material.
- Each hinge uses 6 each #6 flat head screws (not included but offered for purchase during checkout).
- PLEASE NOTE; we have not been able to find a black screw for this hinge. We recommend using a steel plated screw and daubing it with black paint after installation.
|
- Polished Nickel
- Black
- Antique Brass
|
270 Degree Hinge with Ball Tips
|
Description:
|
Finishes: |
|
- Entertainment center hinge for overlay doors.
- Allows doors to open 270 degrees when installed in the "full overlay" position.
- Hinge measures 2.5" tall (joint length). Wrap around the back of the door is 1.5". Wrap around the side panel is 3/4".
- Hinge is made for a 3/4" thick side panel and a 3/4" thick door.
- Steel base material.
- Each hinges uses 6 each #6 flat head screws (not included but offered for purchase during checkout).
|
|
270 Degree Overlay Hinge (5/8"-7/8" Door Thickness)
|
Description:
|
Finishes: |
|
- 270 degree opening hinge for cabinets with overlay doors.
- Designed for TV and entertainment units which need wide opening doors.
- Opens 270 degrees for unobstructed view when installed as a "full overlay" hinge (hinge pin needs to be at the corner of the cabinet).
- Can be recessed (mortised) into door for a sleek look.
- For doors 5/8" thick if the hinge is not mortised into the door and 7/8" if the hinge is mortised into the door.
- Solid brass base material.
- Hinge dimension: 1-9/16" tall, projects out from cabinet surface 1", attachment to backside of door is 1-3/8".
- Uses #6 flat head screws, 5 each per hinge (screws are not included but they are offered for purchase during checkout.)
- Hinge shown in photo is the Polished Brass hinge. All parts of the hinge that are visible after installation are either a highly polished brass or a beautiful satin nickel.
|
- Polished brass
- Satin Nickel
|
270 Degree Overlay Hinge (3/4"-15/16" Door Thickness)
|
Description:
|
Finishes: |
|
- 270 degree hinge for cabinets with overlay doors.
- Designed for TV and entertainment units which need wide opening doors.
- Opens 270 degrees for unobstructed view when installed as a "full overlay" hinge (hinge pin needs to be at the corner of the cabinet).
- Can be recessed (mortised) into door for a sleek look.
- For doors 3/4" thick if the hinge is not mortised into the door and 15/16" if the hinge is mortised into the door.
- Solid brass base material.
- Hinge dimension: 1-9/16" tall, projects out from cabinet surface 1-5/16", attachment to backside of door is 1-3/8".
- Uses #6 flat head screws, 5 each per hinge (screws are not included but they are offered for purchase during checkout).
- Hinge shown in photo is the Polished Brass hinge. All parts of the hinge that are visible after installation are either a highly polished brass or a beautiful satin nickel.
|
- Polished Brass
- Satin Nickel
|
270 Degree Partial Wrap Hinge
|
Description:
|
Finishes: |
|
- Ideal for TV and entertainment units which need wide opening doors.
- For frameless (no face frame) cabinets with overlay doors.
- Opens 270 degrees for unobstructed view.
- For 5/8” thick door and 5/8” thick side panel.
- Steel base material
- Uses our #286-254 , 5 x 5/8” bronze plated screws (6 each per hinge, not included but screws are offered for purchase during checkout)
|
|
270 Degree Entertainment Center Hinge
|
Description:
|
Finishes: |
|
- Entertainment center hinge for overlay doors
- Allows door to open 270 degrees
- Joint length is 2-3/4"
- Hinge is made for 3/4" door thickness and 3/4" side panel thickness (for cabinets without a face frame)
- Door wrap around distance is 1-3/8"
- Side panel wrap around distance is 1-7/8"
- Steel base material
- Uses 8 each #8 flat head screws per hinge (not included). Screws are offered for purchase during checkout. Please note; we do not stock a black screw for the black hinge. We are offering a steel screw which can be dabbed with black paint after installation.
|
- Brass plated
- Gloss Black
- Satin Stainless Steel
- Dull Chrome
|
Pivot Hinge 270 Degree
|
Description:
|
Finishes: |
|
- Made for overlay cabinet doors up to 1” thick
- Hinge pivots 270 degrees
- The plate that attaches to the cabinet measures 1-1/4" x 1". The plate that attaches to the door measures 1-3/8" x 7/8". The pivot point projects out 1-7/16" from the cabinet surface
- Steel base material
- Screws not included
- Uses 12 each #6 screws per pair of hinges(not included). We have not been able to find an exact finish match for the screws. We offer solid brass screws upon checkout which is fairly good match for the finish but not an exact match.
|
|
3/4" Partial Wrap Hinges-
|
Description:
|
Finishes: |
|
- For full inset doors where doors are 3/4" in thickness
- "No-mortise" type hinge does not require mortising the door or frame
- These hinges work well for entertainment center doors with "articulated" doors
- Door gap as small as 1/16" because of no-mortise style
- Non-self closing
- Hinge is 2-1/2" tall. From tip to tip it is 2-3/4"
- Base material is steel (except on Solid Brass model)
- Screw holes are slotted for easy vertical and horizontal adjustment
- Screws are included
|
- Satin nickel
- Dark Antique English
- Burnished Brass
- Antique English
- Wrought Iron
- Polished Brass
- Solid Brass
- Oil Rubbed Bronze
|
Overlay Hinge, No-Mortise, 3 Inch
|
Description:
|
Finishes: |
|
- For cabinets with overlay doors. Will open to 270 degrees.
- Hinge is 3" tall and is made for doors that are from 1" to 1-1/8" thick.
- Wrap around part of hinge leaf measures 7/8".
- Hinge pin is removeable so that hinge will work as a left hand or right hand hinge.
- Uses #6 flat head screws, not included but offered for purchase during checkout.
- Made from steel base material.
|
|
270 Degree 3" Overlay Hinge
|
Description:
|
Finishes: |
|
- For cabinets with overlay doors
- This hinge will allow doors to open 270 degrees for an unobstructed view when installed as a "full overlay" hinge (hinge needs to be placed at the corner of the cabinet).
- For doors that are 1" to 1-1/4" thick.
- This hinge needs at least 1" of face frame or side wall edge for the hinge to mount to (the bent part of the hinge measures 1")
- Steel base material.
- Hinge shown in photo is the Brass plated finish.
- Matching wood screws are included.
|
- Brass Plated
- Antique Brass
|
3/4" Full Wrap Hinges-
|
Description:
|
Finishes: |
|
- For full inset doors where door and face frame are 3/4" in thickness
- "No-mortise" type hinge does not require mortising the door or frame
- These hinges work well for entertainment center doors with "articulated" doors
- Door gap as small as 1/16" because of no-mortise style
- Non-self closing
- Hinge is 2-1/4" tall. From tip to tip it is 2-3/4"
- Base material is steel (except on Solid Brass model)
- Screw holes are slotted for easy vertical and horizontal adjustment
- Screws are included
|
- Satin nickel
- Dark Antique English
- Antique English
- Wrought Iron
- Polished Brass
- Solid Brass
- Oil Rubbed Bronze
|
Aximat Hinges
|
Description:
|
|
|
Aximat hinges are available in a 270 degree opening hinge for entertainment center cabinets. |
Pivot Door Slides
|
Description:
|
Finishes: |
|
- For entertainment centers, armoires and kitchen cabinets. Allows the door to open to 90 degrees and slide back into the inside of the cabinet
- For door heights up to 42" tall
- For door thickness of 5/8" to 13/16"
- Maximum door weight is 30 lbs.
- For "inset" cabinets without a face frame or "overlay" cabinets with a face frame.
- For "non-face frame overlay" applications add a Non-Face Frame Overlay Hinge Kit (order our number 268119)
- Sold by the set. Purchase one set for each door.
- Can be used for vertical or horizontal doors
- complete with all hardware
|
|
Non-face Frame Overlay Hinge Kit
|
Description:
|
Finishes: |
|
- This hinge kit works with our Pivot Door Slides for "Overlay Applications" where there is no face frame.
- For more information on this item see our "Pivot Door Slides" and click on the Technical Info link
- These items require a 40mm cup drilled in the door to install.
- A set includes 2 hinges. One set is needed per door.
|
|
Heavy Duty Pivot Door Slides
|
Description:
|
Finishes: |
|
- For entertainment centers, armoires, and kitchen cabinets. Allows the door to open to 90 degrees and then slide back into the inside of the cabinet.
- This hardware works on frameless (no face frame) cabinets only.
- Hardware includes "AntiRak Cable System"
- For door heights from 36" to 78"
- This product will work for 3 different installation types;
- Type 1 is an "overlay" door (no face frame) with a 3/4" door thickness. Order our Type 1 hinge kit (SKU 268173) for this installation type.
- Type 2 is a "flush inset" door (no face frame) with a door thickness from 3/4" to 13/16". Order our Type 2 hinge kit (SKU 268171) for this installation type.
- Type 3 is a a "flush inset" door (no face frame) with a door thickness from 15/16" to 1-1/4". Order our Type 3 hinge kit (SKU 268172) for this installation type.
- Maximum door weight is 75 lbs.
- Can be used for vertical or horizontal doors.
- A 2" to 2-1/2" wide pocket is required. The pocket is the area that the door slides into.
- An 8 page instruction booklet is included with purchase.
- This product is sold by the pair. Order one pair for each door that you are hanging.
- PLEASE NOTE: THE FOLLOWING ADDITIONAL HARDWARE IS REQUIRED;
- HINGE CARRIER STRIP KITS
- HINGE KITS (Type 1, 2 or 3)
- SEE THOSE ITEMS FOR MORE INFORMATION
|
|
Type 1 Hinge Kit for Heavy Duty Pivot Door Slides
|
Description:
|
Finishes: |
|
- This hinge kit works with our Heavy Duty Pivot Door Slides.
- It is used for "overlay" doors (no face frame) with a 3/4" door thickness.
- These hinges require a 40mm cup to be drilled in the door.
- They are sold by the set. A set includes 2 hinges, 2 mounting plates, mounting plate spacers, all necessary screws and mounting plate covers.
- Use 3 hinges per door for door heights from 36" to 47".
- Use 4 hinges per door for door heights from 47" to 59".
- Use 5 hinges per door for door heights from 59" to 71".
- Use 6 hinges per door for door heights over 71".
|
|
Type 2 Hinge Kit (Black) for Heavy Duty Pivot Door Slides
|
Description:
|
Finishes: |
|
- This hinge kit works with our Heavy Duty Pivot Door Slides.
- It is used for "flush inset" doors (no face frame) with a door thickness from 3/4" to 13/16".
- For overlay doors or doors thicker than 13/16" use our Type 3 Hinge Kit (SKU 268172).
- These hinges require a 35mm cup to be drilled in the door.
- They are sold by the set. A set includes 2 hinges, 2 mounting plates, mounting plate spacers, all necessary screws and mounting plate covers.
- Use 3 hinges per door for door heights from 36" to 47".
- Use 4 hinges per door for door heights over 47" to 59".
- Use 5 hinges per door for door heights over 59" to 71".
- Use 6 hinges per door for door heights over 71".
|
|
Type 3 Hinge Kit for Heavy Duty Pivot Door Slides
|
Description:
|
Finishes: |
|
- This hinge kit works with our Heavy Duty Pivot Door Slides.
- It is used for "flush inset" doors (no face frame) with a door thickness from 15/16" to 1-1/4".
- These hinges require a 40mm cup to be drilled in the door.
- They are sold by the set. A set includes 2 hinges, 2 mounting plates, mounting plate spacers, all necessary screws and mounting plate covers.
- Use 3 hinges per door for door heights from 36" to 47".
- Use 4 hinges per door for door heights over 47" to 59".
- Use 5 hinges per door for door heights over 59" to 71".
- Use 6 hinges per door for door heights over 71".
|
|
Hinge Carrier Strip for Heavy Duty Pivot Door Slides
|
Description:
|
Finishes: |
|
- This hinge carrier strip kit works with our Heavy Duty Pivot Door Slides
- Each carrier strip measures approximately 29" by 4"
- They are sold by the set. A set includes 2 carrier strips, 3 connector clips, and all necessary screws.
- Use 2 strips per door for door heights from 36" to 56"
- Use 3 strips per door for door heights over 56"
|
|
|
Solid Brass Hinges with Ball Tip
|
Description:
|
Finishes: |
|
- These hinges are very high quality solid brass hinges (extruded brass).
- The tips on these hinges screw on and off and the hinge pins are removable.
- Designed for installation on cabinets with a minimum 3/4” thickness.
- PLEASE NOTE; Hole patterns vary according to size of hinge.
- Solid brass base material.
- Matching flat head screws are included.
|
- Polished Brass
- Dark Bronze
|
Solid Brass Cabinet Hinges with Ball Tips
|
Description:
|
Finishes: |
|
- These hinges are very high quality solid brass hinges (extruded brass)
- The tips on these hinges screw on and off and the hinge pins are removable.
- They come complete with matching solid brass philips head wood screws
- All hinges have 6 screw holes per hinge except for the 1.5" by 1.5" which have 4 holes per hinge
- All hinges have beautiful ball tip finials
- Solid brass base material
|
- Polished Chrome
- Antique Brass
- Satin Nickel
|
Ball Tipped Hinges, Solid Brass
|
Description:
|
Finishes: |
|
- Beautiful ball tipped cabinet hinge available in 10 different finishes.
- Made from solid brass.
- May be installed as a surface mounted hinge or as a full mortise hinge (3/4" to 1" door thickness).
- Hinge measures 1-15/16" tall by 1-9/16" wide.
- Features oblong holes which allow vertical and horizontal adjustment of hinge.
- Click on "Finish Chart" to view available finishes.
- Matching wood screws are included.
|
- Iron / Pewter
- Satin Nickel
- Oil Rubbed Bronze
- Polished Nickel
- Old Copper
- Flat Black
- Polished Brass
- Venetian Bronze
- Gloss Oil Rubbed Bronze
- Polished Chrome
|
Steel Ball Tipped Hinges
|
Description:
|
Finishes: |
|
- Very nice ball tipped hinge made from steel.
- Available in four finishes. The upper left hand hinge shown in the photo is the Oil Rubbed Bronze, (moving clockwise) Polished Brass, Polished Nickel, Satin Nickel.
- Hinge thickness is 0.059".
- Joint length means distance along hinge pin not including the ball tips.
- Photos to left show the 2-7/16" tall hinge with 6 screw holes per hinge. The 1-15/16" hinge has 4 screw holes per hinge.
- Matching flat head screws are included.
- PLEASE NOTE: These hinges have a loose pin. If the hinge is installed with the hinge pin in a vertical position, install the hinge so that the hinge pin can be pulled out from the top of the hinge rather than the bottom.
|
- Oil Rubbed Bronze
- Polished Brass
- Satin Nickel
- Polished Nickel
|
Ball-Tipped Hinges, Solid Brass
|
Description:
|
Finishes: |
|
- Beautifully finished with ball tips on each end
- Made from Solid brass
- Number of screw holes varies with hinge size
- Matching flat head screws are included
|
- Polished Brass
- Antique Brass
|
Ball Tipped Hinges, Steel
|
Description:
|
Finishes: |
|
- Very nice ball tip hinge made from steel.
- Available in five finishes.
- Hinge thickness is 0.040".
- Joint length means distance along hinge pin not including ball tips.
- Matching flat head screws are included.
- PLEASE NOTE: SKU 504525 is actually made from solid brass but since the screws that come with it are made from steel we must include this hinge in the steel hinge section.
|
- Polished Brass
- Oil Rubbed Bronze
- Satin Nickel
- Polished Nickel
- Antique Brass
|
|
Cook Book Holder, Undercabinet
|
Description:
|
Finishes: |
|
- Under cabinet cook book holder allows cook book storage underneath your kitchen cabinet. To use cook book simply pull down the front of the holder and your cook book can be viewed at the perfect angle.
- The cook book holder uses a compound action hinge with springs to hold it in both the open and closed position.
- Clear acrylic cook book platform measures 18-1/4" wide by 9-1/4" deep.
- In the open position the bottom of the cook book holder is 11-1/2" from the underside of the cabinet (downward projection).
- In the closed position the bottom of the cook book holder is 3" from the underside of the cabinet.
- To properly install the cook book holder it needs 20.5" of width and 10.5" of depth under the cabinet.
- Mounting screws and installation instructions are included.
|
|
Stainless Steel Drawer & Cabinet Pulls
|
Description:
|
Finishes: |
|
- Stainless steel pulls for drawers and cabinets.
- Available in sizes ranging from 5" to 56.5" long.
- All sizes have two attachment legs except for the two largest sizes (46" and 54") which have 3 attachment legs.
- The "center-to-center" dimension refers to the distance between the center of the screwholes of the attachment legs.
- The diameter of the pull is approximately 1/2" (actual dimension is 12mm).
- The projection (or height) of the pull is 1.3".
- Made from solid stainless steel.
- Two sets of screws are included. One set is 1-1/8" long. The second set is 1-7/16" long. PLEASE NOTE; screws are made from plated steel.
|
|
Tip-Out Tray Hinges
|
Description:
|
Finishes: |
|
- These hinges allow the cabinet panel that is found in front of a kitchen sink to tip out 45 degrees.
- This item is the replacement pair of hinges only, if you need the trays and hinges see our Tip-Out Tray Kits
|
|
Tip-Out Tray Kits
|
Description:
|
Finishes: |
|
- This product consists of 2 trays and 2 pair of hinges and the instructions that allow you to convert the cabinet panel in front of your kitchen sink into a tip-out tray for extra storage.
- Each tray measures 11" long by 3-3/4" high by 2-1/16". deep
- Screws are included.
|
- Trays are white plastic
- Hinges are zinc chromate plated
|
Cabinet Door Restraint
|
Description:
|
Finishes: |
|
- This device may be used for limiting the swing of a cabinet door anywhere from 0 to slightly more than 90 degrees depending on how you elect to install the mounting plates.
- A typical installation would be to mount the right angle swivel plate on the inside surface of the door and to mount the second plate on the underside of a shelf or the underside of the top of the cabinet.
- Available in a "Left Hand" or "Right Hand" model.
- Use a "Right Hand" model if your door is hinged on the right hand side of the cabinet as you are facing the cabinet.
- This device may also be used to support drop down desk tops. If ordering for use as a drop down desk support, order one "Left Hand" and one "Right Hand" model.
- Uses 2 each #4 flat head screws (not included but offered for purchase during checkout).
- PLEASE NOTE: the photos to the left show the product in a vertical position. When used as a cabinet restraint they will be installed in a horizontal positon.
|
|
Restraint Chain for Cabinet Doors
|
Description:
|
Finishes: |
|
- Restrain chain for cabinet doors will keep your door from opening too far. Keeps doors from hitting other doors, glass panels, television monitors, etc.
- The overall length is 8-1/4".
- The attachment plates measure 5/16" x 1".
- Made from solid brass. The two retaining pins that hold the chain to the attachment plates have steel pins.
- Each chain uses four each #4 flat head wood screws. Not included but offered for purchase during checkout.
|
|
12" Restraint Chain for Cabinet Doors
|
Description:
|
Finishes: |
|
- Restraint chain for cabinet doors will keep your door from opening too far. Keeps doors from hitting other doors, glass panels, TV monitors,etc.
- Overall length is 12".
- The attachment plates measure 1.5" x 1".
- Made from steel base material.
- Matching wood screws are included.
|
- Brass Plated
- Nickel Plated
|
Double Magnetic Cabinet Catch
|
Description:
|
Finishes: |
|
- Double magnetic catch is used for double door cabinets
- Magnetic catches are used on cabinets with free swinging (non self-closing) hinges
- Measures 3-3/8" long by 1" wide by 1/2" tall
- Steel base material
- Mounting screws are included
|
|
Brown Plastic Magnetic Catch
|
Description:
|
Finishes: |
|
- Used on cabinets with free swinging (non-self closing) doors
- Catch measures 2" long by 1-1/4" wide by 1/2" tall
- Mounting screws are included
- Plastic and steel base material
|
|
Aluminum Magnetic Catch
|
Description:
|
Finishes: |
|
- Magnetic catches are used on cabinets with free swinging (non self-closing) hinges
- Catch measures 2" long by 1-1/4" wide by 5/8" tall
- Aluminum base material
- Mounting screws are included
|
|
Magnetic Touch Latch
|
Description:
|
Finishes: |
|
- Magnetic touch latch for cabinet doors
- When you push in on cabinet door, door pops out and is released from magnetic hold.
- Includes mounting screws and steel plate for inside of cabinet door.
- Size is approximately 1-3/4" long by 1-3/4" wide by 3/4" projection.
|
- Brown plastic
- White Plastic
|
Secret Gate Latch
|
Description:
|
Finishes: |
|
- It is known as a "Secret Gate Latch" but it is actually more of a cabinet latch.
- It is used in banks, offices, restaurants and bars as a latch to secure a hinged countertop.
- Because the button to unlatch it is not obvious it acts as a low security device.
- It can be used on any hinged device where you can reach around and access the button on the latch.
- Made from aluminum with some steel parts.
- Latch is reversible (open device and flip latch over to reverse)
- Gap must be no more than 1/4" for latch to work (latch projects 3/8").
- Latch is 3.5" long and 2" wide. Strike is 3/4" long and 2" wide. Latch is approximately 5/8" thick.
- Oval head wood screws are included.
|
- Sprayed Aluminum Finish (similiar to polished chrome)
|
Flush Pulls, Solid Brass
|
Description:
|
Finishes: |
|
- A flush ring pull allows you to mortise the pull into the door so that it is completely flush with the door surface.
- Available in two sizes; Small and Large.
- The Small size measures 1-3/8" wide by 1-3/4" tall by 7/16" thick (approximate mortise depth).
- The Large size measures 1-15/16" wide by 2-1/2" tall by 1/2" thick (approximate mortise depth).
- Made from solid brass base material.
- Matching wood screws are included.
|
- Satin Nickel
- Oil Rubbed Bronze
- Polished Brass
|
Cabinet Knobs, Brushed Stainless Steel
|
Description:
|
Finishes: |
|
- Cabinet knobs made from solid stainless steel with a brushed or satin finish.
- Available in two sizes; small and large.
- Small size measures 1" in diameter, 7/8" tall with a 3/4" diameter base.
- Large size measures 1-3/16" in diameter, by 15/16" tall with a 13/16" diameter base.
- A 1-3/16" long machine screw is included. PLEASE NOTE; the machine screw is made from plated steel, not stainless steel.
|
|
Tee Cabinet Pull, Satin Stainless Steel
|
Description:
|
Finishes: |
|
- Tee style cabinet pull made from solid stainless steel.
- Pull measures 2" wide by 1-1/2" tall.
- Made from 3/8" and 1/2" diameter material.
- PLEASE NOTE; two different length machine screws are included (1-1/8" and 1-1/2") but they are made from plated steel not solid stainless steel.
|
|
Stainless Steel Finger Flush Pull
|
Description:
|
Finishes: |
|
- Solid stainless steel finger pull for sliding cabinet doors, pocket doors, etc.
- May be flush mounted.
- Pull measures 2-3/4" tall by 15/16" wide. Plate thickness is 1/8". Fits in a 7/8" deep cutout.
- Wood screws are included.
|
|
|
|
|
